The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Interpret and comply with legal and industry requirements relating to service operations.
|
|
Apply knowledge and understanding of legislative requirements, including relevant state and territory building codes, manufacturer documentation and Australian standards to work procedures and clarify where necessary with relevant persons. Completed |
Evidence:
|
Apply knowledge and understanding of ODS and SGG legislative and industry requirements to inspect and test gaseous fire suppression systems. Completed |
Evidence:
|
Apply knowledge and understanding of the operation of fire protection systems to determine system key functional requirements and operation within design limitations. Completed |
Evidence:
|
Identify potential and actualbreaches of legislative and industry requirements and take action according to organisational requirements, and ODS, SGG and OHS policies and procedures. Completed |
Evidence:
|
Identify requirements and components of the gaseous fire suppression system.
|
|
Identify gaseous fire suppression system application and method of operation. Completed |
Evidence:
|
Identify and locate system components of the gaseous fire suppression system according to function, manufacturer manuals, Australian standards and installer documentation. Completed |
Evidence:
|
Verify system layout is in accordance with installation drawings. Completed |
Evidence:
|
Identify isolation devices for gaseous fire suppression systems and interface controls to other systems. Completed |
Evidence:
|
Identify potential and actual breaches of the gaseous fire suppression equipment and system performance according to Australian standards, relevant state and territory building codes, and manufacturer documentation. Completed |
Evidence:
|
Prepare to inspect, test and maintain gaseous fire suppression systems.
|
|
Organise all necessary work permits prior to entering customer premises. Completed |
Evidence:
|
Advise relevant persons and occupants of protected areas and areas surrounding test site, of intended test and procedures required by Australian standards and manufacturer recommendations. Completed |
Evidence:
|
Assess system and surrounding work area for hazards. Completed |
Evidence:
|
Identify and assemble tools, equipment and testing devices for inspect, test and maintain procedures according to work procedures and organisational requirements. Completed |
Evidence:
|
Switch alarm signalling equipment (ASE) to test mode where back-to-basefacilities transmit a signal to monitoring centre during test tasks. Completed |
Evidence:
|
Physically isolate equipment and gaseous fire suppression function to ensure testing or maintenance procedures do not cause discharge of extinguishing agent. Completed |
Evidence:
|
Electrically isolate equipment and interface controls to other systems so no alarms are unduly generated. Completed |
Evidence:
|
Install and calibrate test equipment to verify operation of components and system. Completed |
Evidence:
|
Inspect installed gaseous fire suppression system.
|
|
Identify and locate system components of gaseous fire suppression system according to function and manufacturer manuals. Completed |
Evidence:
|
Complete mechanicalinspection tasks specified for maintenance scheduleperiods described in the current Australian standards, manufacturer specifications and procedures, service manual instructions and service bulletins. Completed |
Evidence:
|
Follow all safety procedures during inspection. Completed |
Evidence:
|
Complete documentation, record inspection results and report faulty equipment according to Australian standards, work procedures, technical specifications and customer requirements. Completed |
Evidence:
|
Test installed gaseous fire suppression system.
|
|
Complete mechanical test tasks specified for maintenanceschedule periods described in the current Australian standards, manufacturer specifications and procedures, service manual instructions and service bulletins. Completed |
Evidence:
|
Follow all safety procedures during testing. Completed |
Evidence:
|
Complete documentation, record test results and report faulty equipment according to Australian standards, work procedures, technical specifications and customer requirements. Completed |
Evidence:
|
Conduct preventive maintenance on installed gaseous fire suppression system.
|
|
Complete the mechanicalpreventive maintenance tasks specified for maintenance schedule period described in the current Australian standard, according to legislative requirements, manufacturer specifications and procedures, service manual instructions and service bulletins. Completed |
Evidence:
|
Repair or replace faulty equipment according to Australian standards, work procedures, technical specifications and customer requirements. Completed |
Evidence:
|
Organise transportation and refilling of gaseous agent containers by authorised refilling station. Completed |
Evidence:
|
Follow all safety procedures during preventive maintenance. Completed |
Evidence:
|
Complete documentation and record preventive maintenance results, repairs and replacements of faulty equipment according to Australian standards, work procedures, technical specifications and customer requirements. Completed |
Evidence:
|
Reinstate installed gaseous fire suppression system.
|
|
Reinstate installed gaseous fire suppression system to fully operational state. Completed |
Evidence:
|
Leave customer premises in a clean and tidy condition on completion of work. Completed |
Evidence:
|