NTISthis.com

Evidence Guide: PMBPROD380 - Produce composites using chopper gun/depositor

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

PMBPROD380 - Produce composites using chopper gun/depositor

What evidence can you provide to prove your understanding of each of the following citeria?

Plan own work requirements

  1. Identify equipment and processes to be used for production process and upstream and downstream operations from production plan or request
  2. Identify and check materials required, including additives
  3. Implement measures to control identified hazards in line with procedures and duty of care
  4. Identify and check emergency stops, guards and controls
  5. Identify requirements for materials, quality, production and equipment checks
  6. Identify materials, waste management and housekeeping needs
Identify equipment and processes to be used for production process and upstream and downstream operations from production plan or request

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and check materials required, including additives

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Implement measures to control identified hazards in line with procedures and duty of care

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and check emergency stops, guards and controls

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify requirements for materials, quality, production and equipment checks

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify materials, waste management and housekeeping needs

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up equipment, mould and materials to procedures

  1. Determine equipment requirements
  2. Adjust controls as required for factors, such as ambient conditions, temperature and materials
  3. Check equipment, raw material and mould all match job requirements
  4. Check materials, resins, fibres, release agents are correct
  5. Take appropriate action for non-conforming materials
  6. Set up date, batch and materials markings to specifications, as required
  7. Complete pre-start checks
Determine equipment requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjust controls as required for factors, such as ambient conditions, temperature and materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check equipment, raw material and mould all match job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check materials, resins, fibres, release agents are correct

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Take appropriate action for non-conforming materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up date, batch and materials markings to specifications, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete pre-start checks

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hand operate chopper gun/depositor

  1. Use chopper gun/depositor to apply materials to the mould to procedures
  2. Monitor product quality, thickness, colour and integrity
  3. Make adjustments to remedy faults and non-conformances as required
  4. Collect and segregate scrap, trim and other materials as required
  5. Shut off machine safely and correctly as required following procedures
Use chopper gun/depositor to apply materials to the mould to procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor product quality, thickness, colour and integrity

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Make adjustments to remedy faults and non-conformances as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Collect and segregate scrap, trim and other materials as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Shut off machine safely and correctly as required following procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Anticipate and solve problems

  1. Recognise a problem or a potential problem
  2. Determine problems needing priority action
  3. Refer problems outside area of responsibility to appropriate person, with possible causes
  4. Solve problems within area of responsibility
  5. Seek information and assistance as required to solve problems
  6. Follow through items initiated until final resolution has occurred
Recognise a problem or a potential problem

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine problems needing priority action

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Refer problems outside area of responsibility to appropriate person, with possible causes

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Solve problems within area of responsibility

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Seek information and assistance as required to solve problems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Follow through items initiated until final resolution has occurred

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan own work requirements

1.1

Identify equipment and processes to be used for production process and upstream and downstream operations from production plan or request

1.2

Identify and check materials required, including additives

1.3

Implement measures to control identified hazards in line with procedures and duty of care

1.4

Identify and check emergency stops, guards and controls

1.5

Identify requirements for materials, quality, production and equipment checks

1.6

Identify materials, waste management and housekeeping needs

2

Set up equipment, mould and materials to procedures

2.1

Determine equipment requirements

2.2

Adjust controls as required for factors, such as ambient conditions, temperature and materials

2.3

Check equipment, raw material and mould all match job requirements

2.4

Check materials, resins, fibres, release agents are correct

2.5

Take appropriate action for non-conforming materials

2.6

Set up date, batch and materials markings to specifications, as required

2.7

Complete pre-start checks

3

Hand operate chopper gun/depositor

3.1

Use chopper gun/depositor to apply materials to the mould to procedures

3.2

Monitor product quality, thickness, colour and integrity

3.3

Make adjustments to remedy faults and non-conformances as required

3.4

Collect and segregate scrap, trim and other materials as required

3.5

Shut off machine safely and correctly as required following procedures

4

Anticipate and solve problems

4.1

Recognise a problem or a potential problem

4.2

Determine problems needing priority action

4.3

Refer problems outside area of responsibility to appropriate person, with possible causes

4.4

Solve problems within area of responsibility

4.5

Seek information and assistance as required to solve problems

4.6

Follow through items initiated until final resolution has occurred

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan own work requirements

1.1

Identify equipment and processes to be used for production process and upstream and downstream operations from production plan or request

1.2

Identify and check materials required, including additives

1.3

Implement measures to control identified hazards in line with procedures and duty of care

1.4

Identify and check emergency stops, guards and controls

1.5

Identify requirements for materials, quality, production and equipment checks

1.6

Identify materials, waste management and housekeeping needs

2

Set up equipment, mould and materials to procedures

2.1

Determine equipment requirements

2.2

Adjust controls as required for factors, such as ambient conditions, temperature and materials

2.3

Check equipment, raw material and mould all match job requirements

2.4

Check materials, resins, fibres, release agents are correct

2.5

Take appropriate action for non-conforming materials

2.6

Set up date, batch and materials markings to specifications, as required

2.7

Complete pre-start checks

3

Hand operate chopper gun/depositor

3.1

Use chopper gun/depositor to apply materials to the mould to procedures

3.2

Monitor product quality, thickness, colour and integrity

3.3

Make adjustments to remedy faults and non-conformances as required

3.4

Collect and segregate scrap, trim and other materials as required

3.5

Shut off machine safely and correctly as required following procedures

4

Anticipate and solve problems

4.1

Recognise a problem or a potential problem

4.2

Determine problems needing priority action

4.3

Refer problems outside area of responsibility to appropriate person, with possible causes

4.4

Solve problems within area of responsibility

4.5

Seek information and assistance as required to solve problems

4.6

Follow through items initiated until final resolution has occurred

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria and demonstrate the ability to:

read and interpret procedures, job specifications, instruments/control panels, material labels and safety data sheets (SDS)

set up chopper gun/depositor equipment and prepare materials to meet specifications

operate the equipment to apply materials to moulds

monitor key variables, including:

temperatures and humidity of environment

resin to fibre ratios

surface finish/appearance

product integrity and general conformance to specification

make adjustments to remedy faults and nonconformity

maintain output and product quality

safely shut off equipment in normal and abnormal circumstances

identify hazards and apply relevant hazard controls

apply safety procedures

apply housekeeping procedures

apply waste management procedures

recognise early warning signs of equipment/processes needing attention or with potential problems

distinguish between causes of problems, including:

operational problems

materials properties

process variables

procedural problems

recognise and prioritise problems requiring action

resolve non-routine problems

communicate effectively with team/work group and supervisors

complete workplace records

do basic arithmetical manipulations, including additions, subtractions, divisions, fractions and percentages.

Must provide evidence that demonstrates knowledge relevant to their job sufficient to operate independently and to solve routine and non-routine problems, including knowledge of:

function and operating principles of chopper gun/depositor equipment

chopper gun/depositor spraying process and stages of production

properties of the materials required to form a composite structure of the required strength and surface finish, including the importance of gel coat properties and bonding

requirements for correct spraying of materials to the mould surface

pot life of the resins used

clean-out procedures

characteristics of materials and their behaviour in relation process conditions and stages of production

quality requirements at each production stage

common adjustments in process conditions and their impact on product quality and production output

impact of variations in raw materials and equipment operation in relation to final product

possible changes to materials properties to better suit specific process requirements

non-routine problems that may arise, the range of possible causes and appropriate actions

organisation procedures relevant to the work environment/job role

hierarchy of control

hazards that may arise in the job/work environment and:

their possible causes

potential consequences

appropriate risk controls.

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.

Regulatory framework

The latest version of all legislation, regulations, industry codes of practice and Australian/international standards, or the version specified by the local regulatory authority, must be used.

Applicable legislation, regulations, standards and codes of practice include:

health, safety and environmental (HSE) legislation, regulations and codes of practice relevant to the workplace, manual handling and hazardous materials

Australian/international standards relevant to the materials being used and products being made

any relevant licence and certification requirements.

All operations to which this unit applies are subject to stringent HSE requirements, which may be imposed through state/territory or federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between performance criteria and such requirements the legislative requirements take precedence.

Procedures

All operations must be performed in accordance with relevant procedures.

Procedures are written, verbal, visual, computer-based or in some other form, and include one or any combination of:

emergency procedures

work instructions

standard operating procedures (SOPs)

safe work method statements (SWMS)

formulas/recipes

batch sheets

temporary instructions

any similar instructions provided for the smooth running of the plant.

Tools and equipment

Tools and equipment include:

chopper gun/depositor

pots, pumps and controls

open moulds for composite products

ancillary equipment that is integral to the process.

Additional tools and equipment will be selected as required from:

hand tools used in the process

hoists/lifting equipment not requiring any special permits or licences

manual handling aids, such as hand carts and trolleys

relevant personal protective equipment (PPE).

Hazards

Hazards must be identified and controlled. Identifying hazards requires consideration of:

weight, shape, volume of materials to be handled

hazardous products and materials

rotational equipment or vibration

knives, sharp edges, protrusions or obstructions

slippery surfaces, spills or leaks

smoke, dust, vapours or other atmospheric hazards

high temperatures

electricity

gas

gases and liquids under pressure

structural hazards

equipment failures

machinery, equipment and product mass

other hazards that might arise.

Problems

Non-routine problems must be resolved by applying operational knowledge to develop new solutions, either individually or in collaboration with relevant experts, to:

determine problems needing action

determine possible fault causes

develop solutions to problems which do not have a known solution

follow through items initiated until final resolution has occurred

report problems outside area of responsibility to designated person.

Non-routine problems are unexpected problems or variations of previous problems and include one or more of:

variations in quality

emergency situations

intermittent faults.

Operational knowledge includes one or more of:

procedures

training

technical information, such as journals and engineering specifications

remembered experience

relevant knowledge obtained from appropriate people.