The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan own work requirements.
|
|
Identify equipment and processes used for production process and upstream and downstream operations from production plan or request. Completed |
Evidence:
|
Identify component, electrode and bath materials. Completed |
Evidence:
|
Recognise hazards and follow appropriate hazard control/minimisation methods. Completed |
Evidence:
|
Identify and check emergency stops, guards and controls Identify requirements for materials, quality, production and equipment checks. Completed |
Evidence:
|
Identify materials, waste management and housekeeping needs. Completed |
Evidence:
|
Check electroplating process set-up.
|
|
Determine equipment requirements. Completed |
Evidence:
|
Set process to specifications as required. Completed |
Evidence:
|
Set up and adjust bath conditions. Completed |
Evidence:
|
Check materials are correct. Completed |
Evidence:
|
Check racking, baskets or supports are as required. Completed |
Evidence:
|
Discard, or make adjustments to the process for, non-conforming materials. Completed |
Evidence:
|
Set up date, batch and materials markings to specifications, as required. Completed |
Evidence:
|
Complete other pre-start checks in accordance with procedures. Completed |
Evidence:
|
Operate electroplating equipment.
|
|
Start equipment safely and correctly to procedures. Completed |
Evidence:
|
Load components to be plated onto racks, supports or fixtures. Completed |
Evidence:
|
Compare measures of plating deposition and quality against specifications. Completed |
Evidence:
|
Monitor controls including operating temperatures, voltage/current relationships, plating time. Completed |
Evidence:
|
Record production data as required. Completed |
Evidence:
|
Shut down equipment safely and correctly to procedures. Completed |
Evidence:
|
Anticipate and solve problems.
|
|
Recognise a problem or a potential problem. Completed |
Evidence:
|
Determine problems needing priority action. Completed |
Evidence:
|
Refer problems outside area of responsibility to appropriate person, with possible causes. Completed |
Evidence:
|
Seek information and assistance as required to solve problems. Completed |
Evidence:
|
Solve problems within area of responsibility. Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred. Completed |
Evidence:
|