NTISthis.com

Evidence Guide: PMBPROD300B - Produce products

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

PMBPROD300B - Produce products

What evidence can you provide to prove your understanding of each of the following citeria?

Plan own work requirements.

  1. Identify the most appropriate equipment to be used for production and upstream and downstream operations from production plan or request.
  2. Identify and check materials required, including additives and regrind and their amounts or percentages.
  3. Implement measures to control identified hazards in line with procedures and duty of care.
  4. Identify requirements for materials, quality, production and equipment checks.
Identify the most appropriate equipment to be used for production and upstream and downstream operations from production plan or request.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and check materials required, including additives and regrind and their amounts or percentages.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Implement measures to control identified hazards in line with procedures and duty of care.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify requirements for materials, quality, production and equipment checks.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Start up equipment/ process to procedures.

  1. Identify process settings required for product.
  2. Set process to required settings.
  3. Check materials are correct.
  4. Take appropriate action for non-conforming materials.
  5. Set up date, batch and materials markings to specifications, as required.
  6. Complete pre-start checks .
  7. Start up moulding process.
Identify process settings required for product.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set process to required settings.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check materials are correct.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Take appropriate action for non-conforming materials.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up date, batch and materials markings to specifications, as required.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete pre-start checks .

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Start up moulding process.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate and make adjustments to the equipment/process to procedures.

  1. Operate equipment/process, noting key variables.
  2. Monitor controls/displays/terminals for production and process data.
  3. Take samples as required and identify product out of specification.
  4. Monitor product/process quality.
  5. Make adjustments to remedy faults and nonconformity as required.
  6. Establish a stable process.
  7. Adjust process to minimise scrap and trim.
  8. Clean, adjust and lubricate equipment as required.
Operate equipment/process, noting key variables.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor controls/displays/terminals for production and process data.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Take samples as required and identify product out of specification.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor product/process quality.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Make adjustments to remedy faults and nonconformity as required.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Establish a stable process.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjust process to minimise scrap and trim.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean, adjust and lubricate equipment as required.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Shut down machine to procedures.

  1. Determine type of shut down.
  2. Select appropriate purging method.
  3. Purge efficiently and adequately as required.
  4. Leave machine in appropriate condition and with appropriate locks, tags or notices.
  5. Complete relevant documentation.
  6. Ensure area is clean and clear after the shutdown, in readiness for the next start up.
Determine type of shut down.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select appropriate purging method.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Purge efficiently and adequately as required.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Leave machine in appropriate condition and with appropriate locks, tags or notices.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete relevant documentation.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ensure area is clean and clear after the shutdown, in readiness for the next start up.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Anticipate and solve problems

  1. Recognise a problem or a potential problem.
  2. Determine problems needing priority action.
  3. Refer problems outside area of responsibility to appropriate person, with possible causes.
  4. Seek information and assistance as required to solve problems.
  5. Solve problems within area of responsibility.
  6. Follow through items initiated until final resolution has occurred.
Recognise a problem or a potential problem.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine problems needing priority action.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Refer problems outside area of responsibility to appropriate person, with possible causes.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Seek information and assistance as required to solve problems.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Solve problems within area of responsibility.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Follow through items initiated until final resolution has occurred.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Overview of assessment

A holistic approach should be taken to the assessment.

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability to:

identify critical materials properties and process characteristics in relation to the process requirements and the end product

plan own work process within workplace procedures and explain the reasons for the steps in the process

take appropriate action to observe equipment, materials and products for out of specification results, make adjustments and identify problems to be reported.

Consistent performance should be demonstrated. For example, look to see that:

production quality and output standards are met consistently

problems are anticipated from process observations

problems are efficiently resolved

the process runs consistently and smoothly.

Assessment method and context

Assessment will occur on an industrial machine(s) equipment and will be undertaken in a work-like environment.

Competence in this unit may be assessed:

on a processing plant, allowing for operation under all normal and a range of abnormal conditions

in a situation allowing for the generation of evidence of the ability to respond to problems

by using a suitable simulation and/or a range of case studies/scenarios

through a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Specific resources for assessment

This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.

Required Skills and Knowledge

This describes the essential skills and knowledge and their level required for this unit.

Application of knowledge of the materials, equipment and process sufficient to recognise material and equipment conditions which may lead to out of specification production.

Knowledge of organization procedures and relevant regulatory requirements along with the ability to implement them within appropriate time constraints and work standards.

Competence includes the ability for the practical completion of the job to apply and/or explain:

products, materials and material characteristics

behaviour of materials in relation to key process variables

quality requirements at each production stage

function and operating principles of equipment

machine components and ancillary equipment

impact of key process variables on product quality and production output

nature of mechanical, hydraulic, pneumatic, electrical and electronic principles which effect machine operation and product development

the importance of machine set up and start up procedure up for effective processing of materials

safety procedures and the use of PPE in relation to handling materials, equipment operation and clean up

the hierarchy of control including engineering controls

impact of variations in raw materials and equipment operation in relation to final product

changes to materials at various stages of production

waste management and importance of non-conforming materials

polymer properties and their interactions with process conditions

relationships between polymer properties and process conditions

changes to polymer properties to better suit process requirements

product problems related to polymer properties

product problems related to process conditions

adjustments to process conditions to meet polymer and product requirements.

Competency also includes the ability to:

plan own work, including predicting consequences and identifying improvements

interpret from production requests the correct selection and use of equipment, materials, processes and procedures

maintain output and product quality using appropriate instruments, controls, test information and readings

apply relevant procedures relating to safe working practices prescribed for the equipment

follow local OHS legislation and/or regulations.

Language, literacy and numeracy requirements

This unit requires the ability to read and interpret typical product specifications, job sheets and material labels as provided to operators.

Writing is required to the level of completing workplace forms and production reports.

Basic numeracy is required, eg to determine how many 2 kg, 3 kg and 5 kg bags are needed to make up a requirement for 50 kg.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.

Context

This competency applies to advanced operators demonstrating some relevant theoretical knowledge and using a range of well developed skills requiring some discretion and judgement.

Procedures

All operations are performed in accordance with procedures.

Procedures means all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.

Tools and equipment

This competency includes use of equipment and tools such as:

process equipment and its major components

hand tools used in the process

material loading equipment used for loading of raw materials

relevant personal protective equipment.

Hazards

Typical hazards include:

spills

dusts/vapours

slips, trips and falls

temperature

hazardous materials

manual handling hazards

equipment operations.

Problems

'Anticipate and solve problems' means resolve a wide range of routine and non-routine problems, using product and process knowledge to develop solutions to problems which do not have a known solution/a solution recorded in the procedures.

Typical process and product problems may include:

routine and non-routine product faults

machine malfunction

mould/tooling/ die problems

variations in materials and/or contamination of materials

processing problems.

Variables

Key variables to be monitored include:

temperatures

speed

pressures

colour

cycle time/process timing

output rate

product weight

product integrity and general conformance to specification/sample.