NTISthis.com

Evidence Guide: RIINHB309A - Conduct guided boring

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

RIINHB309A - Conduct guided boring

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare for guided boring

  1. Access, interpret and apply compliance documentation relevant to the work activity
  2. Obtain, confirm and apply work instructions for the allocated task
  3. Identify, manage and report all potential hazards
  4. Identify, locate and apply personal protective equipment
  5. Raise alarm/report as required according to site procedures
  6. Resolve coordination requirements with others at the site prior to commencing and during work activities
Access, interpret and apply compliance documentation relevant to the work activity

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain, confirm and apply work instructions for the allocated task

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify, manage and report all potential hazards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify, locate and apply personal protective equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Raise alarm/report as required according to site procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Resolve coordination requirements with others at the site prior to commencing and during work activities

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bore pilot hole

  1. Confirm that all preliminary and safety checks have been done
  2. Fit locating device to drill head and attach drill head to drill stem
  3. Align drilling head with survey tool and survey control system
  4. Drill pilot hole according to design alignment
  5. Monitor drill path ensuring pilot hole meets conformance envelope and dogleg severity is within limits
  6. Add drill stem sections as required
  7. Steer, and where required, zone steer drill head to achieve required pitch and direction
  8. Monitor and interpret all gauge/dial readings
  9. Monitor and interpret drill fluid return and drill spoil
  10. Monitor and interpret drill head position and pitch
  11. Maintain communication with all relevant personnel
  12. Maintain drill log and reports as required
Confirm that all preliminary and safety checks have been done

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fit locating device to drill head and attach drill head to drill stem

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Align drilling head with survey tool and survey control system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Drill pilot hole according to design alignment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor drill path ensuring pilot hole meets conformance envelope and dogleg severity is within limits

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Add drill stem sections as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Steer, and where required, zone steer drill head to achieve required pitch and direction

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor and interpret all gauge/dial readings

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor and interpret drill fluid return and drill spoil

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor and interpret drill head position and pitch

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain communication with all relevant personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain drill log and reports as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete back reaming, and product pull back

  1. Lock out machine
  2. Remove drill head
  3. Check free rotation of swivel
  4. Connect appropriate back reamer, swivel and product
  5. Locate product feed to prevent damage and within breakover limitations
  6. Check all safety precautions are in place and restart machine
  7. Back reaming/pre-ream, and install product, removing drill stem sections to procedure as required
  8. Monitor and interpret all gauge/dial readings
  9. Monitor and interpret drill fluid flow from both ends of hole
  10. Monitor product feed
  11. Maintain communication with all relevant personnel
  12. Take required actions to achieve satisfactory product installation as required
  13. Maintain drill log and reports as required
Lock out machine

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove drill head

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check free rotation of swivel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Connect appropriate back reamer, swivel and product

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Locate product feed to prevent damage and within breakover limitations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check all safety precautions are in place and restart machine

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Back reaming/pre-ream, and install product, removing drill stem sections to procedure as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor and interpret all gauge/dial readings

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor and interpret drill fluid flow from both ends of hole

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor product feed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain communication with all relevant personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Take required actions to achieve satisfactory product installation as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain drill log and reports as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain equipment

  1. Monitor wear on drill stem, particularly threads
  2. Dress damaged threads or replace drill stem as required
  3. Check all equipment and hoses
  4. Monitor wear on drill heads and reamers and take required action
  5. Clean all equipment upon completion of bore, ensuring environmental controls are followed
  6. Rotate drill stems in stack
  7. Ensure drill fluid is appropriately contained/disposed of
  8. Ensure other maintenance tasks are completed regularly
  9. Keep site safe for all possible users for the total duration of the job
  10. Leave site in a safe and tidy condition which complies with all relevant regulations
Monitor wear on drill stem, particularly threads

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dress damaged threads or replace drill stem as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check all equipment and hoses

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor wear on drill heads and reamers and take required action

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean all equipment upon completion of bore, ensuring environmental controls are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Rotate drill stems in stack

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ensure drill fluid is appropriately contained/disposed of

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ensure other maintenance tasks are completed regularly

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Keep site safe for all possible users for the total duration of the job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Leave site in a safe and tidy condition which complies with all relevant regulations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Respond to problems

  1. Identify possible problems in equipment or process
  2. Determine problems needing action
  3. Determine possible fault causes
  4. Rectify problem using appropriate solution within area of responsibility
  5. Follow through items initiated until final resolution has occurred
  6. Report problems outside area of responsibility to designated person
Identify possible problems in equipment or process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine problems needing action

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine possible fault causes

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Rectify problem using appropriate solution within area of responsibility

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Follow through items initiated until final resolution has occurred

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Report problems outside area of responsibility to designated person

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to worksite operations and satisfy all of the requirements of the performance criteria, required skills and knowledge and the range statement of this unit and include evidence of the following:

knowledge of the requirements, procedures and instructions for conducting guided boring

implementation of requirements, procedures and techniques for the safe, effective and efficient completion of guided boring

working with others to undertake and complete the conduct of guided bores that meets all of the required outcomes

consistent timely completion of guided boring that safely, effectively and efficiently meets the required outcomes

Context of and specific resources for assessment

This unit must be assessed in the context of the work environment. Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated environment provided it is realistic and sufficiently rigorous to cover all aspects of workplace performance, including task skills, task management skills, contingency management skills and job role environment skills.

Assessment of this competency requires typical resources normally used in a resources and infrastructure sector environment. Selection and use of resources for particular worksites may differ due to the site circumstances.

The assessment environment should not disadvantage the participant. For example, language, literacy and numeracy demands of assessment should not be greater than those required on the job.

Customisation of assessment and delivery environment to sensitively accommodate cultural diversity.

Aboriginal people and other people from a non English speaking background may have second language issues.

Where applicable, physical resources should include equipment modified for people with disabilities. Access must be provided to appropriate learning and/or assessment support when required.

Method of assessment

This unit may be assessed in a holistic way with other units of competency. The assessment strategy for this unit must verify required knowledge and skill and practical application using more than one of the following assessment methods:

written and/or oral assessment of the candidate's required knowledge

observed, documented and/or first hand testimonial evidence of the candidate's:

implementation of appropriate requirement, procedures and techniques for the safe, effective and efficient achievement of required outcomes

consistent achievement of required outcomes

first hand testimonial evidence of the candidate's:

working with others to undertake and complete the conduct of guided bores

Guidance information for assessment

Consult the SkillsDMC User Guide for further information on assessment including access and equity issues.

Required Skills and Knowledge

Required skills

Specific skills are required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes the ability to carry out the following, as required to conduct guided boring:

apply legislative, organisation and site requirements and procedures for conducting guided boring

interpret site requirements and procedures

interpret work requirements

interpret geological and survey data

apply mechanical and manual handling safety requirements and procedures

apply metric and imperial units conversion

apply mathematical calculations using addition, subtraction, multiplication and division

use a calculator to calculate hole volume

Required knowledge

Specific knowledge is required to achieve the Performance Criteria of this unit, particularly for its application in the various circumstances in which this unit may be used. This includes knowledge of the following, as required to conduct guided boring:

worksite coordination requirements and procedures

site operating techniques and systems

monitoring systems and alarms requirements and procedures

ground preparation requirements and procedures

inspection, fault finding and reporting requirements and procedures

routine operator servicing, maintenance and housekeeping requirements and procedures

site environmental and heritage requirements and constraints

dust suppression techniques

drill system characteristics, technical capability and limitations

use of diagrams, plans and instructions for positioning, recording work or progress

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Relevant compliance documentation may include:

legislative, organisational and site requirements and procedures

manufacturer's guidelines and specifications

Australian standards

code of practice

Employment and workplace relations legislation

Equal Employment Opportunity and Disability Discrimination legislation

Work instructions may come from briefings, handovers, plans and work orders and may be written or verbal, formal or informal and may include:

nature and scope of tasks

specifications

quality of finished works

achieved targets

operational conditions

obtaining of required permits

site layout

out of bounds areas

worksite inspection requirements

lighting conditions

plant of equipment defects

coordination requirements or issues

contamination control requirements

environmental control requirements

barricade and signage requirements

Hazards may include:

working in proximity to drilling rig

buried utilities in path of bore, including:

electrical power lines (overhead or buried)

gas pipes

water pipes

waste pipes (including stormwater, trade waste and sewerage)

changing geological formations, particularly cobble, rock or unstable/porous formation

Personal protective equipment may include:

electrically insulating boots and gloves

eye and hearing protection

equipment for confined space entry

general protective clothing

Coordination requirements may include:

other equipment operators

maintenance personnel

supervisors

site personnel

Drill head may include:

displacement (e.g. slant nose tool/duck bill - standard or carbide)

cutting (e.g. mud motor, down hole hammer)

Fluid may include:

bentonite clay

polymer

pH adjusting agents such as soda ash

Back reamer may include:

spiral

flute

helical

Product may include:

welded steel pipe

polythene pipe (low/high density)

polypropylene pipe

PVC pipe

plastic drainage (perforated) pipe

Maintenance tasks may include:

checking threads with thread gauge

dressing threads

lubricating threads and other components

cleaning all equipment and checking for wear and damage