The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan for rigging
|
|
Access, interpret and apply compliance documentation relevant to the work activity Completed |
Evidence:
|
Obtain, interpret and clarify work requirements before proceeding Completed |
Evidence:
|
Develop a preliminary rigging plan and site sketch taking account of essential information Completed |
Evidence:
|
Check and confirm job feasibility and schedule with the client, the load designer and other persons as appropriate Completed |
Evidence:
|
Confirm hazards associated with the use of cranes and other load moving equipment and identify and check measures to eliminate or control these hazards with appropriate parties Completed |
Evidence:
|
Finalise and confirm rigging plan, including the scheduling of required resources Completed |
Evidence:
|
Safety requirements are followed in accordance with safety plans and policies Completed |
Evidence:
|
Signage/barricade requirements are identified and implemented Completed |
Evidence:
|
Prepare for rigging
|
|
Select and inspect resources, materials and equipment for compliance with job specifications and applicable Australian standards Completed |
Evidence:
|
Inspect lifting equipment according to manufacturer's specifications Completed |
Evidence:
|
Label, reject and dispose lifting equipment which is identified as inconsistent with manufacturer's specifications to prevent its use in any circumstance Completed |
Evidence:
|
Sling loads and slings to protect the load and associated equipment Completed |
Evidence:
|
Secure whole or part loads to prevent uncontrolled movement Completed |
Evidence:
|
Attach and position slings, or parts of slings, to the load to ensure safe movement Completed |
Evidence:
|
Attach slings, or parts of slings, to hook while the hoist wire is vertical Completed |
Evidence:
|
Attach tag lines to the load where specified Completed |
Evidence:
|
Perform test lifts to ensure safe and secure movement of the load where specified Completed |
Evidence:
|
Move loads
|
|
Calculate and confirm appropriate safe working loads and centre gravity using load charts and standard calculation rules prior to load moving Completed |
Evidence:
|
Perform load moving in accordance with the plan, acceptable safe work practices and applicable Australian standards, code of practice and manufacturer's specifications Completed |
Evidence:
|
Perform work safely at heights, within incomplete structures and / or in confined and enclosed spaces Completed |
Evidence:
|
Connect lifting gear to load to Australian standards and manufacturer's specifications Completed |
Evidence:
|
Connect load to movement device using appropriate and certified equipment in accordance with the Australian standards and manufacturer's specifications Completed |
Evidence:
|
Ensure stability of the load by application of load movement procedure, temporary bracing and/or load support appropriate to the task and related manufacturer's specifications Completed |
Evidence:
|
Follow appropriate designers specifications during the placing and securing of the load Completed |
Evidence:
|
Dismantle and remove / restore load shifting equipment in accordance with site requirements Completed |
Evidence:
|
Standard communication signals are used to coordinate safe movement of the load Completed |
Evidence:
|
Clean up
|
|
Work area is cleared and materials disposed of, reused or recycled in accordance with legislation/regulations/code of practice and job specification Completed |
Evidence:
|
Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer's recommendations and standard work practices Completed |
Evidence:
|
Work completion procedures are applied and relevant personnel notified that work is finished Completed |
Evidence:
|