The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan own work requirements
|
|
Identify materials required, including additives Completed |
Evidence:
|
Recognise hazards and follow appropriate hazard control/minimisation methods Completed |
Evidence:
|
Identify and check emergency stops, guards and controls Completed |
Evidence:
|
Identify requirements for materials, quality, production and equipment checks Completed |
Evidence:
|
Identify materials, waste management and housekeeping needs Completed |
Evidence:
|
Plan vacuum forming operations within scope of authority Completed |
Evidence:
|
Check process set-up
|
|
Determine equipment requirements Completed |
Evidence:
|
Check vacuum forming settings and adjustments for conformity to documented procedures Completed |
Evidence:
|
Check materials for conformity Completed |
Evidence:
|
Set process to specifications as required Completed |
Evidence:
|
Discard non-conforming materials or adjust processing operations in accordance with procedures/workplace instructions Completed |
Evidence:
|
Set up (where applicable) date and/or batch markings, and materials identification for the appropriate information Completed |
Evidence:
|
Undertake other pre-start checks in accordance with procedures Completed |
Evidence:
|
Operate and make adjustments to the process as required
|
|
Start machine safely and correctly in accordance with procedures/work instructions Completed |
Evidence:
|
Monitor sheet feed vacuum forming operations in accordance with procedures/work instructions, noting key variables Completed |
Evidence:
|
Monitor controls/displays/terminals for production/process data Completed |
Evidence:
|
Monitor product/process quality in accordance with procedures Completed |
Evidence:
|
Make adjustments to remedy faults and non-conformity to standard as required Completed |
Evidence:
|
Maintain continuity of process Completed |
Evidence:
|
Collect and reprocess/discard scrap/trim and other materials in accordance with procedures Completed |
Evidence:
|
Clean, adjust and lubricate equipment as required Completed |
Evidence:
|
Pause equipment or stop equipment in an emergency, following workplace and emergency procedures Completed |
Evidence:
|
Anticipate and solve problems
|
|
Recognise a problem or a potential problem Completed |
Evidence:
|
Determine problems needing priority action Completed |
Evidence:
|
Refer problems outside area of responsibility to appropriate person, with possible causes Completed |
Evidence:
|
Seek information and assistance as required to solve problems Completed |
Evidence:
|
Solve problems within area of responsibility Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred Completed |
Evidence:
|