NTISthis.com

Evidence Guide: PMBWELD307B - Install high temperature plastic pressure pipelines

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

PMBWELD307B - Install high temperature plastic pressure pipelines

What evidence can you provide to prove your understanding of each of the following citeria?

Identify PB, PP, PEX, A1/PEX composites, PVDF and CPVC pipe materials as being suitable for specific pressure applications.

  1. Identify materials from national standards, job specifications and work site instructions.
  2. Determine material properties from national standards and material data sheets.
  3. Identify job needs from worksite instructions and specifications.
Identify materials from national standards, job specifications and work site instructions.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Determine material properties from national standards and material data sheets.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify job needs from worksite instructions and specifications.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify applications for alternative jointing technologies.

  1. Identify properties and limitations of mechanical jointing systems.
  2. Identify properties and limitations of thermal welding jointing systems.
  3. Perform trial jointing for all methods, identify non-conformance, report, and rectify.
  4. Assess quality against specification requirements.
Identify properties and limitations of mechanical jointing systems.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify properties and limitations of thermal welding jointing systems.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Perform trial jointing for all methods, identify non-conformance, report, and rectify.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assess quality against specification requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Determine methods for handling, storage, transport and installation of plastics pipeline components.

  1. Identify requirements for handling and transport of plastics materials.
  2. Determine requirements for long term storage.
  3. Determine requirements for installation including additional materials.
Identify requirements for handling and transport of plastics materials.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Determine requirements for long term storage.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Determine requirements for installation including additional materials.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify appropriate service connection and repair techniques.

  1. Determine service connection requirements.
  2. Identify alternative service connection methods to meet requirements.
  3. Perform service connection to meet requirements.
  4. Determine repair requirements.
  5. Identify alternative repair options.
  6. Perform repair installation to meet requirements.
Determine service connection requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify alternative service connection methods to meet requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Perform service connection to meet requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Determine repair requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify alternative repair options.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Perform repair installation to meet requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assess quality of completed installation by determining appropriate testing and commissioning procedures.

  1. Determine specific installation test requirements.
  2. Identify alternative test procedures to meet requirements.
Determine specific installation test requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify alternative test procedures to meet requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, the range statement and the assessment guidelines for this training package.

Overview of assessment

A holistic approach should be taken to the assessment.

Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that the installation meets the requirements of the standard.

Assessment method and context

Assessment will occur using PB, PEX, PP, Al/PEX composites, PVDF and CPVC or other relevant industrial plastic pipes, and installation equipment and will be undertaken in a work-like environment.

Competence in this unit may be assessed:

using an appropriate, industrial equipment, situations and polymers

in a situation allowing for the generation of evidence of the ability to recognise, anticipate and respond to problems

by using a suitable simulation and/or a range of case studies/scenarios

through a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.

Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.

Specific resources for assessment

This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.

Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.

Required Skills and Knowledge

This describes the essential skills and knowledge and their level required for this unit.

Knowledge and understanding of PB, PP, PEX A1/PEX, PVDF and CPVC materials and pipeline components as described in national standards to recognise suitability for specific installation, and to establish work instructions.

Knowledge of detailed work instructions necessary to perform pipeline installations, and the ability to implement requirements to attain required quality outcomes.

Knowledge as a basis for solving processing and material problems including:

identify individual types of materials and components being used

establish specific job needs

set up and maintain safe working environment

set up and maintain required storage, handling, and transport procedures

establish installation requirements

perform jointing and installation to meet required quality levels

identify and rectify fault causes arising from application and component variability

establish completion test requirements

establish and maintain quality record.

Language, literacy and numeracy requirements

Read material which is sequenced for instructions, explanations, information or opinions.

Write short and simple messages about routine tasks or activities, or complete forms.

Use hands-on real-life materials and pictures/diagrams based on personal experience and prior knowledge.

Use several pieces of related mathematical information.

Read, write and speak whole numbers and money sums, recognise and interpret simple fractions, decimals and percentages, use simple data, grid references.

Use simple grammatical forms and vocabulary to give instructions, give explanations, ask questions and express viewpoints.

Clarify intended meaning by asking for repetition when listening, and varying speed and changing tone or emphasis when speaking.

Use strategies such as providing verbal and non-verbal feedback in order to show interest or attitude.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Where reference is made to industry codes of practice and/or Australian/international standards, the latest version must be used.

Context

This competency unit includes the installation of relevant elements of polybutylene (PB), polypropylene (PP), cross linked polyethylene (PEX), A1/PEX composites, polyvinylidenefluoride (PVDF) and chlorinated PVC (CPVC) pressure pipeline components. The end applications include pipelines used for transmission of water based fluids at high temperatures.

It also includes the operation of alternative jointing procedures, service connections and repairs using all relevant ancillary equipment.

Procedures

All operations are performed in accordance with procedures.

Procedures include all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards. These may include:

AS/NZS 2642

AS/NZS 2492

AS/NZS 4176.

Tools and equipment

This competency includes use of equipment and tools such as:

mechanical and thermal jointing equipment and ancillary jigs and fixtures

measurement devices, including pressure gauges, times, temperature probes, calipers, and computer based monitors

calculators

service connection and repair equipment and products

relevant safety equipment

comprehensive work instructions.

Hazards

Typical hazards include:

hazardous cleaning fluids

pipe material handling

heavy stationary and moving machinery

cutting and heating components

hot fluids.

Problems

'Anticipate and solve problems' means resolve a wide range of routine and non-routine problems, using product and process knowledge to develop solutions to problems which do not have a known solution/a solution recorded in the procedures.

Typical process and product problems may include:

variable materials, and components and pipes as supplied

equipment malfunction or wear and tear

variable field site conditions

limitations in available data on specific job requirements.