The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare to conduct airless and atomised spraying operations
|
|
Access, interpret and apply airless and atomised spraying operations documentation and ensure the work activity is compliant Completed |
Evidence:
|
Obtain, interpret, clarify and confirm work instructions before proceeding Completed |
Evidence:
|
Identify and implement traffic management signage requirements Completed |
Evidence:
|
Select and check for faults plant, tools and equipment to carry out tasks Completed |
Evidence:
|
Identify, address and report hazards, risks and environmental issues Completed |
Evidence:
|
Select and wear correct personal protective equipment appropriate for work activities Completed |
Evidence:
|
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency Completed |
Evidence:
|
Prepare surface and set out
|
|
Clear area of dirt, debris and other contaminants Completed |
Evidence:
|
Identify location for line marking and set out with control points Completed |
Evidence:
|
Spot straight lines and curves in preparation for marking Completed |
Evidence:
|
Remove pre-existing visible marks/lines Completed |
Evidence:
|
Prepare marking materials
|
|
Mix and prepare marking material Completed |
Evidence:
|
Adjust additives and consistency of material to allow easy application and appropriate drying time Completed |
Evidence:
|
Transfer marking material carefully to applicator container Completed |
Evidence:
|
Apply road marking materials
|
|
Apply airless and/or atomised spray equipment across the surface with the correct movement and pressure Completed |
Evidence:
|
Apply road marking material to the surface providing an even coverage Completed |
Evidence:
|
Identify and correct defects in the coating Completed |
Evidence:
|
Maintain equipment Completed |
Evidence:
|
Measure work
|
|
Assess, record and report work outcomes Completed |
Evidence:
|
Measure, calculate and quantify amount of line marking completed Completed |
Evidence:
|
Identify and report non-conforming work Completed |
Evidence:
|
Clean up
|
|
Clear work area and dispose of or recycle materials Completed |
Evidence:
|
Clean, check, maintain and store tools and equipment Completed |
Evidence:
|
Carry out housekeeping activities Completed |
Evidence:
|
Plan and prepare to conduct airless and atomised spraying operations
|
|
Access, interpret and apply airless and atomised spraying operations documentation and ensure the work activity is compliant Completed |
Evidence:
|
Obtain, interpret, clarify and confirm work instructions before proceeding Completed |
Evidence:
|
Identify and implement traffic management signage requirements Completed |
Evidence:
|
Select and check for faults plant, tools and equipment to carry out tasks Completed |
Evidence:
|
Identify, address and report hazards, risks and environmental issues Completed |
Evidence:
|
Select and wear correct personal protective equipment appropriate for work activities Completed |
Evidence:
|
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency Completed |
Evidence:
|
Prepare surface and set out
|
|
Clear area of dirt, debris and other contaminants Completed |
Evidence:
|
Identify location for line marking and set out with control points Completed |
Evidence:
|
Spot straight lines and curves in preparation for marking Completed |
Evidence:
|
Remove pre-existing visible marks/lines Completed |
Evidence:
|
Prepare marking materials
|
|
Mix and prepare marking material Completed |
Evidence:
|
Adjust additives and consistency of material to allow easy application and appropriate drying time Completed |
Evidence:
|
Transfer marking material carefully to applicator container Completed |
Evidence:
|
Apply road marking materials
|
|
Apply airless and/or atomised spray equipment across the surface with the correct movement and pressure Completed |
Evidence:
|
Apply road marking material to the surface providing an even coverage Completed |
Evidence:
|
Identify and correct defects in the coating Completed |
Evidence:
|
Maintain equipment Completed |
Evidence:
|
Measure work
|
|
Assess, record and report work outcomes Completed |
Evidence:
|
Measure, calculate and quantify amount of line marking completed Completed |
Evidence:
|
Identify and report non-conforming work Completed |
Evidence:
|
Clear work area and dispose of or recycle materials Completed |
Evidence:
|
Clean, check, maintain and store tools and equipment Completed |
Evidence:
|
Carry out housekeeping activities Completed |
Evidence:
|