The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare to lay reinforced concrete box culverts
|
|
Access, interpret and apply reinforced concrete box culverts laying documentation and ensure the work activity is compliant Completed |
Evidence:
|
Obtain, read, interpret, clarify and confirm work requirements Completed |
Evidence:
|
Identify and address potential risks, hazards and environmental issues, and implement control measures Completed |
Evidence:
|
Select and wear correct personal protective equipment appropriate for work activities Completed |
Evidence:
|
Identify, obtain, confirm and implement signage requirements Completed |
Evidence:
|
Select and check for faults all plant, tools and equipment to carry out tasks Completed |
Evidence:
|
Check box culverts (RCBC) units to ensure conformity to relevant drawing and job specifications Completed |
Evidence:
|
Confirm plant and/or crane requirements to assist in preparing ground and placing box culverts Completed |
Evidence:
|
Set out and excavation
|
|
Determine location and depths of excavation from job drawings Completed |
Evidence:
|
Set out and clearly mark excavation location Completed |
Evidence:
|
Advise plant operator of excavation requirements Completed |
Evidence:
|
Check excavation depths and grades to conform with plans and specifications Completed |
Evidence:
|
Compact and prepare foundations base for testing Completed |
Evidence:
|
Construct concrete base
|
|
Set out and construct formwork to required dimensions Completed |
Evidence:
|
Place steel reinforcement to specifications Completed |
Evidence:
|
Form recesses in slab as specified Completed |
Evidence:
|
Connect and tighten hold down anchors to specified requirements Completed |
Evidence:
|
Place, compact, finish and cure concrete to specified requirements Completed |
Evidence:
|
Lay culvert units
|
|
Place continuous mortar bed to support legs Completed |
Evidence:
|
Lower and position RCBC units to line and level on supporting slab Completed |
Evidence:
|
Connect hold down anchors to RCBC units Completed |
Evidence:
|
Finish joints between RCBC units to specification Completed |
Evidence:
|
Infill space between legs of multiple culverts to specification Completed |
Evidence:
|
Install spanning slabs where specified for multiple culverts Completed |
Evidence:
|
Cut off and treat lifting lugs Completed |
Evidence:
|
Finish inlet and outlet of culvert Completed |
Evidence:
|
Advise plant operator of compaction and backfill requirements and backfill culvert to required finish level Completed |
Evidence:
|
Clean up
|
|
Clear work area and dispose of or recycle materials Completed |
Evidence:
|
Clean, check, maintain and store tools and equipment Completed |
Evidence:
|
Plan and prepare to lay reinforced concrete box culverts
|
|
Access, interpret and apply reinforced concrete box culverts laying documentation and ensure the work activity is compliant Completed |
Evidence:
|
Obtain, read, interpret, clarify and confirm work requirements Completed |
Evidence:
|
Identify and address potential risks, hazards and environmental issues, and implement control measures Completed |
Evidence:
|
Select and wear correct personal protective equipment appropriate for work activities Completed |
Evidence:
|
Identify, obtain, confirm and implement signage requirements Completed |
Evidence:
|
Select and check for faults all plant, tools and equipment to carry out tasks Completed |
Evidence:
|
Check box culverts (RCBC) units to ensure conformity to relevant drawing and job specifications Completed |
Evidence:
|
Confirm plant and/or crane requirements to assist in preparing ground and placing box culverts Completed |
Evidence:
|
Set out and excavation
|
|
Determine location and depths of excavation from job drawings Completed |
Evidence:
|
Set out and clearly mark excavation location Completed |
Evidence:
|
Advise plant operator of excavation requirements Completed |
Evidence:
|
Check excavation depths and grades to conform with plans and specifications Completed |
Evidence:
|
Compact and prepare foundations base for testing Completed |
Evidence:
|
Construct concrete base
|
|
Set out and construct formwork to required dimensions Completed |
Evidence:
|
Place steel reinforcement to specifications Completed |
Evidence:
|
Form recesses in slab as specified Completed |
Evidence:
|
Connect and tighten hold down anchors to specified requirements Completed |
Evidence:
|
Place, compact, finish and cure concrete to specified requirements Completed |
Evidence:
|
Lay culvert units
|
|
Place continuous mortar bed to support legs Completed |
Evidence:
|
Lower and position RCBC units to line and level on supporting slab Completed |
Evidence:
|
Connect hold down anchors to RCBC units Completed |
Evidence:
|
Finish joints between RCBC units to specification Completed |
Evidence:
|
Infill space between legs of multiple culverts to specification Completed |
Evidence:
|
Install spanning slabs where specified for multiple culverts Completed |
Evidence:
|
Cut off and treat lifting lugs Completed |
Evidence:
|
Finish inlet and outlet of culvert Completed |
Evidence:
|
Advise plant operator of compaction and backfill requirements and backfill culvert to required finish level Completed |
Evidence:
|
Clear work area and dispose of or recycle materials Completed |
Evidence:
|
Clean, check, maintain and store tools and equipment Completed |
Evidence:
|