The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan process stages for printing and decorating.
|
|
Plan the stages in the printing and decorating process and ensure these comply with the quality requirements for production. Completed |
Evidence:
|
Identify and allow for changes in materials at each stage of the printing and decorating process. Completed |
Evidence:
|
Plan the availability of the equipment and components for each production stage. Completed |
Evidence:
|
Anticipate the impact of the process on product characteristics and product quality and usability Completed |
Evidence:
|
Plan work requirements based on procedures. Completed |
Evidence:
|
Identify work requirements for printing and decorating operations.
|
|
Prepare materials, including base raw materials and additives. Completed |
Evidence:
|
Identify and address hazards connected with both production materials and process. Completed |
Evidence:
|
Check materials inputs and outputs, dyes and print chemical colours, ancillary supplies and equipment are within specifications. Completed |
Evidence:
|
Check product quality requirements for the relevant process stage(s). Completed |
Evidence:
|
Identify and check equipment emergency stops, gauges, guards and controls. Completed |
Evidence:
|
Plan the task sequences, including times and locations for product quality checks, equipment operation and required production outputs. Completed |
Evidence:
|
Provide for ongoing materials input, waste management and work area housekeeping requirements. Completed |
Evidence:
|
Arrange any required supplementary equipment for product quality testing or routine equipment maintenance and/or adjustments. Completed |
Evidence:
|
Set up and check printing and decorating equipment.
|
|
Comply with equipment information, required quality specifications and set-up procedures. Completed |
Evidence:
|
Set up equipment in accordance with required specifications and procedures. Completed |
Evidence:
|
Check printing and decorating equipment settings and adjustments and conformity to procedures. Completed |
Evidence:
|
Check materials are correct. Completed |
Evidence:
|
Check that surface preparation operations provide for an even and consistent surface for printing. Completed |
Evidence:
|
Discard non-conforming materials or make adjustments to processing operations in accordance with workplace procedures. Completed |
Evidence:
|
Monitor printing and decorating operation
|
|
Start up, operate and shut down equipment as required by procedures. Completed |
Evidence:
|
Monitor printing and decorating operations. Completed |
Evidence:
|
Make adjustments to remedy faults and non-conformity to production standards where applicable. Completed |
Evidence:
|
Collect material which is able to be reprocessed and reused, and dispose of waste and scrap in accordance with procedures. Completed |
Evidence:
|
Clean up equipment, lubricate, and adjust in accordance with workplace procedures. Completed |
Evidence:
|