The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Check work requirements
|
|
Identify work requirements from production plan or request (recipe card) Completed |
Evidence:
|
Check equipment and materials including base raw materials, additives and curatives and accelerators meet requirements for job Completed |
Evidence:
|
Plan task sequences according to procedures, including noting times for checks of product quality Completed |
Evidence:
|
Identify non-conformity in materials Completed |
Evidence:
|
Recognise requirements which may not be in accordance with usual practice Completed |
Evidence:
|
Ask questions of appropriate person to confirm unusual practice Completed |
Evidence:
|
Identify hazards associated with the job and take appropriate action Completed |
Evidence:
|
Perform other pre-operational checks in accordance with procedures Completed |
Evidence:
|
Check process set-up
|
|
Check safety gates and guards are in position and working Completed |
Evidence:
|
Check materials are correct Completed |
Evidence:
|
Check control panel to ensure all variable settings are within procedures guidelines Completed |
Evidence:
|
Complete pre-start checks. Completed |
Evidence:
|
Weigh materials
|
|
Check scales are zeroed correctly Completed |
Evidence:
|
Minimise dust and rubbish in scales and feed mechanisms Completed |
Evidence:
|
Accurately weigh powders, rubber, etc, according to computer display, digital readout or other means, according to recipe card Completed |
Evidence:
|
Adjust rubber feed to ensure correct quantity delivered Completed |
Evidence:
|
Operate equipment to procedures
|
|
Start machine safely and correctly in accordance with procedures Completed |
Evidence:
|
Check to ensure mixing is occurring appropriately according to equipment operating temperature, speed, amperages and pressures Completed |
Evidence:
|
Monitor control panel in accordance with procedures Completed |
Evidence:
|
Complete logs and records as required Completed |
Evidence:
|
Notify Dump Mill Operators when the cycle is close to completion Completed |
Evidence:
|
Pause machine cycle and perform emergency stop, as required Completed |
Evidence:
|
Liaise with dump mill operator
|
|
Advise Dump Mill Operator that compound/batch is being made Completed |
Evidence:
|
Ensure that batch is sampled and correctly labelled Completed |
Evidence:
|
Communicate any non-routine process or product events to required personnel Completed |
Evidence:
|
Respond to routine problems in accordance with procedures
|
|
Recognise known faults that occur during the operation Completed |
Evidence:
|
Identify and take action on causes of routine faults Completed |
Evidence:
|
Log problems as required Completed |
Evidence:
|
Identify non-routine process and quality problems and take appropriate action Completed |
Evidence:
|