NTISthis.com

Evidence Guide: RIIMCU308A - Install and recover longwall equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

RIIMCU308A - Install and recover longwall equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare

  1. Access, interpret and apply compliance documentation relevant to the work activity
  2. Obtain, interpret and clarify/confirm work requirements before proceeding
  3. Access, interpret and apply mine environment, geological and survey data required to complete the allocated work
Access, interpret and apply compliance documentation relevant to the work activity

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain, interpret and clarify/confirm work requirements before proceeding

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Access, interpret and apply mine environment, geological and survey data required to complete the allocated work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install and recover equipment

  1. Resolve coordination activities with others at the site prior to commencement of, and during, the work activity
  2. Carry out pre-start, start-up, shutdown and isolation procedures in accordance with manufacturer's instructions and/or site procedures
  3. Complete installation, recovery and machine operation in accordance with manufacturer's instructions and the longwall installation/recovery plan
  4. Act upon or report factors adversely affecting the installation and recovery in accordance with site procedures
  5. Maintain ventilation, identify/monitor changing geological conditions and take action in accordance with site procedures
  6. Recognise and respond to hazardous and emergency situations in accordance with manufacturer's instructions and/or site procedures
  7. Leave workplace safe and in accordance with site procedures
Resolve coordination activities with others at the site prior to commencement of, and during, the work activity

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out pre-start, start-up, shutdown and isolation procedures in accordance with manufacturer's instructions and/or site procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete installation, recovery and machine operation in accordance with manufacturer's instructions and the longwall installation/recovery plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Act upon or report factors adversely affecting the installation and recovery in accordance with site procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain ventilation, identify/monitor changing geological conditions and take action in accordance with site procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recognise and respond to hazardous and emergency situations in accordance with manufacturer's instructions and/or site procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Leave workplace safe and in accordance with site procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out operator maintenance

  1. Carry out longwall equipment inspections and fault finding in accordance with manufacturer's instructions and/or site requirements
  2. Carry out routine operational servicing, lubrication and housekeeping tasks in accordance with manufacturer's instructions and/or site procedures and practices
  3. Carry out minor maintenance to manufacturer's instructions and/or site requirements
  4. Provide operator support during preparation for, and conduct of, maintenance tasks in accordance with site requirements
  5. Process records in accordance with site requirements
Carry out longwall equipment inspections and fault finding in accordance with manufacturer's instructions and/or site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out routine operational servicing, lubrication and housekeeping tasks in accordance with manufacturer's instructions and/or site procedures and practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out minor maintenance to manufacturer's instructions and/or site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Provide operator support during preparation for, and conduct of, maintenance tasks in accordance with site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Process records in accordance with site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:

knowledge of the requirements, procedures and instructions for installing and recovering longwall equipment

implementation of requirements, procedures and techniques for the safe, effective and efficient completion of the installation and recovery of longwall equipment

working with others to undertake and complete the installation and recovery of longwall equipment in a way that meets all of the required outcomes

consistent timely completion of longwall equipment installation and recovery that safely, effectively and efficiently meets the required outcomes

Context of and specific resources for assessment

This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.

Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.

The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.

Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.

Aboriginal people and other people from a non English speaking background may have second language issues.

Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.

Method of assessment

This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:

written and/or oral assessment of the candidate's required knowledge

observed, documented and/or first hand testimonial evidence of the candidate's:

implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes

consistent achievement of required outcomes

first hand testimonial evidence of the candidate's:

working with others to undertake and complete the installation and recovery of longwall equipment

Guidance information for assessment

Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.

Required Skills and Knowledge

Required skills

Specific skills are required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes the ability to carry out the following, as required to install and recover longwall equipment:

apply legislative, organisation and site requirements and procedures for the installation and recovery of longwall equipment

apply operational safety requirements

access, interpret, apply and communicate technical information

interpret survey and geological data

apply hand-eye coordination

apply diagnostic and fault finding techniques

use hand tools

maintain equipment records

comply with environmental requirements

Required knowledge

Specific knowledge is required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes knowledge of the following, as required to install and recover longwall equipment:

site operational safety procedures

longwall equipment operational processes and procedures

longwall equipment characteristics, uses and limitations

site geology and survey data

site ventilation systems

longwall equipment maintenance systems and procedures

site environmental requirements and constraints relevant to longwall equipment installation and recovery

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Relevant compliance documentation may include:

legislative, organisational and site requirements and procedures

manufacturer's guidelines and specifications

management plans

OHS policy

Australian standards

Employment and workplace relations legislation

Equal Employment Opportunity and Disability Discrimination legislation

Work requirements may be in the form of:

shift briefings

handover details

work orders

Work requirements details may include:

equipment, including defects

cutting height

next cutting sequence

achievement targets

essential survey data

geological conditions

hazards

potential hazards

coordination requirements/issues

Mine environmental, geological and survey data may be in the form of:

ventilation/gas data

Deputy reports

geological hazard plan

survey data

Emergency situations may include:

roof and rib fall

fire

flash

explosion

outbursts

inrush

Longwall equipment to be installed or recovered may include:

pantech

AFC

pans

tailgate/maingate

breaker line supports

shearer

cables

airhoses

hydraulic chocks

bretby monorail

Hazards/potential hazards may include:

heavy machinery

gas accumulation

roof-rib

water

dust

diesel fumes

high pressure hoses

lifting

pulling equipment

heat

Equipment may include:

chock transporter

impro

mine dozer (electric or diesel)

chainblocks

winches

roof bolters

multipurpose vehicles

re-reelers

load haul dump vehicles

E-Frame

diesel locos

Coordination activities may include those with:

equipment operators

transportation operators

Operator (operational) maintenance procedures are those established and authorised for the site.