NTISthis.com

Evidence Guide: SISOSCB307A - Inspect and fill SCUBA cylinders

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

SISOSCB307A - Inspect and fill SCUBA cylinders

What evidence can you provide to prove your understanding of each of the following citeria?

Conduct inspection of a SCUBA cylinder.

  1. Undertake exterior inspection and interior inspection of a SCUBA cylinder according to industry technical and safety criteria, relevant legislation, organisational policies and procedures and Australian Standards.
  2. Apply re-valving, cleaning and drying procedures.
  3. Document cylinder owner and inspection station details according to industry technical and safety criteria.
  4. Establish parameters for failure according to Australian Standards.
Undertake exterior inspection and interior inspection of a SCUBA cylinder according to industry technical and safety criteria, relevant legislation, organisational policies and procedures and Australian Standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply re-valving, cleaning and drying procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Document cylinder owner and inspection station details according to industry technical and safety criteria.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Establish parameters for failure according to Australian Standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fill a SCUBA cylinder.

  1. Determine operation and maintenance procedures according to manufacturer's specifications.
  2. Identify complying and non-complying cylinders prior to filling.
  3. Operate and maintain a high pressure compressor according to industry technical and safety criteria and manufacturers specifications.
  4. Test air purity regularly, ensuring air purity meets or exceeds industry standards.
  5. Handle, store and restrain cylinders according to industry criteria.
  6. Open the cylinder valves and begin filling the cylinder to correct capacity according to manufacturer's specifications and Australian Standards.
  7. Perform leak testing and complete documentation according to Australian Standards.
Determine operation and maintenance procedures according to manufacturer's specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify complying and non-complying cylinders prior to filling.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate and maintain a high pressure compressor according to industry technical and safety criteria and manufacturers specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test air purity regularly, ensuring air purity meets or exceeds industry standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Handle, store and restrain cylinders according to industry criteria.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Open the cylinder valves and begin filling the cylinder to correct capacity according to manufacturer's specifications and Australian Standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Perform leak testing and complete documentation according to Australian Standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

conducts detailed exterior and interior inspections of SCUBA cylinders to determine condition and detect any damage

fills SCUBA cylinders to correct capacity according to Australian Standards, industry technical and safety criteria, relevant legislation and organisational policies and procedures

documents details of air purity and leakage tests, inspections and cylinder filling, including details of compliance or non compliance.

Context of and specific resources for assessment

Assessment must ensure inspecting and filling SCUBA cylinders on sufficient occasions to demonstrate competency and consistency of performance.

Assessment must also ensure access to:

a variety of SCUBA cylinders in various conditions

SCUBA cylinder inspection equipment such as vice or clamp and spanners

resources and equipment to conduct inspections and fill SCUBA cylinders

maintenance history of SCUBA tank.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

oral or written questioning to assess knowledge of exterior and interior inspection techniques and procedures used to fill SCUBA cylinders

observation of safe operation, maintenance and handling of high pressure gas compressors and SCUBA cylinders

documentation, records and reports outlining details of inspection and filling of SCUBA tank

third-party reports from a supervisor detailing performance.

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.

Guidance information for assessment

Required Skills and Knowledge

Required skills

problem-solving skills to:

conduct exterior and interior inspections of a SCUBA cylinder

determine procedures for maintenance and parameters for failure or non compliance

numeracy skills to ensure tanks are filled to correct capacity according to manufacturer's specifications and Australian Standards

literacy skills to:

access and interpret information about maintenance history, cylinder owner and inspection station details

document procedures and information relating to the completion of inspections and filling of SCUBA cylinders

planning and organising skills to:

conduct thorough external and internal inspections of SCUBA cylinders

handle and manoeuvre SCUBA cylinders safely

work through operation and maintenance procedures.

Required knowledge

legislation, organisational policies and procedures and industry technical and safety criteria to enable safe and legal conduct of inspecting and filling of SCUBA cylinders

Australian and Industry Standards related to inspecting and filling SCUBA cylinders and testing air purity to ensure risk minimisation

operation and maintenance procedures for using high pressure gas compressors

safe handling and storage of SCUBA cylinders

procedures for determining complying and non complying cylinders.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Exterior inspection may include:

attachments

compliance or non-compliance

LAB number

paint condition

approved marks

surface damage

corrosion

pass or fail.

Interior inspection may include:

valve removal

interior inspection equipment

reference documents

interior condition

cleaning

drying

recording results.

Industry technical and safety criteria may include:

British Sub-Aqua Club (BSAC)

Professional Association of Diving Instructors (PADI)

SCUBA Schools International (SSI).

Relevant legislation may include:

occupational health and safety.

Organisational policies and procedures may include:

occupational health and safety

documentation

compliance or non compliance

manufacturer's recommendations

industry criteria and standards.

Australian Standards may include:

filling SCUBA cylinders

inspecting and testing SCUBA cylinders.

Document may include:

check sheets

rule procedures

records

drawings

Quality Assurance documentation

maintenance plans, procedures and reports

scheduling documents

budgets

reports

submissions.

Operation and maintenance may include:

compressor installation

air intake

drive unit

lubricants

filter materials

run-up procedures

guarding

isolation

over-pressure devices

safety to users and members of the public.