The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare to carry out drilling Industry operational maintenance
|
|
Obtain, interpret and confirm work requirements Completed |
Evidence:
|
Access, interpret and apply drilling service and maintenance documentation and confirm work activity is compliant Completed |
Evidence:
|
Identify and minimise environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures Completed |
Evidence:
|
Select and wear personal protective equipment required for work activity Completed |
Evidence:
|
Communicate with other personnel at site according to work requirements and confirm briefings and handover details are communicated and received Completed |
Evidence:
|
Obtain and interpret emergency procedures and identify steps required in case of fires, accidents and other emergencies Completed |
Evidence:
|
Carry out pre-drilling checks and maintenance
|
|
Carry out predrilling checks according to manufacturer specifications Completed |
Evidence:
|
Complete workplace and/or site documentation according to workplace procedures Completed |
Evidence:
|
Access and apply lubrication schedule according to workplace procedures and manufacturer specifications Completed |
Evidence:
|
Top up fluid levels and bleed lines according to work requirements and manufacturer specifications Completed |
Evidence:
|
Check filters and clean/replace as required Completed |
Evidence:
|
Check security of all circulation systems Completed |
Evidence:
|
Ensure cabin and windscreen are clean and seat belts and windscreen washer function Completed |
Evidence:
|
Perform machine checks
|
|
Carry out equipment inspection, servicing and lubrication according to manufacturer specifications Completed |
Evidence:
|
Identify faults or potential faults Completed |
Evidence:
|
Observe isolation/tag out/lock out procedures Completed |
Evidence:
|
Identify, record and/or report requirement for repair or maintenance and critical timeline for rectification Completed |
Evidence:
|
Monitor effectiveness of maintenance performed Completed |
Evidence:
|
Maintain all down hole tools and other drilling consumables
|
|
Carry out component maintenance according to workplace procedures and manufacturer specifications Completed |
Evidence:
|
Maintain and store tools and consumables according to workplace procedures Completed |
Evidence:
|
Perform machinery maintenance
|
|
Access and apply scheduled machinery servicing, maintenance and overhauls Completed |
Evidence:
|
Use tag out/lock out when servicing Completed |
Evidence:
|
Carry out minor servicing of equipment according to manufacturer specification Completed |
Evidence:
|
Carry out routine inspection, servicing, lubrication and housekeeping tasks according to workplace procedures Completed |
Evidence:
|
Read and apply instructions on maintenance procedures, lubrication tasks and filter change/service Completed |
Evidence:
|
Identify, record and replace worn parts according to workplace procedures and manufacturer specifications Completed |
Evidence:
|
Conduct diagnostic and troubleshooting techniques and take remedial action Completed |
Evidence:
|
Identify operational faults in and maintain hydraulic systems Completed |
Evidence:
|
Report service and repair requirements and take remedial action according to workplace procedures Completed |
Evidence:
|
Perform equipment and machinery field repairs
|
|
Isolate and rectify equipment faults according to manufacturer specifications Completed |
Evidence:
|
Identify extent of repair needed and obtain spare parts Completed |
Evidence:
|
Identify, select and use tools required for maintenance and repairs Completed |
Evidence:
|
Identify and return re-usable parts/components or accessories Completed |
Evidence:
|
Review equipment and re-set in response to site conditions Completed |
Evidence:
|
Identify system faults and formulate appropriate responses within agreed timelines Completed |
Evidence:
|
Maintain service records according to workplace procedures Completed |
Evidence:
|
Dismantle, assess, service, repair, reassemble and test drill components according to manufacturer specifications Completed |
Evidence:
|