The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for operations
|
|
Access, interpret and apply compliance documentation relevant to the work activity Completed |
Evidence:
|
Obtain and confirm safety requirements from the site safety plan and organisational policies and procedures, and apply to the allotted task Completed |
Evidence:
|
Identify, obtain and implement signage requirements from the project traffic management plan Completed |
Evidence:
|
Select plant, tools and equipment to carry out tasks consistent with the requirements of the job, check for serviceability and rectify or report any faults Completed |
Evidence:
|
Identify environmental protection requirements from the project environmental management plan, and confirm and apply to the allotted task Completed |
Evidence:
|
Setup operations
|
|
Verify quantity of bars meet task requirements Completed |
Evidence:
|
Confirm bars are fit for purpose Completed |
Evidence:
|
Confirm saw cut locations are marked out or programmed into paving computer as per site specifications Completed |
Evidence:
|
Check automatic program spacing Completed |
Evidence:
|
Check tie bar spacing and variations conform to plans Completed |
Evidence:
|
Check for safe operations and confirm operation of emergency stops Completed |
Evidence:
|
Operate tie bar system
|
|
Maintain safe working area around tie bar inserter Completed |
Evidence:
|
Maintain adequate stock of bars at tie bar inserter Completed |
Evidence:
|
Operate and monitor mechanical or manual tie bar insertion for correct location, alignment and depth (if sidebars) Completed |
Evidence:
|
Report missed bars or jamming immediately to the relevant personnel Completed |
Evidence:
|
Ensure location of any missed or non compliant insertion is recorded by relevant site personnel Completed |
Evidence:
|
Ensure concrete is fully compacted around the tie bar Completed |
Evidence:
|
Ensure magazine is sufficiently loaded at all times Completed |
Evidence:
|
Operate hiab (if fitted) to load magazine safely and accurately Completed |
Evidence:
|
Load magazine by hand according to correct procedures Completed |
Evidence:
|
Clean Up
|
|
Clean up work area at end of day Completed |
Evidence:
|
Return unused stockbars to store Completed |
Evidence:
|