The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Load agitator.
|
|
Check job requirements Completed |
Evidence:
|
Position agitator for loading Completed |
Evidence:
|
Load agitator with correct concrete batch Completed |
Evidence:
|
Check any special requirements and take action required. Completed |
Evidence:
|
Check that slump is to specification and take any action required Completed |
Evidence:
|
Deliver concrete.
|
|
Deliver concrete without delay Completed |
Evidence:
|
Position vehicle/agitator as required by safety needs and if practical customer requirements Completed |
Evidence:
|
Report breakdowns or lengthy delays en route to relevant person Completed |
Evidence:
|
Maintain product quality as per requirements and procedures. Completed |
Evidence:
|
Conform to site protocols
|
|
Check access to site with customer Completed |
Evidence:
|
Assess site conditions and enter in a manner suited to the conditions, load and site requirements Completed |
Evidence:
|
Mix concrete on site as per quality requirements Completed |
Evidence:
|
Discharge concrete as required by customer Completed |
Evidence:
|
Wash down chutes and agitator in the area designated by the customer Completed |
Evidence:
|
Complete all records Completed |
Evidence:
|
Rectify routine problems
|
|
Identify the range of faults that can occur during the operation Completed |
Evidence:
|
Determine and rectify fault causes in accordance with procedures/work instructions Completed |
Evidence:
|
Identify and rectify equipment failure causes in accordance with procedures Completed |
Evidence:
|
Make sure appropriate records and log books of equipment operations are maintained to meet procedures Completed |
Evidence:
|
Identify non-routine problems and take appropriate action. Completed |
Evidence:
|
Ensure required checklists are completed Completed |
Evidence:
|
Control hazards
|
|
Identify hazards from the job to be done Completed |
Evidence:
|
Identify other hazards in the work area Completed |
Evidence:
|
Assess the risks arising from those hazards Completed |
Evidence:
|
Implement measures to control those risks in line with procedures Completed |
Evidence:
|