The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan own work requirements
|
|
Identify equipment and processes used for production process and upstream and downstream operations from production plan or request Completed |
Evidence:
|
Identify and check materials required Completed |
Evidence:
|
Implement measures to control identified hazards in line with procedures and duty of care Completed |
Evidence:
|
Identify requirements for materials, quality, production and equipment checks Completed |
Evidence:
|
Check compression moulding process set-up to procedures
|
|
Identify process settings required for product Completed |
Evidence:
|
Set process to required settings Completed |
Evidence:
|
Check materials are correct Completed |
Evidence:
|
Take appropriate action for non-conforming materials Completed |
Evidence:
|
Set up date, batch and materials markings to specifications, as required Completed |
Evidence:
|
Complete pre-start checks Completed |
Evidence:
|
Start up press/compression moulding process Completed |
Evidence:
|
Operate and make adjustments as required to the compression moulding process
|
|
Operate compression moulding process, noting key variables Completed |
Evidence:
|
Monitor controls/displays/terminals for production and process data Completed |
Evidence:
|
Take samples as required and identify product out of specification Completed |
Evidence:
|
Monitor product/process quality Completed |
Evidence:
|
Make adjustments to remedy faults and non-conformity as required Completed |
Evidence:
|
Establish a stable compression moulding process Completed |
Evidence:
|
Adjust process to minimise scrap and trim Completed |
Evidence:
|
Clean, adjust and lubricate equipment as required Completed |
Evidence:
|
Shut down process as required Completed |
Evidence:
|
Leave machine in appropriate condition and ready for the next start-up Completed |
Evidence:
|
Anticipate and solve problems
|
|
Recognise a problem or a potential problem Completed |
Evidence:
|
Determine problems needing priority action Completed |
Evidence:
|
Refer problems outside area of responsibility to appropriate person, with possible causes Completed |
Evidence:
|
Seek information and assistance as required to solve problems Completed |
Evidence:
|
Solve problems within area of responsibility Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred Completed |
Evidence:
|