NTISthis.com

Evidence Guide: PMAOPS305B - Operate process control systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

PMAOPS305B - Operate process control systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work.

  1. Identify work requirements
  2. Identify and control hazards
  3. Coordinate with appropriate personnel
Identify work requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify and control hazards

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Coordinate with appropriate personnel

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Use operator interface.

  1. Use keyboards, track ball and monitor and/or stand alone controllers to access control system/panel
  2. Monitor the process using the operator interfaces
  3. Select appropriate controller modes
  4. Access historical data and information
  5. Acknowledge messages and alarms.
Use keyboards, track ball and monitor and/or stand alone controllers to access control system/panel

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Monitor the process using the operator interfaces

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Select appropriate controller modes

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Access historical data and information

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Acknowledge messages and alarms.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Access control information.

  1. Obtain relevant data and information from the control system by applying systems knowledge
  2. Identify the status of individual pieces of equipment from the control panel and use information to identify potential faults
  3. Minimise fluctuations and variations in process through the interpretation of existing trends and control schematics
  4. Record process variations/irregularities to procedures.
Obtain relevant data and information from the control system by applying systems knowledge

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify the status of individual pieces of equipment from the control panel and use information to identify potential faults

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Minimise fluctuations and variations in process through the interpretation of existing trends and control schematics

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Record process variations/irregularities to procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Control process variations and monitor operations.

  1. Use historical data to assist the identification of problems
  2. Process available information to identify potential faults
  3. Undertake required set point/output changes to meet plant and process requirements
  4. Optimise plant operating conditions in accordance with guidelines
  5. Adjust production in response to test results and control panel information
  6. Monitor key process and environmental variables and take appropriate action
  7. Adjust controller settings in accordance with procedures
  8. Use fine tuning software as appropriate
  9. Coordinate with up stream and downstream units as appropriate
  10. Record adjustments and variations to specifications/schedules
  11. Communicate to appropriate personnel as required.
Use historical data to assist the identification of problems

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Process available information to identify potential faults

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Undertake required set point/output changes to meet plant and process requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Optimise plant operating conditions in accordance with guidelines

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Adjust production in response to test results and control panel information

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Monitor key process and environmental variables and take appropriate action

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Adjust controller settings in accordance with procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Use fine tuning software as appropriate

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Coordinate with up stream and downstream units as appropriate

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Record adjustments and variations to specifications/schedules

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Communicate to appropriate personnel as required.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Facilitate planned and unplanned process start-ups and shut-downs.

  1. Select and apply procedures to planned startup and shutdown processes
  2. Select and apply procedures to unplanned shutdown processes
  3. Implement all required emergency responses
  4. Communicate necessary information to all personnel affected by events
  5. Log all required information.
Select and apply procedures to planned startup and shutdown processes

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Select and apply procedures to unplanned shutdown processes

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Implement all required emergency responses

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Communicate necessary information to all personnel affected by events

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Log all required information.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Respond to alarms or out of specification conditions.

  1. Identify system(s) affected by the alarm or condition
  2. Interpret alarms and prioritise actions to be taken
  3. Take appropriate action to respond to the alarm or incident
  4. Deal with any out of specification material in accordance with procedures
  5. Communicate the problem/solution to appropriate personnel
  6. Record the information as required
  7. Provide details of the alarm and action taken to the next shift at change over
Identify system(s) affected by the alarm or condition

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Interpret alarms and prioritise actions to be taken

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Take appropriate action to respond to the alarm or incident

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Deal with any out of specification material in accordance with procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Communicate the problem/solution to appropriate personnel

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Record the information as required

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Provide details of the alarm and action taken to the next shift at change over

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Assessment of this unit should include demonstrated competence on actual plant and equipment in a work environment. The unit will be assessed in as holistic a manner as is practical and may be integrated with the assessment of other relevant units of competency. Assessment will occur over a range of situations, which will include disruptions to normal, smooth operation.

Simulation may be required to allow for assessment of parts of this unit. Simulation should be based on the actual plant and will include walk-throughs of the relevant competency components. Simulations may also include the use of case studies/scenarios, role plays and 3D virtual reality interactive systems. In the case of evacuation training or of training for competencies practiced in life threatening situations, simulation may be used for the bulk of the training.

This unit of competency requires an application of the knowledge contained in the use of the process control system and its integral equipment, to the level needed to maintain control and recognise and resolve problems. This can be assessed through questioning and the use of what-if scenarios both on the plant (during demonstration of normal operations and walk-throughs of abnormal operations) and off the plant.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Competence must be demonstrated in the ability to recognise and analyse potential situations requiring action and then in implementing appropriate responses. The emphasis should be on the ability to stay out of trouble rather than on recovery from a disaster.

Consistent performance should be demonstrated. In particular look to see that:

early warning signs of equipment/processes needing attention or with potential problems are recognised

the range of possible causes can be identified and analysed and the most likely cause determined

appropriate action is taken to ensure a timely return to full performance

obvious problems in related plant areas are recognised and an appropriate contribution made to their solution.

These aspects may be best assessed using a range of scenarios/case studies/what-ifs as the stimulus with a walk-through forming part of the response. These assessment activities should include a range of problems, including new, unusual and improbable situations, which may have been generated from the past incident history of the plant, incidents on similar plants around the world, hazard analysis activities and similar sources.

Context of and specific resources for assessment

Assessment will require access to a process control system over an extended period of time, or a suitable method of gathering evidence of operating ability over a range of situations. A bank of scenarios/case studies/what-ifs will be required as will a bank of questions which will be used to probe the reasoning behind the observable actions.

Method of assessment

In all plants it may be appropriate to assess this unit concurrently with relevant teamwork, communication and leadership units.

Guidance information for assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Required Skills and Knowledge

This describes the essential skills and knowledge and their level, required for this unit.

Required skills

Competence includes the ability to distinguish between causes of problems/alarms/fault indications such as:

instrument failure/malfunction

electrical failure/malfunction

mechanical failure/malfunction

equipment design deficiencies

product parameters (temperature, flows, pressure and levels)

process control system malfunction

power/utility failures.

An ability to communicate with other work groups and personnel during the operation and monitoring of this panel is considered an essential Element of this unit of competency.

Required knowledge

The knowledge referred to in the Evidence Guide for this unit includes:

the architecture and location of the process/production equipment

specific plant process operations

interactions between plant items/processes

product specifications and tolerances

systems operating parameters

system integrity limits

process control philosophies and strategies

emergency shutdown procedures

process specific physics, chemistry and mathematics

basic science of upstream and downstream processes

relevant chemistry of the process to the level of interpreting chemical equations and manipulating factors controlling rate of reaction and yield (or equivalent physics for a physical process/biochemistry for a biochemical process) - chemistry to include both intended products and interfering reactions, eg salts, hydrates

impact of external factors, eg variations in weather, feed etc

process drawings, eg P&ID, PFD

cause and effect

basis of control for the plant/s

instrumentation and control systems, including feed forward, feed back and open control

instrumentation and control system components, eg relevant primary sensing devices, final control elements, transducers/transmitters

control loops, including PID control, set points, controlled variable, indicated variable

interaction between multiple control loops, including cascade control

impacts of changing controller settings and the limits within which changes can be made

effective communication techniques

organisation procedures

UPS and its applications and use.

Range Statement

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicized wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.

Codes of practice/ standards

Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.

Context

This unit of competency includes all such items of equipment and unit operations which form part of the control system. For your control room this may include (select relevant items):

process control systems, eg Distributed Control Systems

personal computers

printers

fire and gas detection/protection systems

emergency shutdown systems

communications systems.

Typical problems for your plant may include:

loss of power/utilities

analysing failure modes

variation/loss of feed

unstable control of pressure, temperature level and flows

control equipment failure

process plant trips

change in atmospheric conditions (rain, temperature, wind, lightning)

emergency situations.

Alarms or abnormal conditions

Alarms or other abnormal conditions includes:

emergency, including emergency shut down

partial or complete controller failure.

Other problems

Other problems includes:

problem solving control functions

Appropriate action

Appropriate action includes:

determining problems needing action

determining possible fault causes

rectifying problem using appropriate solution within area of responsibility

following through items initiated until final resolution has occurred

reporting problems outside area of responsibility to designated person.

Health, safety and environment (HSE)

All operations to which this unit applies are subject to stringent health, safety and environment requirements, which may be imposed through State or Federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between Performance Criteria and HSE requirements, the HSE requirements take precedence.