NTISthis.com

Evidence Guide: RIICCM204A - Place and fix reinforcement materials

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

RIICCM204A - Place and fix reinforcement materials

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare

  1. Access, interpret and apply compliance documentation relevant to the work activity
  2. Obtain and confirm safety requirements from the site safety plan and organisational policies and procedures, and apply to the allotted task
  3. Identify, obtain and implement signage/barricade requirements from the project traffic management plan
  4. Select plant, tools and equipment to carry out tasks consistent with the requirements of the job, check for serviceability and rectify or report any faults
  5. Check stock of reinforcement materials for correct type and quantity against reinforcement schedule and details in plans/specifications
  6. Identify environmental protection requirements from the project environmental management plan, and confirm and apply to the allotted
Access, interpret and apply compliance documentation relevant to the work activity

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain and confirm safety requirements from the site safety plan and organisational policies and procedures, and apply to the allotted task

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify, obtain and implement signage/barricade requirements from the project traffic management plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select plant, tools and equipment to carry out tasks consistent with the requirements of the job, check for serviceability and rectify or report any faults

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check stock of reinforcement materials for correct type and quantity against reinforcement schedule and details in plans/specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify environmental protection requirements from the project environmental management plan, and confirm and apply to the allotted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for reinforcement placement

  1. Check formwork for completion and conformity to receive reinforcement
  2. Cut and bend reinforcement bars to required set out and plans/specifications
  3. Tie bars to designed configuration
  4. Cut reinforcement sheets to required sizes
  5. Attach stiffening rods to panels as required to facilitate handling processes
  6. Locate bar chairs/spacers to requirements of reinforcement schedule and plans/specifications
Check formwork for completion and conformity to receive reinforcement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cut and bend reinforcement bars to required set out and plans/specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tie bars to designed configuration

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cut reinforcement sheets to required sizes

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Attach stiffening rods to panels as required to facilitate handling processes

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Locate bar chairs/spacers to requirements of reinforcement schedule and plans/specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Place and fix reinforcement

  1. Place fabric reinforcement sheets into position in accordance with engineer's drawings and specifications
  2. Locate and position reinforcement bars
  3. Locate and place reinforcement using bar chairs, ligatures and spacers
  4. Support and secure reinforcement material is supported and secured into position
  5. Secure cast-in items to reinforcement
  6. Cover and protect ends of protruding reinforcement material
Place fabric reinforcement sheets into position in accordance with engineer's drawings and specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Locate and position reinforcement bars

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Locate and place reinforcement using bar chairs, ligatures and spacers

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Support and secure reinforcement material is supported and secured into position

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Secure cast-in items to reinforcement

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cover and protect ends of protruding reinforcement material

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check reinforcement prior to concrete pour

  1. Check location and position of reinforcement and fixing ties to reinforcement for accuracy
  2. Check depth of coverage, clearance, spacing and overlap of reinforcement material in accordance with engineer's drawings/job specifications
Check location and position of reinforcement and fixing ties to reinforcement for accuracy

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check depth of coverage, clearance, spacing and overlap of reinforcement material in accordance with engineer's drawings/job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up

  1. Clear work area and dispose of or recycle materials in accordance with project environmental management plan
  2. Clean, check, maintain and store plant, tools and equipment
Clear work area and dispose of or recycle materials in accordance with project environmental management plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean, check, maintain and store plant, tools and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:

knowledge of the requirements, procedures and instructions for placing and fixing reinforcement materials

implementation of requirements, procedures and techniques for the safe, effective and efficient completion of the placing and fixing of reinforcement materials

working with others to undertake and complete the placing and fixing reinforcement materials in a way that meets all of the required outcomes

consistent timely completion of the placing and fixing of reinforcement materials that safely, effectively and efficiently meets the required outcomes

the placement and fixing of reinforcement materials to specification on a minimum of three different jobs and involving deformed bars, rods and mesh sheets

Context of and specific resources for assessment

This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.

Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.

The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.

Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.

Aboriginal people and other people from a non English speaking background may have second language issues.

Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.

Method of assessment

This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:

written and/or oral assessment of the candidate's required knowledge

observed, documented and/or first hand testimonial evidence of the candidate's:

implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes

consistent achievement of required outcomes

first hand testimonial evidence of the candidate's:

working with others to undertake and complete the placing and fixing of reinforcement materials

Guidance information for assessment

Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.

Required Skills and Knowledge

Required skills

Specific skills are required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes the ability to carry out the following, as required to place and fix reinforcement materials:

apply legislative, organisation and site requirements and procedures for placing and fixing reinforcement materials

organise work activities

select and use relevant tools and equipment safely

identify and report on hazards related to the worksite and work activity

communicate effectively to receive and clarify work instructions

read engineering drawings

Required knowledge

Specific knowledge is required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes knowledge of the following, as required to place and fix reinforcement materials:

steel reinforcement characteristics

concrete characteristics and properties

concreting principles

structural technology

formwork

equipment types, characteristics, technical capabilities and limitations

operational, maintenance and basic diagnostic procedures

site and equipment safety requirements

site isolation and traffic control responsibilities and authorities

materials safety data sheets and materials handling methods

project quality requirements

civil construction terminology

JSAs/safe work method statement

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Relevant compliance documentation may include:

legislative, organisational and site requirements and procedures

manufacturer's guidelines and specifications

Australian standards

Employment and workplace relations legislation

Equal Employment Opportunity and Disability Discrimination legislation

Safety requirements may include:

OHS requirements in accordance with state or territory legislation and regulations, organisational safety policies and procedures, and project safety plan including: protective clothing and equipment, use of tools and equipment, workplace environment and safety, handling of materials, use of fire fighting equipment, use of First Aid equipment, hazard control and hazardous materials and substances

safe operating procedures including recognising and preventing hazards associated with high voltage power lines, uneven/unstable terrain, trees, overhead service lines, bridges, surrounding buildings, obstructions, structures, facilities, dangerous materials, recently filled trenches, other machines, personnel, traffic control, working at heights, working in proximity to others, worksite visitors and the public

safe parking practices including ensuring access ways are clear, equipment/machinery is away from overhangs and refuelling sites, safe distance from excavations, and secured from unauthorised access or movement

recognising hazards and risks including uneven/unstable terrain, trees, fires, overhead and underground services, bridges, buildings, excavations, traffic, embankments, cuttings, structures and hazardous materials

emergency procedures related to equipment operation including emergency shutdown and stopping, extinguishing equipment fires, organisational First Aid requirements and evacuation

Site may include:

steelfixing involving reinforcing concrete for:

foundations

pits

slabs

columns

walls

stairs

plinths

kerbs

gutters

pathways

hard standings

Signage may include:

escort vehicle

highway traffic signs

site safety signage

temporary signage for the benefit of motorists and pedestrians

traffic conditions signage

Tools and equipment may include:

bolt cutters

wire nippers

tie wire reels

measuring tapes/rules

reinforcement benders

mesh guillotines

a range of general hand and power tools

MMAW machines

oxy acetylene set

cutting attachments

Reinforcement materials may include:

wire ties

ligatures

spacers/spreaders assemblies

deformed bars

plain rods

bar chairs

mesh sheets of plain bars

mesh sheets of deformed bars

scaffolding components

pipe sections

structural steel sections