The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan own work requirements.
|
|
Identify equipment and processes used for production process and upstream and downstream operations from production plan or request. Completed |
Evidence:
|
Identify materials required including additives. Completed |
Evidence:
|
Recognise hazards and take appropriate action. Completed |
Evidence:
|
Identify and check emergency stops, guards and controls. Completed |
Evidence:
|
Identify requirements for materials, quality, production and equipment checks. Completed |
Evidence:
|
Identify materials, waste management and housekeeping needs. Completed |
Evidence:
|
Check optical fibre drawing equipment set-up.
|
|
Determine equipment requirements. Completed |
Evidence:
|
Set process to specifications as required. Completed |
Evidence:
|
Check materials are correct. Completed |
Evidence:
|
Select appropriate dies (number and sizes) and arrange in correct production sequence. Completed |
Evidence:
|
Coat drawing rollers with alcohol to procedures. Completed |
Evidence:
|
Check speed, time, tension and wind-off speed to requirements. Completed |
Evidence:
|
Check optical fibre winding equipment settings and adjustments, including tensions and spool loading, to specifications. Completed |
Evidence:
|
Discard, or make adjustments to the process for, non-conforming materials. Completed |
Evidence:
|
Set up date, batch and materials markings to specifications, as required. Completed |
Evidence:
|
Complete other pre-start checks to procedures. Completed |
Evidence:
|
Operate and make adjustments to optical fibre drawing machine to procedures.
|
|
Check and load materials using correct manual handling methods. Completed |
Evidence:
|
Start up equipment and make adjustments to reach required settings. Completed |
Evidence:
|
Monitor controls/displays/terminals for production/process data. Completed |
Evidence:
|
Monitor product/process quality. Completed |
Evidence:
|
Maintain continuity of process. Completed |
Evidence:
|
Make adjustments to remedy faults and nonconformity to standard as required. Completed |
Evidence:
|
Collect and reprocess/discard scrap/trim and other materials. Completed |
Evidence:
|
Complete required workplace documentation/records. Completed |
Evidence:
|
Clean, adjust and lubricate equipment as required. Completed |
Evidence:
|
Pause or stop equipment in an emergency, as required. Completed |
Evidence:
|
Shut down equipment to procedures.
|
|
Shut down equipment as required. Completed |
Evidence:
|
Complete equipment cleanup, adjustments and waste management. Completed |
Evidence:
|
Place suitable guards, locks and notices to prevent inadvertent start-up. Completed |
Evidence:
|
Anticipate and solve problems.
|
|
Recognise a problem or a potential problem. Completed |
Evidence:
|
Determine problems needing priority action. Completed |
Evidence:
|
Refer problems outside area of responsibility to appropriate person, with possible causes. Completed |
Evidence:
|
Seek information and assistance as required to solve problems. Completed |
Evidence:
|
Solve problems within area of responsibility. Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred. Completed |
Evidence:
|