The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for the grouting or cementing process
|
|
Access, interpret and apply compliance documentation relevant to drilling industry grouting and cementing operations Completed |
Evidence:
|
Obtain, confirm and apply work instructions for the allocated task Completed |
Evidence:
|
Identify, manage and report all potential hazards Completed |
Evidence:
|
Resolve coordination requirements with others at the site prior to commencing and during work during the grouting or cementing process Completed |
Evidence:
|
Obtain and use appropriate personal protective equipment for grouting or cementing operations as listed in the work instructions or materials safety data sheets (MSDS) Completed |
Evidence:
|
Ensure adequate material and equipment is available to complete the task successfully Completed |
Evidence:
|
Select the appropriate grouting or cementing procedure to suite the application Completed |
Evidence:
|
Perform measurement and calculations
|
|
Read tape measure accurately to carry out measurements of tank capacities, casing or rod lengths as required Completed |
Evidence:
|
Record or complete tally sheets for number of lengths of casing placed in the hole as required Completed |
Evidence:
|
Carry out calculations and measurements Completed |
Evidence:
|
Record legibly on all reports Completed |
Evidence:
|
Conduct grouting or cementing of hole
|
|
Manage mixing grout and any additives as per standard procedures Completed |
Evidence:
|
Ensure that materials safety data sheets (MSDS) requirements for all materials used are followed Completed |
Evidence:
|
Conduct grouting or cementing of hole using appropriate equipment and techniques Completed |
Evidence:
|
Place grout or cement using appropriate techniques Completed |
Evidence:
|
Monitor process to ensure consistency and accuracy of placed grout or cement Completed |
Evidence:
|
Construct well head, hole identification and install hole security devices if required Completed |
Evidence:
|
Dispose of any excess grout or cement according to site waste management procedures Completed |
Evidence:
|
Respond to problems
|
|
Identify possible operational problems in equipment or process Completed |
Evidence:
|
Identify symptoms of problems needing remedial action Completed |
Evidence:
|
Determine possible fault causes Completed |
Evidence:
|
Rectify problem using appropriate solution within area of responsibility Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred Completed |
Evidence:
|
Report problems outside area of responsibility to designated person Completed |
Evidence:
|
Manage cleaning of all equipment at completion of grouting or cementing operations
|
|
Ensure there is no spillage of grout, cement or additives to minimise any associated safety hazards Completed |
Evidence:
|
Ensure cleaning equipment is used safely and effectively Completed |
Evidence:
|
Give approved instructions and occupational health and safety requirements on the use of hazardous chemicals for cleaning Completed |
Evidence:
|
Ensure that all cleaning equipment is kept in good working condition Completed |
Evidence:
|