NTISthis.com

Evidence Guide: PUADEFOH011B - Develop laser safety plans

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

PUADEFOH011B - Develop laser safety plans

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for the development of laser safety plans

  1. Laser sources are identified and confirmed in accordance with organisational policy and procedures
  2. Standards and legislation appropriate to lasers are identified and accessed
  3. Existing organisational records relevant to laser equipment are identified and accessed
  4. Equipment and resources required for the assessment of laser equipment are identified, acquired and prepared in accordance with organisational procedures
  5. Occupational health and safety (OH&S) requirements including those contained in organisation procedures, are applied throughout the operation
Laser sources are identified and confirmed in accordance with organisational policy and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Standards and legislation appropriate to lasers are identified and accessed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Existing organisational records relevant to laser equipment are identified and accessed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment and resources required for the assessment of laser equipment are identified, acquired and prepared in accordance with organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Occupational health and safety (OH&S) requirements including those contained in organisation procedures, are applied throughout the operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assess laser hazards

  1. Laser classifications are verified in accordance with legislative requirements, safety standards and organisational policy and procedures
  2. Maximum permissible exposures of continuous wave and repetitively pulsed lasers are evaluated in accordance with legislative requirements, safety standards and organisational policy and procedures
  3. Laser hazards are identified in accordance with legislative requirements, safety standards and organisational policy and procedures
  4. Laser hazard environments are assessed in accordance with legislative requirements, safety standards and organisational policy and procedures
Laser classifications are verified in accordance with legislative requirements, safety standards and organisational policy and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maximum permissible exposures of continuous wave and repetitively pulsed lasers are evaluated in accordance with legislative requirements, safety standards and organisational policy and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Laser hazards are identified in accordance with legislative requirements, safety standards and organisational policy and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Laser hazard environments are assessed in accordance with legislative requirements, safety standards and organisational policy and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Develop laser safety plans

  1. Appropriate consultation with stakeholders is conducted in accordance with organisational policy and procedures
  2. Technical standards, organisational environmental requirements and laser exposure levels are identified and interpreted
  3. Laser safety plans are developed in accordance with legislative requirements and organisational policy and procedures
  4. Laser safety plans are forwarded to the relevant authority in accordance with organisational policy and procedures
Appropriate consultation with stakeholders is conducted in accordance with organisational policy and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Technical standards, organisational environmental requirements and laser exposure levels are identified and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Laser safety plans are developed in accordance with legislative requirements and organisational policy and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Laser safety plans are forwarded to the relevant authority in accordance with organisational policy and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessment must confirm the ability to identify applicable hazards and to provide safe and practical policy, procedures and instructions that counter these hazards in the work environment for operators of lasers and others working in an environment where lasers may be encountered.

Consistency in performance

Competency should be demonstrated over a range of laser types. This may be in training or an operational setting.

Context of and specific resources for assessment

Context of assessment

Competency should be assessed in relation to policy and/or instructions/advice provided in accordance with all relevant legislation and workplace requirements.

Specific resources for assessment

Access to research material, manufacturers' equipment specifications and existing related policy and instructions.

Guidance information for assessment

Information that will assist or guide assessment will be written during Phase II of the Review of the PUA00 Public Safety Training Package.

Required Skills and Knowledge

This describes the essential skills and knowledge and their level, required for this unit.

Required Skills

apply complex mathematical processes

communicate effectively

conduct research

provide technical advice

write technical reports

Required Knowledge

characteristics of lasers including the types of lasers and the fundamentals of laser operation

laser environment

organisational policy and procedures relevant to laser operations

relevant Australian and international standards

report writing

Range Statement

The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.

Laser safety plans may include

Laser templates

Monitoring processes

Nominal ocular hazard area/s (NOHA)

Protocols and local controls

Recommendations for additional control measures

Reference to laser operating limitations such as power output, length of time/burst, number of repeat exposures

Reference to protective measures, such as governing the use of binoculars or observing the source

Referrals to other experts

Requirement for special optical components/filters, clothing or equipment

Organisational policy and procedures may include

Equipment manufacturers' specifications

Previous testing reports

Risk assessments

Standing Operating Procedures (SOPs)

Standards and legislation may include

Australian Regulation Protection and Nuclear Safety Authority (ARPANSA) requirements

Relevant Australian and international standards

State/territory/commonwealth legislation

Organisational records may include

Electronic records

Inventories

Journals

Registers

Equipment and resources may include

Gauges

Laser measuring instruments

Recording devices

Preparation of equipment and resources may include

Calibration of testing equipment

Testing equipment for safe operation (confidence testing)

Testing equipment for serviceability

Occupational health and safety requirements may include

Award provisions

State/territory/commonwealth and local government legislation and by-laws

Laser classifications may include

Confirmation of calculations to determine the classification of a laser in accordance with Australian and international laser safety standards (such as contained in AS/NZ 2211.1:1997)

Reference to guidance on the applicability of international laser safety standards based on guidance and advice issued by ARPANSA

Laser hazards may include

Extended source viewing

Point source and intra-beam viewing

Specular reflections

Use of magnifying optics

Laser hazard environments may include

Climatic and weather variations

Geographical and geological variations

Laboratories

Operation and training field environments including land, sea (above and below water level), air and space

Variations due to vegetation

Stakeholders may include

External agencies

Government/agency regulators/inspectors

Immediate supervisors

Internal agencies

OH&S representatives

Other interested parties, including members of the public

Relevant personnel in the chain of command

Unit managers