NTISthis.com

Evidence Guide: TDMMR207B - USE AND MAINTAIN DECK EQUIPMENT AND MACHINERY

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

TDMMR207B - USE AND MAINTAIN DECK EQUIPMENT AND MACHINERY

What evidence can you provide to prove your understanding of each of the following citeria?

Ensure safe operation of deck machinery

  1. Operation of deck machinery is monitored to ensure compliance with manufacturer’s specifications, and instructions and safety requirements
  2. Any operational problems encountered in the use of deck machinery on the vessel are reported and/or rectified in accordance with procedures
  3. Malfunctioning equipment is identified and the nature of the fault is investigated and the outcomes reported in accordance with procedures
Operation of deck machinery is monitored to ensure compliance with manufacturer’s specifications, and instructions and safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Any operational problems encountered in the use of deck machinery on the vessel are reported and/or rectified in accordance with procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Malfunctioning equipment is identified and the nature of the fault is investigated and the outcomes reported in accordance with procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Coordinate maintenance of deck machinery

  1. Maintenance arrangements for deck machinery on the vessel are organised to fulfil survey requirements and manufacturer’s specifications
  2. Operational problems or faults with the vessel’s deck machinery are recognised and the causes identified
  3. Identified faulty deck machinery, equipment and parts are reported as required and appropriate maintenance or replacement action initiated
  4. Any restrictions to operations arising from identified malfunctions of the deck machinery are justified and reported as required
  5. Arrangements are made to carry out routine lubrication and other preventative maintenance of deck machinery in accordance with manufacturer’s instructions
  6. Faulty deck machinery, equipment and parts are identified, reported and repaired or replaced as per manufacturer’s instructions and procedures
  7. Required adjustments to the deck machinery are carried out in accordance with manufacturer’s specifications
  8. Records of all preventative and remedial maintenance carried out on deck machinery are completed in accordance with procedures
Maintenance arrangements for deck machinery on the vessel are organised to fulfil survey requirements and manufacturer’s specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operational problems or faults with the vessel’s deck machinery are recognised and the causes identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identified faulty deck machinery, equipment and parts are reported as required and appropriate maintenance or replacement action initiated

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Any restrictions to operations arising from identified malfunctions of the deck machinery are justified and reported as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Arrangements are made to carry out routine lubrication and other preventative maintenance of deck machinery in accordance with manufacturer’s instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faulty deck machinery, equipment and parts are identified, reported and repaired or replaced as per manufacturer’s instructions and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required adjustments to the deck machinery are carried out in accordance with manufacturer’s specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Records of all preventative and remedial maintenance carried out on deck machinery are completed in accordance with procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ensure that safety and hazard control procedures are applied

  1. Operation and routine maintenance of deck machinery are monitored to ensure compliance with safety regulations
  2. Safety, hazard minimisation and pollution control procedures and regulations are followed at all times
  3. Operational and maintenance hazards related to deck machinery use and
  4. maintenance are identified and action is taken to minimise or eliminate risk to personnel, vessel and the environment
  5. Action is taken in the event of failure or emergency to ensure the isolation and
  6. security of the deck machinery and maintain the safety of the vessel and personnel involved
  7. Vessel’s emergency and contingency plans are followed in the event of a failure or emergency involving deck machinery
Operation and routine maintenance of deck machinery are monitored to ensure compliance with safety regulations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety, hazard minimisation and pollution control procedures and regulations are followed at all times

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operational and maintenance hazards related to deck machinery use and

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

maintenance are identified and action is taken to minimise or eliminate risk to personnel, vessel and the environment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Action is taken in the event of failure or emergency to ensure the isolation and

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

security of the deck machinery and maintain the safety of the vessel and personnel involved

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vessel’s emergency and contingency plans are followed in the event of a failure or emergency involving deck machinery

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

TDMMR207B USE AND MAINTAIN DECK EQUIPMENT AND MACHINERY

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package.

1

Critical aspects of evidence required to demonstrate competency in this unit

Assessment must confirm appropriate knowledge and skills to:

a

Organise and coordinate the use and maintenance of deck machinery on a small commercial vessel

b

Identify problems related to the deck machinery operation and maintenance and take appropriate action in conjunction with other vessel personnel

c

Ensure the exercise of all required safety, environmental and hazard control precautions and procedures when operating deck machinery

d

Communicate effectively with others when coordinating the operation and maintenance of deck machinery

2

Evidence required for demonstration of consistent performance

a

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

b

Consistently applies underpinning knowledge and skills when:

1

coordinating the use and routine maintenance of deck machinery on a small vessel

2

identifying and investigating operational and maintenance problems and determining appropriate courses of action

3

ensuring the application of safety precautions relevant to use and maintenance of deck machinery

4

identifying and implementing improvements to routine maintenance procedures

c

Shows evidence of application of relevant workplace procedures, including:

1

relevant sections of State and Territory marine regulations, NSCV/USL Code

2

OH&S regulations, pollution control and hazard prevention policies and procedures

3

job procedures and work instructions

4

relevant deck machinery manufacturer's guidelines relating to operation routine maintenance procedures

5

environmental protection procedures when carrying out maintenance operations

2

Evidence required for demonstration of consistent performance

(continued)

d

Action is taken promptly to report and/or rectify defective or malfunctioning deck machinery in accordance with manufacturer's instructions

e

Work is completed systematically with required attention to detail

f

Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions among crew and others

3

Context of assessment

a

Assessment of competency must comply with the assessment requirements of the relevant maritime regulations

b

Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation:

1

As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and

2

Appropriate practical assessment must occur:

i

at the registered training organisation; and/or

ii

on an appropriate working or training vessel

4Specific resources required for assessment

Access is required to opportunities to:

a

participate in a range of exercises, case studies and other simulated practical and knowledge assessments that demonstrate the skills and knowledge to coordinate the use and routine maintenance of deck machinery on a small vessel; and/or

b

coordinate the use and routine maintenance of deck machinery on an operational small commercial or training vessel

Required Skills and Knowledge

REQUIRED KNOWLEDGE

This describes the knowledge required for this unit.

1

Relevant sections of State and Territory marine regulations, NSCV/USL Code

2

Relevant OH&S and pollution control legislation and policies

3

Principal operational and safety features and component parts of deck machinery used on small vessels

4

Component parts, operation and routine maintenance requirements of deck machinery and anchor equipment on a small vessel

5

Procedures for organising the operation and routine maintenance of deck machinery found on small vessels falling within the limits of responsibility of a Marine Engine Driver Grade 1

6

Procedures for checking deck machinery

7

Repair and/or replacement procedures for deck machinery and components on board small vessels

8

Information contained in vessel and machinery operational manuals and specifications.

9

Basic principles of mechanics as they relate to forces, pressures, stress and strains involved in the use of deck machinery installed on small vessels

10

Principles and procedures of machinery lubrication as they relate to deck machinery on a small vessel

11

Procedures for using hand tools for basic maintenance operations on deck machinery on small vessels

12

Maintenance and repair hazards and problems and appropriate preventative and remedial action and solutions

13

Safety, environmental and hazard control precautions and procedures relevant to the operation and routine maintenance of deck machinery on small vessels

14

Safe procedures for handling heavy items during routine maintenance of deck machinery

15

Purpose and contents of material safety data sheets

16

Maritime communication techniques needed during the use and maintenance of deck machinery on a small vessel

17

Maintenance records that must be maintained on a small commercial vessel

REQUIRED SKILLS

This describes the basic skills required for this unit.

1

Use basic verbal communication skills required when operating and maintaining deck equipment and machinery

2

Read, interpret and apply operating and service manuals and instructions for deck equipment and machinery, including all required OH&S procedures and precautions

3

Read and interpret material safety data sheets

4

Read and interpret machinery performance readings and indications

5

Complete any required operational and maintenance records

6

Work safely and collaboratively with others when operating and maintaining deck equipment and machinery

7

Select and use relevant tools and equipment as per instructions

8

Recognise faulty equipment and take appropriate action as per operating instructions

9

Recognise routine problems when operating deck equipment and machinery and take appropriate action

10

Adapt to differences in vessels, deck equipment and machinery and operating and servicing procedures

11

Operate deck equipment and machinery on vessels of less than 1,500 kW propulsion power

Range Statement

TDMMR207B USE AND MAINTAIN DECK EQUIPMENT AND MACHINERY

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

VARIABLE

SCOPE

1. GENERAL CONTEXT

a.

Work must be carried out:

1

relevant sections of State and Territory marine regulations, NSCV/USL Code

b.

Work is performed:

1

within broad operational requirements, with responsibility for own outputs in relation to specified quality standards and limited responsibility for others in achieving the specified quality and quantity of outcomes

c.

Work involves:

1

the organisation of the use and basic maintenance of deck machinery on a vessel and the application of solutions to a defined range of maintenance problems

2. WORKSITE ENVIRONMENT

a

Vessel may include:

1

any commercial vessel up to 750kW propulsion power (and up to 1,500kW in restricted offshore operations)

b

Operation and maintenance of the deck machinery may be carried out:

1

by day or night in both normal and emergency situations

2

under any permissible conditions of weather

3

while underway

4

when berthed or moored

5

when slipped or in dry dock

c

Maintenance may include:

1

routine visual and performance checks

2

identification of any faults or operational problems

3

identification of damaged or worn equipment or fittings and arranging for repair or replacement

4

application of lubricants to moving parts of deck machinery

(continued)

TDMMR207B USE AND MAINTAIN DECK EQUIPMENT AND MACHINERY

VARIABLE

SCOPE

d

Deck machinery may include but is not limited to:

1

winches

2

windlasses

3

small cranes, derricks and booms

4

safeguards and protective devices for winches

5

lifting equipment

6

fishing gear

7

basic hydraulic systems

e

Maintenance tools and equipment may include:

1

hand and power tools

2

greasing and lubrication tools

3

protective clothing and equipment such as:

i

eye and ear protection

ii

safety boots and helmet

iii

dust and fume masks

f

Operational, maintenance and repair hazards may include:

1

moving heavy loads using unsafe lifting procedures

2

unsecured machinery, components or repair equipment

3

slippery deck and vessel movement in a seaway

4

sharp tools and implements

5

rolling vessel

6

poor weather

7

poor visibility

8

power tools

9

moving and rotating machinery

10

faulty machinery equipment handling equipment and lifting gear

11

using equipment beyond safe working limits

12

poor housekeeping procedures

13

non-compliance with safe working procedures

(continued)

TDMMR207B USE AND MAINTAIN DECK EQUIPMENT AND MACHINERY

VARIABLE

SCOPE

g

Documentation and records

may include:

1

maintenance and repair procedures and instructions

2

relevant sections of State and Territory marine regulations, NSCV/USL Code related to small vessel maintenance

3

company and vessel operational and maintenance procedures for deck machinery

4

maintenance records

5

deck machinery manufacturer's instructions, specifications and recommended procedures

6

instructions of relevant maritime authorities related to the maintenance of vessels

7

relevant Australian standards

h

Applicable legislation, regulations and codes may include:

1

relevant sections of State and Territory marine regulations, NSCV/USL Code

2

relevant Commonwealth, State and Territory OH&S and pollution control legislation

3

relevant international and Australian standards