The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare
|
|
Access, interpret and apply stabiliser operations documentation and ensure the work activity is compliant Completed |
Evidence:
|
Obtain, read, interpret, clarify and confirm work requirements Completed |
Evidence:
|
Identify and address potential risks, hazards and environmental issues, and implement control measures Completed |
Evidence:
|
Select and wear correct personal protective equipment appropriate for work activities Completed |
Evidence:
|
Identify, obtain, confirm and implement signage requirements Completed |
Evidence:
|
Determine material to be laid and handling procedures to be employed Completed |
Evidence:
|
Select and check for faults all plant, tools and equipment to carry out tasks Completed |
Evidence:
|
Conduct stabiliser pre-operational checks
|
|
Carry out pre-start, start-up, park and shutdown procedures Completed |
Evidence:
|
Check stabiliser controls and functions for serviceability, focusing on brakes, implements or other attachments and manoeuvrability Completed |
Evidence:
|
Rectify or report any faults identified Completed |
Evidence:
|
Operate stabiliser
|
|
Identify site hazards associated with stabiliser operations and use safe operating techniques to minimise risk Completed |
Evidence:
|
Identify and apply operating techniques for stabiliser to achieve optimum output in accordance with manufacturers’ design specifications while achieving specified tolerances Completed |
Evidence:
|
Ensure correct operation of stabiliser Completed |
Evidence:
|
Operate stabiliser to produce results, including mixing materials, using additives and line and length Completed |
Evidence:
|
Monitor movements and hazards and identify and communicate changes to the work environment during the work process Completed |
Evidence:
|
Relocate stabiliser
|
|
Move stabiliser safely between worksites in accordance with relevant codes and traffic management requirements Completed |
Evidence:
|
Prepare stabiliser for relocation Completed |
Evidence:
|
Carry out operator maintenance
|
|
Conduct inspection and fault finding in accordance with manufacturers’ specifications and/or organisational requirements Completed |
Evidence:
|
Carry out routine operational servicing and lubrication tasks Completed |
Evidence:
|
Carry out minor maintenance Completed |
Evidence:
|
Record in writing performance of machine constantly to enable timely repair of equipment Completed |
Evidence:
|
Clean up
|
|
Clear work area and recycle or dispose of materials Completed |
Evidence:
|
Clean, check, maintain and store plant, tools and equipment Completed |
Evidence:
|
Plan and prepare
|
|
Access, interpret and apply stabiliser operations documentation and ensure the work activity is compliant Completed |
Evidence:
|
Obtain, read, interpret, clarify and confirm work requirements Completed |
Evidence:
|
Identify and address potential risks, hazards and environmental issues, and implement control measures Completed |
Evidence:
|
Select and wear correct personal protective equipment appropriate for work activities Completed |
Evidence:
|
Identify, obtain, confirm and implement signage requirements Completed |
Evidence:
|
Determine material to be laid and handling procedures to be employed Completed |
Evidence:
|
Select and check for faults all plant, tools and equipment to carry out tasks Completed |
Evidence:
|
Conduct stabiliser pre-operational checks
|
|
Carry out pre-start, start-up, park and shutdown procedures Completed |
Evidence:
|
Check stabiliser controls and functions for serviceability, focusing on brakes, implements or other attachments and manoeuvrability Completed |
Evidence:
|
Rectify or report any faults identified Completed |
Evidence:
|
Operate stabiliser
|
|
Identify site hazards associated with stabiliser operations and use safe operating techniques to minimise risk Completed |
Evidence:
|
Identify and apply operating techniques for stabiliser to achieve optimum output in accordance with manufacturers’ design specifications while achieving specified tolerances Completed |
Evidence:
|
Ensure correct operation of stabiliser Completed |
Evidence:
|
Operate stabiliser to produce results, including mixing materials, using additives and line and length Completed |
Evidence:
|
Monitor movements and hazards and identify and communicate changes to the work environment during the work process Completed |
Evidence:
|
Relocate stabiliser
|
|
Move stabiliser safely between worksites in accordance with relevant codes and traffic management requirements Completed |
Evidence:
|
Prepare stabiliser for relocation Completed |
Evidence:
|
Carry out operator maintenance
|
|
Conduct inspection and fault finding in accordance with manufacturers’ specifications and/or organisational requirements Completed |
Evidence:
|
Carry out routine operational servicing and lubrication tasks Completed |
Evidence:
|
Carry out minor maintenance Completed |
Evidence:
|
Record in writing performance of machine constantly to enable timely repair of equipment Completed |
Evidence:
|
Clear work area and recycle or dispose of materials Completed |
Evidence:
|
Clean, check, maintain and store plant, tools and equipment Completed |
Evidence:
|