The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for crane operations
|
|
Access, interpret and apply compliance documentation relevant to the work activity Completed |
Evidence:
|
Access and interpret work requirements and safety information and procedures prior to the commencement of work activity Completed |
Evidence:
|
Apply safety information and procedures throughout the work Completed |
Evidence:
|
Identify and implement signage and barricade requirements Completed |
Evidence:
|
Identify and select equipment to carry out tasks consistent with work requirements Completed |
Evidence:
|
Inspect selected equipment prior to the commencement of work and rectify or report defects that may affect its safe use Completed |
Evidence:
|
Perform pre-start, start-up, park-up and shutdown procedures and position vehicle in accordance with Australian standards, manufacturer's instructions and site procedures Completed |
Evidence:
|
Calculate quantity of load in accordance with plans, specifications, vehicle limitations and/or rigging requirements Completed |
Evidence:
|
Assemble and dismantle attachments in accordance with Australian standards, manufacturer's instructions and work requirements Completed |
Evidence:
|
Determine and implement no-go zones, confirm work area is clear and identify and control crane operating hazards prior to the commencement of the lift Completed |
Evidence:
|
Identify environmental protection requirements and comply with the relevant statutory/regulatory authorities Completed |
Evidence:
|
Operate and maintain a loading crane
|
|
Lift and position loads or personnel using relevant crane controls within manufacturer's specifications Completed |
Evidence:
|
Direct crane operations using recommended load moving signals Completed |
Evidence:
|
Monitor load and crane hook movements and locations throughout the transfer Completed |
Evidence:
|
Identify and respond to emergencies in accordance with manufacturer's instructions and site procedures Completed |
Evidence:
|
Identify and control crane operating hazards and respond to monitoring systems and alarms in accordance with site instructions Completed |
Evidence:
|
Complete work, shut down crane and return to its lock down position Completed |
Evidence:
|
Carry out operator maintenance
|
|
Perform daily/shift vehicle inspections and fault-finding in accordance with manufacturer's instructions, safety information and procedures and work requirements Completed |
Evidence:
|
Perform and record routine operational servicing and report any faults Completed |
Evidence:
|
Process records in accordance with site requirements Completed |
Evidence:
|
Record the results of daily/shift inspections, and report any defects Completed |
Evidence:
|
Clean up
|
|
Clear work area and dispose of reused or recycled materials in accordance with legislation/regulations/code of practice and job specification Completed |
Evidence:
|
Clean, check and store plant, tools and equipment in accordance with manufacturer's recommendations and standard work practices Completed |
Evidence:
|