NTISthis.com

Evidence Guide: RIIOGD401D - Rig up, conduct pre-spud operations and rig down

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

RIIOGD401D - Rig up, conduct pre-spud operations and rig down

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare rig up, conduct pre-spud operations and rig down

  1. Access, interpret and apply rig up, conduct pre-spud operations and rig down documentation and ensure the work activity is compliant
  2. Obtain, read, interpret, clarify and confirm work requirements
  3. Identify, address and report potential hazards, risks and environmental issues and implement control measures
  4. the work activities
  5. to commencing, during, and on completion of work activities
  6. Carry out pre rig-up procedure inspections (by rig manager, operator and crew)
  7. Coordinate movement of load and sequence of installation and location
  8. Check equipment for damage and/or loss by moving contractor and report and BI
Access, interpret and apply rig up, conduct pre-spud operations and rig down documentation and ensure the work activity is compliant

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain, read, interpret, clarify and confirm work requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify, address and report potential hazards, risks and environmental issues and implement control measures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

the work activities

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

to commencing, during, and on completion of work activities

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out pre rig-up procedure inspections (by rig manager, operator and crew)

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Coordinate movement of load and sequence of installation and location

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check equipment for damage and/or loss by moving contractor and report and BI

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Rig up to spud

  1. Receive and action rig manager authorisation to commence rig-up to spud operations
  2. Receive detailed verbal and written instructions on use and type of mud from the operator and distribute
  3. Identify potential rig-up problems and take corrective action
  4. Keep rig manager informed of operations
Receive and action rig manager authorisation to commence rig-up to spud operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Receive detailed verbal and written instructions on use and type of mud from the operator and distribute

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify potential rig-up problems and take corrective action

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Keep rig manager informed of operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

hole/subsea hole

  1. Check drilling and hoist equipment, report damage to rig manager and record
  2. Conduct equipment checks for nippling-up or cross-checked with relevant procedures
  3. Check handling equipment for correct sizing and if fit for purpose
  4. Confirm availability of and inspect, clean, calibrate and record tubulars
  5. Check well control equipment
  6. Identify special tool requirements and check if fit for purpose and approved for use
Check drilling and hoist equipment, report damage to rig manager and record

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct equipment checks for nippling-up or cross-checked with relevant procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check handling equipment for correct sizing and if fit for purpose

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Confirm availability of and inspect, clean, calibrate and record tubulars

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check well control equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify special tool requirements and check if fit for purpose and approved for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for pre-spud operations

  1. Lock pipe racks with drill pipe and position drill collars
  2. Inspect casing running tools for safety and fitness-for-purpose and rectify and/or report faults and malfunctions
  3. Record casing tallies and report
Lock pipe racks with drill pipe and position drill collars

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect casing running tools for safety and fitness-for-purpose and rectify and/or report faults and malfunctions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record casing tallies and report

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct operations as per drilling program

  1. Determine optimum circulating and penetration rates and check deviations are in accordance with operators drilling program
  2. Continually check mud cleaning equipment and screens for integrity and correct operation
  3. Check drilling fluid quantities with sufficient being in reserve to kill well and keep hole on full trip
  4. Record correct mud properties on tour report
  5. Operate all equipment in accordance with manufacturer regulations and company procedures
  6. Maintain a sound working relationship with third party contractors
Determine optimum circulating and penetration rates and check deviations are in accordance with operators drilling program

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Continually check mud cleaning equipment and screens for integrity and correct operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check drilling fluid quantities with sufficient being in reserve to kill well and keep hole on full trip

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record correct mud properties on tour report

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate all equipment in accordance with manufacturer regulations and company procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain a sound working relationship with third party contractors

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Rig down

  1. Receive and action rig manager authorisation to commence rig-down operations
  2. Identify potential rig-down problems and take corrective action
  3. Keep rig manager informed of operations
Receive and action rig manager authorisation to commence rig-down operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify potential rig-down problems and take corrective action

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Keep rig manager informed of operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct housekeeping activities

  1. Clean, check, maintain and store plant, tools and equipment
  2. Report issues identified with plant, tools and equipment
Clean, check, maintain and store plant, tools and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Report issues identified with plant, tools and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare for drilling of surface hole/subsea hole

  1. Check drilling and hoist equipment, report damage to rig manager and record
  2. Conduct equipment checks for nippling-up or cross-checked with relevant procedures
  3. Check handling equipment for correct sizing and if fit for purpose
  4. Confirm availability of and inspect, clean, calibrate and record tubulars
  5. Check well control equipment
  6. Identify special tool requirements and check if fit for purpose and approved for use
Check drilling and hoist equipment, report damage to rig manager and record

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct equipment checks for nippling-up or cross-checked with relevant procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check handling equipment for correct sizing and if fit for purpose

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Confirm availability of and inspect, clean, calibrate and record tubulars

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check well control equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify special tool requirements and check if fit for purpose and approved for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

1. Plan and prepare rig up, conduct pre-spud operations and rig down

1.1 Access, interpret and apply rig up, conduct pre-spud operations and rig down documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify, address and report potential hazards, risks and environmental issues and implement control measures

1.4 Select and wear personal protective equipment appropriate to the work activities

1.5 Resolve coordination requirements with others at the site prior to commencing, during, and on completion of work activities

1.6 Carry out pre rig-up procedure inspections (by rig manager, operator and crew)

1.7 Coordinate movement of load and sequence of installation and location

1.8 Check equipment for damage and/or loss by moving contractor and report and BI

2. Rig up to spud

2.1 Receive and action rig manager authorisation to commence rig-up to spud operations

2.2 Receive detailed verbal and written instructions on use and type of mud from the operator and distribute

2.3 Identify potential rig-up problems and take corrective action

2.4 Keep rig manager informed of operations

3. Prepare for drilling of surface hole/subsea hole

3.1 Check drilling and hoist equipment, report damage to rig manager and record

3.2 Conduct equipment checks for nippling-up or cross-checked with relevant procedures

3.3 Check handling equipment for correct sizing and if fit for purpose

3.4 Confirm availability of and inspect, clean, calibrate and record tubulars

3.5 Check well control equipment

3.6 Identify special tool requirements and check if fit for purpose and approved for use

4. Prepare for pre-spud operations

4.1 Lock pipe racks with drill pipe and position drill collars

4.2 Inspect casing running tools for safety and fitness-for-purpose and rectify and/or report faults and malfunctions

4.3 Record casing tallies and report

5. Conduct operations as per drilling program

5.1 Determine optimum circulating and penetration rates and check deviations are in accordance with operators drilling program

5.2 Continually check mud cleaning equipment and screens for integrity and correct operation

5.3 Check drilling fluid quantities with sufficient being in reserve to kill well and keep hole on full trip

5.4 Record correct mud properties on tour report

5.5 Operate all equipment in accordance with manufacturer regulations and company procedures

5.6 Maintain a sound working relationship with third party contractors

Required Skills and Knowledge

1. Plan and prepare rig up, conduct pre-spud operations and rig down

1.1 Access, interpret and apply rig up, conduct pre-spud operations and rig down documentation and ensure the work activity is compliant

1.2 Obtain, read, interpret, clarify and confirm work requirements

1.3 Identify, address and report potential hazards, risks and environmental issues and implement control measures

1.4 Select and wear personal protective equipment appropriate to the work activities

1.5 Resolve coordination requirements with others at the site prior to commencing, during, and on completion of work activities

1.6 Carry out pre rig-up procedure inspections (by rig manager, operator and crew)

1.7 Coordinate movement of load and sequence of installation and location

1.8 Check equipment for damage and/or loss by moving contractor and report and BI

2. Rig up to spud

2.1 Receive and action rig manager authorisation to commence rig-up to spud operations

2.2 Receive detailed verbal and written instructions on use and type of mud from the operator and distribute

2.3 Identify potential rig-up problems and take corrective action

2.4 Keep rig manager informed of operations

3. Prepare for drilling of surface hole/subsea hole

3.1 Check drilling and hoist equipment, report damage to rig manager and record

3.2 Conduct equipment checks for nippling-up or cross-checked with relevant procedures

3.3 Check handling equipment for correct sizing and if fit for purpose

3.4 Confirm availability of and inspect, clean, calibrate and record tubulars

3.5 Check well control equipment

3.6 Identify special tool requirements and check if fit for purpose and approved for use

4. Prepare for pre-spud operations

4.1 Lock pipe racks with drill pipe and position drill collars

4.2 Inspect casing running tools for safety and fitness-for-purpose and rectify and/or report faults and malfunctions

4.3 Record casing tallies and report

5. Conduct operations as per drilling program

5.1 Determine optimum circulating and penetration rates and check deviations are in accordance with operators drilling program

5.2 Continually check mud cleaning equipment and screens for integrity and correct operation

5.3 Check drilling fluid quantities with sufficient being in reserve to kill well and keep hole on full trip

5.4 Record correct mud properties on tour report

5.5 Operate all equipment in accordance with manufacturer regulations and company procedures

5.6 Maintain a sound working relationship with third party contractors

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies relevant documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient completion of rig up, pre-spud and rig down operations including:

identifying, addressing and reporting potential hazards and risks

controlling identified hazards

checking equipment for damage and/or loss by moving contractor and report and BI

identifying, addressing and reporting environmental issues

works effectively with others to plan, prepare and conduct rig up, pre-spud and rig down operations to meet all required outcomes including:

resolving coordination requirements with others at the site prior to commencing and during work activities

carrying out pre rig-up procedure inspections (by rig manager, operator and crew)

coordinating movement of load and sequence of installation and location in accordance with rig movement plan

preparing for and organising work activities to meet all task requirements

communicating clearly and concisely with others to receive and clarify work instructions

using a range of communication techniques and aids to advise others of work activity and exclusion zones taking corrective action

demonstrates completion of rig up, pre-spud and rig down operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

identifying potential rig-up problems

checking drilling and hoist equipment

determining optimum circulating and penetration rates and checking deviations

receiving and actioning authorisation to commence drilling

identifying potential rig-down operations

carrying out effective supervision of rig up, pre-spud and rig down operations that meets all required outcomes

The candidate must demonstrate knowledge in applying the rig up, conduct pre-spud operations and rig down through:

accessing, interpreting and applying legislative, organization and site requirements and procedures for:

identifying and managing risks

identifying, addressing and reporting environmental issues

setting up work activity

site isolation, signage and erecting barriers

work health and safety

selecting and checking for faults, all plant, tools and equipment to carry out tasks

optimum circulating and penetration rates

carrying out work to specifications

applying effective techniques for applying rig up, pre-spud and rig down operations

applying standard working practices and procedures for rig up, pre-spud and rig down operations

troubleshoot during drilling program

carrying out calculations including:

quantities

up-hole velocity

specific gravity

volume

hydrostatic pressures