The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Establish requirements for the finishing process
|
|
Identify work requirements from procedures Completed |
Evidence:
|
Assemble equipment and consumables for the finishing process Completed |
Evidence:
|
Consult workplace procedures and safety data sheets (SDS) to confirm the work planning process Completed |
Evidence:
|
Ensure safety equipment is available and in sound condition Completed |
Evidence:
|
Remove products from equipment, if required, using enterprise standard handling methods Completed |
Evidence:
|
Recognise end-of-product run Completed |
Evidence:
|
Check quality of product
|
|
Inspect product to identify routine and non-routine finishing requirements Completed |
Evidence:
|
Identify significant finning, flash or other quality problems and report to appropriate person for investigation of mould/die closure/alignment Completed |
Evidence:
|
Check with appropriate personnel regarding modifications to finishing process Completed |
Evidence:
|
Identify and process non-conforming products in accordance with workplace procedures. Completed |
Evidence:
|
Undertake the finishing operation
|
|
Trim product as required Completed |
Evidence:
|
Apply procedures to other finishing processes Completed |
Evidence:
|
Undertake other secondary process operations required Completed |
Evidence:
|
Follow waste and recycling procedures Completed |
Evidence:
|
Inspect finished product and compare to specifications for suitability for further processing or for customer delivery Completed |
Evidence:
|
Assemble finished products and sort in accordance with procedures Completed |
Evidence:
|
Pack as required Completed |
Evidence:
|
Record product data as required Completed |
Evidence:
|
Clean up work area and perform housekeeping Completed |
Evidence:
|
Identify and rectify routine product imperfections
|
|
Identify the range of routine imperfections that can occur during the production process Completed |
Evidence:
|
Determine and rectify routine product imperfections in accordance with procedures Completed |
Evidence:
|
Ensure appropriate records and log books are maintained to meet procedures/work instructions Completed |
Evidence:
|
Identify non-routine product imperfections and report to designated person Completed |
Evidence:
|