NTISthis.com

Evidence Guide: RIIHAN210D - Perform intermediate rigging operations

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

RIIHAN210D - Perform intermediate rigging operations

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare for intermediate rigging

  1. Access, interpret and apply rigging documentation and ensure the work activity is compliant
  2. Obtain, read, interpret, clarify and confirm work requirements before commencing
  3. Select and wear personal protective equipment appropriate for work activities
  4. Develop a written preliminary rigging plan and site sketch considering essential information
  5. Follow safety information including signage/barricade requirements
  6. Check and confirm job feasibility and schedule with the client, the load designer and other relevant persons
  7. Identify and address potential risks, hazards and environmental issues, and implement control measures
  8. Finalise and confirm rigging plan including the scheduling of required resources
Access, interpret and apply rigging documentation and ensure the work activity is compliant

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain, read, interpret, clarify and confirm work requirements before commencing

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and wear personal protective equipment appropriate for work activities

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Develop a written preliminary rigging plan and site sketch considering essential information

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Follow safety information including signage/barricade requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check and confirm job feasibility and schedule with the client, the load designer and other relevant persons

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and address potential risks, hazards and environmental issues, and implement control measures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finalise and confirm rigging plan including the scheduling of required resources

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare intermediate rigging equipment

  1. Identify, select, inspect, assemble and confirm as serviceable rigging equipment, materials and tools required for the plan
  2. Label for repair or disposal unserviceable equipment, materials and tools
  3. Identify requirement and install fall arrest equipment with ground level installation
  4. Determine and select personal cartage systems
Identify, select, inspect, assemble and confirm as serviceable rigging equipment, materials and tools required for the plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Label for repair or disposal unserviceable equipment, materials and tools

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify requirement and install fall arrest equipment with ground level installation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine and select personal cartage systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Move loads

  1. Calculate and confirm appropriate safe working loads and centre of gravity using load charts and standard calculation rules prior to load moving
  2. Perform load moving in accordance with the plan and acceptable safe work practices
  3. Perform work safely at heights, within incomplete structures and/or in confined and enclosed spaces
  4. Connect lifting gear to load to Australian standards and manufacturer’s specifications
  5. Connect load to movement device using appropriate and certified equipment
  6. Ensure stability of the load by application of load movement procedure, temporary bracing and/or load support appropriate to the task
  7. Move load to required destination and secure in position
  8. Follow appropriate designer’s specifications during the placement and securing of the load
  9. Dismantle and remove/restore load shifting equipment
Calculate and confirm appropriate safe working loads and centre of gravity using load charts and standard calculation rules prior to load moving

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Perform load moving in accordance with the plan and acceptable safe work practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Perform work safely at heights, within incomplete structures and/or in confined and enclosed spaces

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Connect lifting gear to load to Australian standards and manufacturer’s specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Connect load to movement device using appropriate and certified equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ensure stability of the load by application of load movement procedure, temporary bracing and/or load support appropriate to the task

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Move load to required destination and secure in position

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Follow appropriate designer’s specifications during the placement and securing of the load

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dismantle and remove/restore load shifting equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up

  1. Clear work area and dispose, reuse or recycle materials
  2. Clean, check, maintain and store plant, tools and equipment
  3. Apply work completion procedures, notify personnel of work completion
Clear work area and dispose, reuse or recycle materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean, check, maintain and store plant, tools and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply work completion procedures, notify personnel of work completion

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

1. Plan and prepare for intermediate rigging

1.1 Access, interpret and apply rigging documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements before commencing

1.3 Select and wear personal protective equipment appropriate for work activities

1.4 Develop a written preliminary rigging plan and site sketch considering essential information

1.5 Follow safety information including signage/barricade requirements

1.6 Check and confirm job feasibility and schedule with the client, the load designer and other relevant persons

1.7 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.8 Finalise and confirm rigging plan including the scheduling of required resources

2. Prepare intermediate rigging equipment

2.1 Identify, select, inspect, assemble and confirm as serviceable rigging equipment, materials and tools required for the plan

2.2 Label for repair or disposal unserviceable equipment, materials and tools

2.3 Identify requirement and install fall arrest equipment with ground level installation

2.4 Determine and select personal cartage systems

3. Move loads

3.1 Calculate and confirm appropriate safe working loads and centre of gravity using load charts and standard calculation rules prior to load moving

3.2 Perform load moving in accordance with the plan and acceptable safe work practices

3.3 Perform work safely at heights, within incomplete structures and/or in confined and enclosed spaces

3.4 Connect lifting gear to load to Australian standards and manufacturer’s specifications

3.5 Connect load to movement device using appropriate and certified equipment

3.6 Ensure stability of the load by application of load movement procedure, temporary bracing and/or load support appropriate to the task

3.7 Move load to required destination and secure in position

3.8 Follow appropriate designer’s specifications during the placement and securing of the load

3.9 Dismantle and remove/restore load shifting equipment

4. Clean up

4.1 Clear work area and dispose, reuse or recycle materials

4.2 Clean, check, maintain and store plant, tools and equipment

4.3 Apply work completion procedures, notify personnel of work completion

Required Skills and Knowledge

1. Plan and prepare for intermediate rigging

1.1 Access, interpret and apply rigging documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements before commencing

1.3 Select and wear personal protective equipment appropriate for work activities

1.4 Develop a written preliminary rigging plan and site sketch considering essential information

1.5 Follow safety information including signage/barricade requirements

1.6 Check and confirm job feasibility and schedule with the client, the load designer and other relevant persons

1.7 Identify and address potential risks, hazards and environmental issues, and implement control measures

1.8 Finalise and confirm rigging plan including the scheduling of required resources

2. Prepare intermediate rigging equipment

2.1 Identify, select, inspect, assemble and confirm as serviceable rigging equipment, materials and tools required for the plan

2.2 Label for repair or disposal unserviceable equipment, materials and tools

2.3 Identify requirement and install fall arrest equipment with ground level installation

2.4 Determine and select personal cartage systems

3. Move loads

3.1 Calculate and confirm appropriate safe working loads and centre of gravity using load charts and standard calculation rules prior to load moving

3.2 Perform load moving in accordance with the plan and acceptable safe work practices

3.3 Perform work safely at heights, within incomplete structures and/or in confined and enclosed spaces

3.4 Connect lifting gear to load to Australian standards and manufacturer’s specifications

3.5 Connect load to movement device using appropriate and certified equipment

3.6 Ensure stability of the load by application of load movement procedure, temporary bracing and/or load support appropriate to the task

3.7 Move load to required destination and secure in position

3.8 Follow appropriate designer’s specifications during the placement and securing of the load

3.9 Dismantle and remove/restore load shifting equipment

4. Clean up

4.1 Clear work area and dispose, reuse or recycle materials

4.2 Clean, check, maintain and store plant, tools and equipment

4.3 Apply work completion procedures, notify personnel of work completion

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient performance of intermediate rigging operations including:

conducting risk assessment and implementing controls

correctly applying and using all rigging and associated equipment

maintaining written rigging records

works effectively with others to undertake and complete the performance of intermediate rigging operations that meet all of the required outcomes including:

checks and verifies work activity with client, load designer and others

communicating hazards and determining elimination or control of hazards

using a range of communication techniques and systems to convey instruction or information to others

provides end of work handover to relevant personnel

demonstrates completion of performing intermediate rigging operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

writing a preliminary rigging plan which must include the following points in detail:

confirmed details of rigging requirement

confirmed dimensions

site access and egress

suitability and availability of materials

tools and equipment

identification of potential hazards

control measures

identification of site coordination requirements

unless otherwise specified, rigging is to conform with the requirements of any relevant National Certification and/or Standards

performing mathematical calculations for estimation and measurement of loads

identifying, selecting, inspecting, assembling and confirming as serviceable all of the following:

rigging equipment

materials

tools

installing fall arrest equipment with ground level installation

using rope to attach tag lines using knots, bend and hitches

using ropes for splices and whipping techniques

safely moving and correctly relocating the load

performing work safely at heights

dismantle and remove/restore load shifting equipment

clear the work area, check equipment and complete all documentation and reporting requirements

The candidate must demonstrate knowledge of the following when performing intermediate rigging operations:

complying with National Standard for High Risk Worksite and equipment safety requirements

equipment characteristics, technical capabilities and limitations

operational and maintenance procedures

hand and whistle signals

crane operations and limitations

safe work method statements

safety data sheets

practices and regulation for dogging and basic rigging