NTISthis.com

Evidence Guide: TDMMF2207B - MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

TDMMF2207B - MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

What evidence can you provide to prove your understanding of each of the following citeria?

Ensure application of safe operational and maintenance procedures and precautions

  1. The management of the operation and maintenance of the shipboard machinery installation is carried out in accordance with established safety procedures
  2. Precautions are taken prior to start up and operation of shipboard machinery and equipment to minimise and control hazards and operational risks in accordance with vessel and company safe working procedures, manufacturer's specifications and instructions, and established engineering practice
  3. Safe watchkeeping procedures are carried out as per vessel's classification requirements, company procedures and regulatory requirements
  4. Identified and potential operational problems with machinery are identified and investigated
  5. Appropriate action is initiated to rectify any identified operational problems with due regard to potential hazards to personal safety of crew, passengers and others on the vessel
The management of the operation and maintenance of the shipboard machinery installation is carried out in accordance with established safety procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Precautions are taken prior to start up and operation of shipboard machinery and equipment to minimise and control hazards and operational risks in accordance with vessel and company safe working procedures, manufacturer's specifications and instructions, and established engineering practice

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Safe watchkeeping procedures are carried out as per vessel's classification requirements, company procedures and regulatory requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identified and potential operational problems with machinery are identified and investigated

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate action is initiated to rectify any identified operational problems with due regard to potential hazards to personal safety of crew, passengers and others on the vessel

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

(continued)

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

2

Evidence required for demonstration of consistent performance

(continued)

1

relevant sections of international Conventions and Codes and AMSA Marine Orders

2

OH&S regulations and hazard prevention policies and procedures

3

issue resolution procedures

4

safety management system procedures and work instructions on the operation of the shipboard equipment installation typically found on a vessel of unlimited propulsion power

5

machinery security procedures

6

following on-board housekeeping processes

d

Action is taken promptly to report and/or rectify machinery malfunctions, non-conformities, accidents, hazardous occurrences and safety incidents in accordance with statutory requirements, company procedures and the ISM Code

e

Recognises and adapts appropriately to cultural differences on board vessel in behaviour and interactions among officers, crew and passengers, where relevant

f

Work is managed, controlled and completed systematically with required attention to detail

3

Context of assessment

a

Assessment of competency must comply with the assessment requirements of the relevant maritime regulations

b

Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation:

1

As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and

2

Appropriate practical assessment must occur:

i

at the registered training organisation; and/or

ii

on an appropriate working or training vessel

(continued)

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

4Specific resources required for assessment

Access is required to opportunities to:

a

participate in a range of practical and theoretical assignments, exercises, case studies and other assessments that demonstrate the skills and knowledge to ensure the application of hazard control measures and safe working regulations and procedures to ensure the safety of engine equipment, systems and services on a vessel of unlimited propulsion power; and/or

b

apply hazard control measures and safe working regulations and procedures to the efficient operation of the machinery installation on a commercial or training vessel of unlimited propulsion power

Required Skills and Knowledge

REQUIRED KNOWLEDGE

This describes the knowledge required for this unit.

1

National and international regulations, IMO Conventions and Codes, including AMSA Marine Orders applicable to the start up and shut down of main propulsion and auxiliary machinery and associated systems on vessels of unlimited propulsion power

2

Relevant OH&S legislation, policies and procedures

3

Established engineering practice for ensuring the safe and efficient operation and condition of shipboard machinery installations

4

Operational characteristics and performance specifications for the different types of machinery installation usually found on a vessel of unlimited propulsion power

5

Procedures for checking the various parts of the shipboard machinery installation to ensure compliance with the company and survey requirements and established safety rules and regulations

6

The nature and causes of typical start up and shut down malfunctions of main propulsion and auxiliary machinery and associated systems and the available methods for their detection and rectification

7

Safety, environmental and hazard control precautions and procedures relevant to the operation of shipboard machinery installation

8

Hazards and associated safety risks associated with the operation of the machinery installation on the vessel, including:

a

the range of control measures available for these safety risks

b

considerations for choosing between different control measures

c

how to identify when expert advice is needed

9

Types of operational records that must be maintained on a vessel to meet the requirements of the company, survey requirements and regulatory authorities

10

Maritime communication techniques needed during the start up and shut down of main propulsion and auxiliary machinery and associated systems

11

Purpose and content of material safety data sheets

12

Vessel and machinery specifications, machinery design drawings, machine drawings, operational manuals, specifications and electrical and control circuit diagrams

13

Safety issues, hazards and precautions associated with the operation of:

a

engines and propulsion plant

b

fuel systems

c

engine cooling and lubrication systems

d

electrical plant and distribution systems

e

marine control systems

f

auxiliary machinery and associated systems

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

14

A basic understanding of the properties, characteristics and application of materials and structures typically used in the construction of a vessel of unlimited propulsion power and its associated operational machinery and a basic knowledge of the properties and characteristics of liquids, fuels, lubricants, gases and vapours used on board vessel

15

Procedures for the testing of boiler water, machinery cooling water and lubricating oil

16

Principles and operational characteristics of power transmission systems, including gearing, chain, hydraulic and belt

17

Principles and operational characteristics of internal combustion engines, including:

a

two stroke and four stroke cycles

b

optimum combustion parameters and their control

c

diesel engine scavenging systems both in normal and emergency operation

d

atmospheric pollution caused by diesel engine combustion and ways in which it can be minimised

18

Principles of fuel systems, including:

a

typical injection pressures and viscosities for different grades of fuel

b

alterations to fuel pumps, camshafts and injectors for varying fuel types

c

differences between constant and variable injection timing of fuel

d

injection requirements for different speeds of diesel engine

e

common service faults, symptoms and causes of combustion problems and related solutions

f

fuel line pulsation damping devices and leakage protection

g

fuel valve cooling arrangements

h

uni-fuel and dual fuel systems

19

Principles of engine cooling and lubrication, including:

a

different methods of diesel engine cooling

b

need for treatment of engine cooling water

c

methods of treating engine cooling water

d

diesel engine lubrication requirements

e

methods of lubricating diesel engine components

f

theory and types of lubrication

g

relative characteristics and applications of mineral and synthetic oils

h

contaminants that may affect lubricants, their effect on machinery performance, and action that can be taken to avoid and remedy contamination of lubricants

i

common lubrication problems and their solutions

20

Principles of operation of hydraulic and electronic overspeed governors

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

21

Principles of marine control systems, including:

a

common sensors and their associated transmitters

b

analysis of control loops

c

temperature and pressure control systems used on board vessel

d

methods of load-dependent cooling of diesel alternators on heavy fuel oils

e

analysis of typical level control systems used on board vessel

f

operation and application of electronic PID controllers

22

Principles and functions of machinery space monitoring and alarm systems, including:

a

central cooling and load dependent cooling control systems

b

main engine control arrangements for fixed pitch and controllable pitch propeller systems requiring sequential control

c

alarm and monitoring systems involving data loggers, alarm loggers and trend analysis

23

Theory and preventative strategies for scavenge and uptake fires, and starting air-line, crankcase and gearbox explosions, including:

a

plans for hazard reduction

b

procedures for extinguishment of scavenge fires

c

regaining of control after starting air-line, crankcase and gearbox explosions

24

Methods of providing air for combustion

25

Principles of thermodynamics and heat and heat engines relevant to detection, identification and repair of faults, including:

a

heat transfer, including log mean temperature and circular pressure vessels

b

gases

c

gas cycles

d

properties and expansion of steam

e

steam cycles, including a specific understanding of the use of entropy charts and modifications to the steam cycle

f

boilers and evaporators

g

steam turbines, including an understanding of isentropic efficiency

h

combustion with a specific understanding of volumetric analysis

i

refrigeration and air-conditioning, including the use of entropy charts

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

REQUIRED SKILLS

This describes the basic skills required for this unit.

1

Communicate effectively with other personnel when maintaining the safety of engine equipment, systems and services

2

Read and interpret vessel and equipment specifications, equipment drawings, operational manuals, and electrical circuit diagrams

3

Read and interpret equipment performance readings and instrumentation

4

Read and interpret material safety data sheets

5

Provide leadership to other shipboard personnel on safety procedures and processes

6

Identify safety hazards related to engine equipment, systems and services and take appropriate action to minimise or eliminate them

7

Adapt to differing types of equipment and systems from one vessel to another and when equipment and systems are changed

Range Statement

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

VARIABLE

SCOPE

1. GENERAL CONTEXT

a.

Work must be carried out:

1

in compliance with mandatory rules and regulations and IMO Conventions and Codes, including the relevant sections of the AMSA Marine Orders, and ensuring that applicable codes, guidelines and standards recommended by IMO, the classification societies and maritime industry organisations are taken into account

b.

Work is performed:

1

relatively independently under broad operational requirements, with accountability for self and others in achieving the prescribed outcomes within the scope of responsibility of an Engineer Class 1

c.

Work involves:

1

the application of national and international regulations, company safety policies and procedures and established safe engineering practice to ensure the safety of engine equipment, systems and services on a vessel of unlimited propulsion power. Contribution to the development and implementation of safe working procedures, operation plans and hazard control strategies is required and accountability and responsibility for self and others in achieving the outcomes is involved

d.

Work requires:

1

significant judgement in making arrangements for the safe and efficient operation and condition of the shipboard machinery installation within the scope of responsibility of an Engineer Class 1. This includes management and control of personnel, analysis of operational hazards and safe working requirements and the checking of the condition of shipboard machinery and decision making

2. WORKSITE ENVIRONMENT

a

The machinery installation may include:

1

those typically found on an Australian or international commercial vessel of unlimited propulsion power

(continued)

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

VARIABLE

SCOPE

b

The safe and efficient operation and condition of the shipboard machinery installation must be maintained at all times, including:

1

by day or night in both normal and emergency situations

2

under any permissible conditions of weather

3

during berthing and unberthing operations

4

while anchored or moored

5

in dry dock

6

when bunkering

7

during cargo operations

c

Types of machinery encompasses all main, auxiliary and ancillary machinery and may include:

1

steam turbines, diesel, diesel electric and gas turbine propulsion systems and controls

2

steering gear, stabilisers, bow thrusters, rudders

3

fluid power systems and controls

4

deck machinery

5

pumps and pumping systems

6

auxiliary systems and controls, including

i

fresh and salt water cooling systems

ii

lubricating oil cooling systems

iii

fuel, oil, gas, coal

iv

air starting

v

lubrication

vi

bilge and ballast system, oily water separator

vii

refrigeration and air-conditioning plant and equipment

viii

on board air compressors and compressed air and control air systems

ix

waste management and pollution control systems as per the MARPOL Convention

x

evaporators

xi

inert gas generator

xii

cargo pumps, tank washing machines and associated systems

xiii

purifiers and clarifiers

xiv

heaters

xv

sewage plant

xvi

fixed firefighting installations and fire control systems

(continued)

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

VARIABLE

SCOPE

c

Types of machinery encompasses all main, auxiliary and ancillary machinery and may include:

(continued)

xvii

main and auxiliary boilers and waste heat generators

xviii

lifesaving appliances

xix

maintenance to hull and vessel side valves

xx

anchoring and mooring equipment

xi

maintenance of plant associated with the carriage of dangerous goods

d

Propulsion plant configurations may include:

1

low speed, medium and high speed diesel propulsion

2

stern tube bearing

3

CPP

4

direct drive shaft

5

diesel electric

6

steam turbine

7

gas turbine

8

reduction gears

9

thrust blocks, detuners and shaft bearings

e

Types of electrical and electronic control equipment may include:

1

programmable logic controllers (PLCs)

2

signal transmission systems used for monitoring and control

3

temperature and pressure sensors

4

electronic PID controllers

5

analogue to digital converters

6

electrical and electronic equipment space monitoring alarm and control systems

7

AC generators

8

AC and DC motors, including:

i

three phase induction motors such as squirrel cage, double cage, wound rotor and slip ring, TEFC, splash proof and submersible

ii

three phase synchronous motors

9

three phase alternators

10

three phase transformers

11

electronic instrumentation and power supply circuits

12

main switchboard and shipboard power distribution systems, including:

(continued)

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

VARIABLE

SCOPE

e

Types of electrical and electronic control equipment may include:

(continued)

i

distribution circuits and wiring

ii

protection devices

iii

circuit breakers

13

emergency supply systems, including emergency generators and battery banks

14

electronic governors

15

deck electrical machinery

f

Operational hazards may include but are not restricted to:

1

moving heavy loads in an unsafe work environment

2

unsecured machinery, components or repaired equipment

3

slippery deck

4

welding equipment

5

sharp tools and implements

6

power tools

7

moving and rotating machinery

8

flammable liquids, vapours and fuel

9

faulty machinery equipment handling equipment and lifting gear

10

using equipment beyond safe working limits

11

poor housekeeping procedures

12

non-compliance with safe working procedures

13

electrical wiring and systems

14

hot pipes and valves (steam, fuel oil, lubricating oil)

15

cold pipes and valves (refrigeration and liquefied gas cargoes)

16

working at heights

17

exposed electrical circuits

18

toxic gases and substances

19

chemicals and other harmful substances

20

damaged cargo and containers

21

noxious and dangerous cargoes

22

overspeed of electrical machinery, emergency trips

(continued)

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

VARIABLE

SCOPE

g

Documentation and records may include:

1

ISM Code safety management system plans, procedures, checklists and instructions

2

vessel's and company's safety management policies, emergency contingency plans and procedures

3

identifying records required under OH&S legislation, for example:

i

workers' compensation and rehabilitation records

ii

hazardous substances registers

iii

material safety data sheets

iv

major accident/injury notifications and

v

certificates and licences

4

manufacturer's operating and maintenance instructions and OH&S information

5

OH&S audits and inspection reports

6

maintenance and testing reports

7

workplace environmental monitoring and health surveillance records

8

records of instruction and training

9

first aid/medical post records.

h

Applicable legislation, regulations and codes may include:

1

relevant sections of national and international regulations, IMO Conventions and Codes, including AMSA Marine Orders and classification society rules dealing with OH&S in shipboard workplaces

2

relevant international, Commonwealth, State and Territory OH&S legislation, particularly:

i

OH&S legislation, regulations and codes of practice, including regulations and codes of practice relating to hazards present in the workplace or industry

ii

general duty of care under OH&S legislation and common law;

iii

requirements for the maintenance and confidentiality of records of occupational injury and disease;

iv

requirements for provision of OH&S information and training;

v

provisions relating to health and safety representatives and/or OH&S committees; and

vi

provisions relating to OH&S issue resolution.

TDMMF2207B MAINTAIN SAFETY OF ENGINE EQUIPMENT, SYSTEMS AND SERVICES ON VESSELS OF UNLIMITED PROPULSION POWER

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package.

1

Critical aspects of evidence required to demonstrate competency in this unit

Assessment must confirm appropriate knowledge and skills to:

a

Ensure the safety of engine equipment, systems and services on board a vessel

b

Ensure the safe and efficient operation and condition of shipboard machinery installation

c

Identify safety-related problems and hazards associated with the operation of the shipboard machinery installation and initiate appropriate action for their minimisation or elimination

d

Ensuring that personnel exercise all required safety, environmental and hazard control precautions and procedures when operating the shipboard machinery installation

e

Communicate effectively with others when operating the shipboard machinery installation, including use of the internal communication system

f

Ensure adherence to national and international safety regulations, IMO Conventions and Codes

2

Evidence required for demonstration of consistent performance

a

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

b

Consistently applies underpinning knowledge and skills when:

1

ensuring the safety of engine equipment, systems and services on board a vessel

2

ensuring the application of hazard control measures and safe working regulations and procedures to the efficient operation of the machinery installation

3

identifying problems and hazards and initiating appropriate action for rectification

4

communicating effectively with others during operations on the shipboard machinery installation

5

identifying and implementing safety-related improvements to operational procedures

6

completing safety-related documentation and records

c

Shows evidence of application of relevant workplace procedures, including: