The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare
|
|
Access, interpret and apply compliance documentation relevant to the work activity Completed |
Evidence:
|
Obtain and confirm safety requirements from the site safety plan and organisational policies and procedures, and apply to the allotted task Completed |
Evidence:
|
Identify, obtain and implement signage requirements from the project traffic management plan Completed |
Evidence:
|
Determine material to be laid and handling procedures to be employed according to specifications Completed |
Evidence:
|
Select plant, tools and equipment to carry out tasks consistent with the requirements of the job, check for serviceability and rectify or report any faults Completed |
Evidence:
|
Identify environmental protection requirements from the project environmental management plan, and confirm and apply to the allotted task Completed |
Evidence:
|
Prepare mix materials
|
|
Confirm material availability for slurry seal operations Completed |
Evidence:
|
Ascertain and confirm mix specifications Completed |
Evidence:
|
Check paving unit to ensure correct calibration of metering devices to mix specification Completed |
Evidence:
|
Clean and test spreader box for correct operation Completed |
Evidence:
|
Prepare surface for slurry application
|
|
Protect surfaces in accordance with company or client instructions Completed |
Evidence:
|
Note surface defects and rectify or treat during sealing operation Completed |
Evidence:
|
Clean and clear work area of loose stones, oil or other contaminants Completed |
Evidence:
|
Set out work area ensuring a straight edge is maintained along kerbs, shoulders and through intersections Completed |
Evidence:
|
Apply slurry seal
|
|
Maintain consistency of mix as per specification or job instructions Completed |
Evidence:
|
Mix spread in accordance with specification or job instructions Completed |
Evidence:
|
Achieve surface finish in accordance with specification or job instruction Completed |
Evidence:
|
Ensure joints are neat with no overlapping or excess materials showing Completed |
Evidence:
|
Use hand spreading to cover small or difficult areas Completed |
Evidence:
|
Carry out operator maintenance
|
|
Conduct inspection and fault finding in accordance with manufacturer's specifications and/or organisational requirements Completed |
Evidence:
|
Carry out routine operational servicing and lubrication tasks Completed |
Evidence:
|
Carry out minor maintenance Completed |
Evidence:
|
Record performance of machine constantly to enable timely repair of equipment Completed |
Evidence:
|
Clean up
|
|
Clear work area and dispose of or recycle materials in accordance with project environmental management plan Completed |
Evidence:
|
Clean, check, maintain and store plant, tools and equipment Completed |
Evidence:
|