The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for the installing underground in-seam directional drilling standpipe
|
|
Access, interpret and apply compliance documentation relevant to the work activity Completed |
Evidence:
|
Obtain, confirm and apply work instructions for the allocated task Completed |
Evidence:
|
Identify, manage and report all potential hazards Completed |
Evidence:
|
Resolve coordination requirements with others at the site prior to commencing and during work activities Completed |
Evidence:
|
Perform rib consolidation
|
|
Prepare for rib consolidation drilling in accordance with the drill plan Completed |
Evidence:
|
Carry out rib consolidation drilling in accordance with the drill plan Completed |
Evidence:
|
Monitor and adjust drilling technique according to conditions Completed |
Evidence:
|
Identify and remedy operational problems Completed |
Evidence:
|
Insert and seal grouting tubes into rib consolidation holes in accordance with the rib consolidation drill plan Completed |
Evidence:
|
Inject grout through the grouting tubes until visible evidence that grout has migrated into any coal rib fractures or cracks. Completed |
Evidence:
|
Carryout individual grouting completion procedure. Completed |
Evidence:
|
Drill and ream hole and install standpipe
|
|
Prepare for drilling and reaming in accordance with the drill plan Completed |
Evidence:
|
Choose drill bit and reamer appropriate to the geology Completed |
Evidence:
|
Carry pilot hole drilling and ream standpipe hole in accordance with the drill plan Completed |
Evidence:
|
Monitor and adjust drilling technique according to conditions Completed |
Evidence:
|
Identify and remedy operational problems Completed |
Evidence:
|
Prepare and install standpipe in accordance with the drill plan Completed |
Evidence:
|
Grout in standpipe in accordance with the drill plan Completed |
Evidence:
|
Maintain communication with all relevant personnel Completed |
Evidence:
|
Maintain equipment and housekeeping
|
|
Monitor the drill rods for wear and damage and dress and grease threads in accordance with standard procedures or replace rods as required. Completed |
Evidence:
|
Monitor all drill equipment and hoses and ancillary equipment and carryout remedial action Completed |
Evidence:
|
Apply environmental controls Completed |
Evidence:
|
Maintain safe and tidy site for the duration and at the conclusion of the job Completed |
Evidence:
|
Clean and maintain all grouting equipment Completed |
Evidence:
|