The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for operating a winder for shaft sinking
|
|
Access, interpret and apply documentation and procedures for operating a winder for shaft sinking and ensure the work activity is compliant Completed |
Evidence:
|
Receive, interpret and clarify shift changeover details Completed |
Evidence:
|
Select and wear appropriate personal protective equipment Completed |
Evidence:
|
Perform equipment and work area pre-start checks Completed |
Evidence:
|
Check written records for outstanding maintenance/inspections and recorded defects and take action Completed |
Evidence:
|
Identify, address and report potential risks and hazards Completed |
Evidence:
|
Carry out start-up procedures, including checking that area is clear for operations Completed |
Evidence:
|
Adhere to emergency procedures Completed |
Evidence:
|
Apply dust suppression and extraction methods Completed |
Evidence:
|
Ensure control cabin is environmentally and ergonomically sound Completed |
Evidence:
|
Conduct shaft sinking using manual winder
|
|
Communicate with relevant personnel Completed |
Evidence:
|
Confirm kibble is ready for operation Completed |
Evidence:
|
Initiate the system, follow start-up procedures and operate winder, complying with directions from the person in charge Completed |
Evidence:
|
Monitor and manage winder performance using appropriate indicators Completed |
Evidence:
|
Adjust speed and movement Completed |
Evidence:
|
Operate winder (or winders) for shaft sinking operations Completed |
Evidence:
|
Carry out shutdown procedures Completed |
Evidence:
|
Carry out winder inspections
|
|
Isolate and prove isolation of equipment Completed |
Evidence:
|
Inspect winder and auxiliary equipment and report faults/defects Completed |
Evidence:
|
Prepare winder for routine servicing Completed |
Evidence:
|
Conduct end-of-shift
|
|
Complete all required written documentation Completed |
Evidence:
|
Pass on end of shift information verbally or in writing and hand over control to oncoming shift Completed |
Evidence:
|
Ensure control room is clean and tidy Completed |
Evidence:
|
Plan and prepare for operating a winder for shaft sinking
|
|
Access, interpret and apply documentation and procedures for operating a winder for shaft sinking and ensure the work activity is compliant Completed |
Evidence:
|
Receive, interpret and clarify shift changeover details Completed |
Evidence:
|
Select and wear appropriate personal protective equipment Completed |
Evidence:
|
Perform equipment and work area pre-start checks Completed |
Evidence:
|
Check written records for outstanding maintenance/inspections and recorded defects and take action Completed |
Evidence:
|
Identify, address and report potential risks and hazards Completed |
Evidence:
|
Carry out start-up procedures, including checking that area is clear for operations Completed |
Evidence:
|
Adhere to emergency procedures Completed |
Evidence:
|
Apply dust suppression and extraction methods Completed |
Evidence:
|
Ensure control cabin is environmentally and ergonomically sound Completed |
Evidence:
|
Conduct shaft sinking using manual winder
|
|
Communicate with relevant personnel Completed |
Evidence:
|
Confirm kibble is ready for operation Completed |
Evidence:
|
Initiate the system, follow start-up procedures and operate winder, complying with directions from the person in charge Completed |
Evidence:
|
Monitor and manage winder performance using appropriate indicators Completed |
Evidence:
|
Adjust speed and movement Completed |
Evidence:
|
Operate winder (or winders) for shaft sinking operations Completed |
Evidence:
|
Carry out shutdown procedures Completed |
Evidence:
|
Carry out winder inspections
|
|
Isolate and prove isolation of equipment Completed |
Evidence:
|
Inspect winder and auxiliary equipment and report faults/defects Completed |
Evidence:
|
Prepare winder for routine servicing Completed |
Evidence:
|
Conduct end-of-shift
|
|
Complete all required written documentation Completed |
Evidence:
|
Pass on end of shift information verbally or in writing and hand over control to oncoming shift Completed |
Evidence:
|
Ensure control room is clean and tidy Completed |
Evidence:
|