NTISthis.com

Evidence Guide: PMBPROD295B - Operate composite sheeting equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

PMBPROD295B - Operate composite sheeting equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Check work requirements.

  1. Identify work requirements from production plan or request.
  2. Check product, materials and equipment meet requirements for job(s).
  3. Recognise requirements which may not be in accordance with usual practice.
  4. Ask questions of appropriate person to confirm non standard job specifications.
  5. Ensure housekeeping is to requirements.
  6. Identify hazards associated with the job and take appropriate action.
  7. Perform other pre-operational checks in accordance with procedures.
Identify work requirements from production plan or request.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check product, materials and equipment meet requirements for job(s).

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Recognise requirements which may not be in accordance with usual practice.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Ask questions of appropriate person to confirm non standard job specifications.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Ensure housekeeping is to requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify hazards associated with the job and take appropriate action.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Perform other pre-operational checks in accordance with procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Start up composite sheeting equipment to procedures.

  1. Conduct pre-start checks on equipment.
  2. Check safety equipment is in position and working.
  3. Check moulds, closures and fittings to procedures.
  4. Check moulds for cracks, chips, marks and cleanliness.
  5. Check materials, including fibres, resins, additives and release agents are correct.
  6. Start up composites sheeting machine.
Conduct pre-start checks on equipment.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check safety equipment is in position and working.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check moulds, closures and fittings to procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check moulds for cracks, chips, marks and cleanliness.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check materials, including fibres, resins, additives and release agents are correct.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Start up composites sheeting machine.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Operate equipment to procedures.

  1. Check process is operating within required limits.
  2. Check product is in specification and to required quality standard.
  3. Ensure product is consistently ready for next operation.
  4. Maintain supply of materials as required.
  5. Complete logs and records as required.
  6. Collect and segregate scrap, waste and other materials, as required.
  7. Keep equipment and work area clean.
  8. Shut down as required.
Check process is operating within required limits.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check product is in specification and to required quality standard.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Ensure product is consistently ready for next operation.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Maintain supply of materials as required.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete logs and records as required.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Collect and segregate scrap, waste and other materials, as required.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Keep equipment and work area clean.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Shut down as required.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Respond to routine problems in accordance with procedures.

  1. Recognise known faults that occur during the operation.
  2. Identify and take action on causes of routine faults.
  3. Log problems as required.
  4. Identify non-routine problems and report to designated person.
Recognise known faults that occur during the operation.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify and take action on causes of routine faults.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Log problems as required.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify non-routine problems and report to designated person.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, the range statement and the assessment guidelines for this training package.

Overview of assessment

A holistic approach should be taken to the assessment.

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability to:

apply the required skills and knowledge to operate a composite sheeting machine

apply approved procedures.

Consistent performance should be demonstrated. For example, look to see that:

composite sheeting production standards are met consistently

all safety procedures are followed.

Assessment method and context

Assessment will occur on industrial composite sheeting machine and will be undertaken in a work-like environment.

Competence in this unit may be assessed:

by using an appropriate composite sheeting machine requiring demonstration of operation, and start/stop procedures

in a situation allowing for the generation of evidence of the ability to respond to problems

by using a suitable simulation and/or a range of case studies/scenarios

through a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Specific resources for assessment

This section should be read in conjunction with the Range Satement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.

Required Skills and Knowledge

This describes the essential skills and knowledge and their level required for this unit.

Application of knowledge of the materials, equipment and process sufficient to recognise out of specification products, process problems and materials faults.

Knowledge and ability to implement organization procedures and relevant regulatory requirements, within appropriate time constraints and work standards.

Application of the knowledge of managing risks using the hierarchy of controls applied to the composite sheeting process. Application of approved hazard control and safety procedures and the use of PPE in relation to handling materials, equipment operation and cleanup.

Knowledge of and skills in the operation of composite sheeting process and equipment sufficient for consistent production of quality products including:

production workflow sequences and materials demand

reasons for checking process control panels and reporting readings which do not conform to the work instructions

accurately monitoring equipment operation and product quality

potential effects of variations in raw materials and equipment operation in relation to quality of product

processing behaviour of polymers and the role of additives

operation of composite sheeting equipment and components

correct selection and use of equipment, materials, processes and procedures

waste management and importance of reusing non-conforming products wherever possible

the effect of unauthorised or emergency shutdown in relation to safety and production requirements

factors which may affect product quality or production output and appropriate remedies.

Competence also includes the ability to:

plan own work, including predicting consequences and identifying improvements

identify when the operator is able to rectify faults, when assistance is required and who is the appropriate source for assistance

identify and describe own role and role of others involved directly in the process.

Language, literacy and numeracy requirements

This unit requires the ability to read and interpret typical product specifications, job sheets, procedures, material labels, basic machine control panels, and safety information as provided to operators.

Writing is required to the level of completing workplace forms.

Basic numeracy is required, eg to determine how many 2 kg, 3 kg and 5 kg bags are needed to make up a requirement for 50 kg.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.

Context

This competency applies to the all composite sheeting operations within the plastics industry. It includes the operation of all relevant additional equipment where that equipment is integral to the composite sheeting process.

Procedures

All operations are performed in accordance with procedures.

Procedures include all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.

Tools and equipment

This unit of competency includes use of equipment and tools such as:

composite sheeting machine

components of composite sheeting equipment such as profiling and compaction rollers, formers

additional equipment (eg curing equipment)

controller, such as PLC if fitted

basic hand tools

material loading equipment used for loading of raw materials

relevant personal protective equipment.

Hazards

Typical hazards include:

spills

dusts/vapours

slip and fall

temperature

hazardous substances

moving equipment

manual handling hazards.

Problems

Respond to routine problems means 'apply known solutions to a limited range of predictable problems'. Typical process and product problems may include:

equipment malfunction

variations in process conditions

variations in materials or contamination of materials

wrong raw materials/additives

profiling rollers damage

routine product faults.