The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare and connect the slave locomotive for operation
|
|
Personal protective clothing and equipment is selected and used Completed |
Evidence:
|
Health and safety hazards / maintenance requirements are identified and reported to appropriate personnel according to workplace reporting procedures Completed |
Evidence:
|
Workplace records are checked to confirm operational status Completed |
Evidence:
|
The remote control system is set in accordance with workplace procedures and manufacturer's specifications Completed |
Evidence:
|
Slave locomotives are prepared and required operating mode is selected Completed |
Evidence:
|
Pre-start checks are conducted Completed |
Evidence:
|
Prepare and connect the master locomotive
|
|
Confirm that system is in link mode Completed |
Evidence:
|
Check control system and conduct system self-test to confirm that the system is operating effectively Completed |
Evidence:
|
Confirm braking system is operating effectively Completed |
Evidence:
|
Total control of the system is established and confirmed Completed |
Evidence:
|
Pre-departure tests are conducted to confirm control system and locomotive equipment meets operating standard Completed |
Evidence:
|
Front and rear train consists are coupled safely to form one train Completed |
Evidence:
|
Start, operate and monitor locomotive
|
|
Master-slave locomotives are operated in accordance with workplace procedures and manufacturer's specifications to meet transport requirements Completed |
Evidence:
|
Condition of locomotive equipment is monitored to maintain optimum operating condition and identify faults or defects Completed |
Evidence:
|
Faults are assessed to determine risk of injury to personnel or damage to equipment Completed |
Evidence:
|
Corrective action is taken in accordance with workplace procedures in response to OHS hazards, abnormal or unacceptable equipment condition or performance Completed |
Evidence:
|
Emergency procedures are implemented as required according to workplace procedures and manufacturer's recommendations Completed |
Evidence:
|
Housekeeping standards are maintained Completed |
Evidence:
|
Prepare for shift handover
|
|
Workplace records are maintained in accordance with statutory requirements and workplace procedures Completed |
Evidence:
|
Handover is carried out according to workplace procedure Completed |
Evidence:
|
Changeover drivers are aware of locomotive and related equipment status, track conditions and incidents at completion of handover Completed |
Evidence:
|
Shut down locomotive
|
|
Shutdown procedures for master and slave locomotives are followed according workplace procedures Completed |
Evidence:
|
Shut down sequence is confirmed and complete and locomotives are secured in accordance with workplace procedures Completed |
Evidence:
|
Complete work
|
|
Workplace information is recorded according to workplace recording requirements Completed |
Evidence:
|
Plant and equipment are cleaned and stored/parked as required Completed |
Evidence:
|
Defects and faults are identified and reported according to workplace procedures Completed |
Evidence:
|