The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan own work requirements
|
|
Identify equipment and processes used for production process and upstream and downstream operations from production plan or request Completed |
Evidence:
|
Identify and check materials required, including additives Completed |
Evidence:
|
Implement measures to control identified hazards in line with procedures and duty of care Completed |
Evidence:
|
Identify and check emergency stops, guards and controls Completed |
Evidence:
|
Identify requirements for materials, quality, production and equipment checks Completed |
Evidence:
|
Identify materials, waste management and housekeeping needs Completed |
Evidence:
|
Start up mill
|
|
Identify process settings required for product Completed |
Evidence:
|
Set process to required settings Completed |
Evidence:
|
Check materials are correct Completed |
Evidence:
|
Take appropriate action for non-conforming materials Completed |
Evidence:
|
Set up date, batch and materials markings to specifications, as required Completed |
Evidence:
|
Complete pre-start checks Completed |
Evidence:
|
Start up mill Completed |
Evidence:
|
Operate and make minor adjustments to the process to procedures
|
|
Operate process equipment, noting key variables Completed |
Evidence:
|
Monitor controls/displays/terminals for production/process data Completed |
Evidence:
|
Take samples as required and identify product out of specification Completed |
Evidence:
|
Monitor product/process quality Completed |
Evidence:
|
Make adjustments to remedy faults and non-conformity required Completed |
Evidence:
|
Establish a stable process Completed |
Evidence:
|
Adjust process to minimise scrap Completed |
Evidence:
|
Shut down mill as required Completed |
Evidence:
|
Clean, adjust and lubricate equipment as required Completed |
Evidence:
|
Anticipate and solve problems
|
|
Recognise problems or potential problems Completed |
Evidence:
|
Determine problems needing priority action Completed |
Evidence:
|
Refer problems outside area of responsibility to appropriate person, with possible causes Completed |
Evidence:
|
Seek information and assistance as required to solve problems Completed |
Evidence:
|
Solve problems within area of responsibility Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred Completed |
Evidence:
|