NTISthis.com

Evidence Guide: TDTC397B - Drive medium rigid vehicle

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

TDTC397B - Drive medium rigid vehicle

What evidence can you provide to prove your understanding of each of the following citeria?

Drive the medium rigid vehicle

  1. The medium rigid vehicle is started, steered, manoeuvred, positioned and stopped in accordance with traffic regulations and manufacturer's instructions
  2. Engine power is managed to ensure efficiency and performance and to minimise engine and transmission damage
  3. Engine operation is maintained within manufacturer's specified torque range and temperature through effective transmission use
  4. Braking system of medium rigid vehicle is managed and operated to ensure effective control of the vehicle under all conditions
  5. Driving hazards are identified and/or anticipated and avoided or controlled through defensive driving
  6. The medium rigid vehicle is driven in reverse, maintaining visibility and achieving accurate positioning
  7. The medium rigid vehicle is parked, shut down and secured in accordance with manufacturer's specifications, traffic regulations and workplace procedures
  8. Appropriate procedures are followed in the event of a driving emergency
The medium rigid vehicle is started, steered, manoeuvred, positioned and stopped in accordance with traffic regulations and manufacturer's instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Engine power is managed to ensure efficiency and performance and to minimise engine and transmission damage

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Engine operation is maintained within manufacturer's specified torque range and temperature through effective transmission use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Braking system of medium rigid vehicle is managed and operated to ensure effective control of the vehicle under all conditions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Driving hazards are identified and/or anticipated and avoided or controlled through defensive driving

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The medium rigid vehicle is driven in reverse, maintaining visibility and achieving accurate positioning

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The medium rigid vehicle is parked, shut down and secured in accordance with manufacturer's specifications, traffic regulations and workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate procedures are followed in the event of a driving emergency

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Monitor traffic and road conditions

  1. The most efficient route of travel is taken through monitoring and anticipation of traffic flows and conditions, road standards and other factors likely to cause delays or route deviations
  2. Traffic and road conditions are constantly monitored and acted upon to enable safe operation and to ensure no injury to people or damage to property, equipment, loads and facilities
The most efficient route of travel is taken through monitoring and anticipation of traffic flows and conditions, road standards and other factors likely to cause delays or route deviations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Traffic and road conditions are constantly monitored and acted upon to enable safe operation and to ensure no injury to people or damage to property, equipment, loads and facilities

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Monitor and maintain vehicle performance

  1. Vehicle performance is maintained through pre-operational inspections and checks of the vehicle
  2. Performance and efficiency of vehicle operation is monitored during use
  3. Defective or irregular performance or malfunctions are reported to the appropriate authority
  4. Vehicle records are maintained/updated and information is processed in accordance with workplace procedures
Vehicle performance is maintained through pre-operational inspections and checks of the vehicle

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Performance and efficiency of vehicle operation is monitored during use

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Defective or irregular performance or malfunctions are reported to the appropriate authority

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Vehicle records are maintained/updated and information is processed in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Critical aspects of evidence to be considered

a. Assessment must confirm appropriate knowledge and skills to:

a.1. follow correct medium rigid vehicle handling procedures

a.2. monitor traffic and road conditions

a.3. carry out pre-operational checks

a.4. monitor and maintain vehicle performance

a.5. follow OHS and environmental protection procedures and regulations

a.6. follow emergency procedures when required

Interdependent assessment of units

a. This unit of competency may be assessed in conjunction with other relevant competency units that form part of a transport worker's job function

Required knowledge and skills

a. Relevant road rules, regulations, permit and licence requirements of the relevant State/Territory road traffic authority

b. Relevant OHS and environmental procedures and regulations

c. Medium rigid vehicle controls, instruments and indicators and their use

d. Medium rigid vehicle handling procedures

e. Procedures to be followed in the event of a driving emergency

f. Engine power management and safe driving strategies

g. Efficient driving techniques

h. Pre-operational checks carried out on vehicle and related action

i. Differences between transmission types

j. Principles of operation of air brakes and procedures for their use

k. Fatigue management techniques

l. Driving hazards and related defensive driving techniques

m. Principles of stress management when driving a vehicle

n. Factors which may cause traffic delays and diversions and related action that can be taken by a driver

o. Workplace driving and operational instructions

p. Causes and effects of fatigue on drivers

q. Strategies to manage on-road fatigue

r. Factors which increase fatigue-related accidents

s. Lifestyles which promote the effective long-term management of fatigue

t. Ability to read instructions, procedures and signage relevant to the driving of a medium rigid vehicle

u. Map reading and road navigation techniques

v. Ability to monitor and anticipate traffic hazards and take appropriate action

Resource implications

a. Access is required to opportunities to:

a.1. participate in a range of exercises, case studies and other real and simulated practical and knowledge assessments that demonstrate the skills and knowledge to drive a commercial medium rigid vehicle equal to or less than 4.5 tonnes GVM and seating up to 12 adults (including the driver and all types of transmission), and/or

a.2. drive such a commercial medium rigid vehicle in an appropriate range of operational situations

Consistency in performance

a. Applies underpinning knowledge and skills when:

a.1. driving a medium rigid vehicle

a.2. monitoring traffic and road conditions and taking appropriate action

a.3. carrying out pre-operational checks and taking appropriate action

a.4. monitoring and maintaining vehicle performance

a.5. exercising all required safety, environmental and hazard control precautions and procedures during driving operations

a.6. communicating effectively with others when driving a vehicle

a.7. completing required documentation

b. Shows evidence of application of relevant workplace procedures including:

b.1. relevant State/Territory roads and traffic authority driving regulations and licence requirements pertaining to medium rigid vehicles

b.2. OHS policies and procedures

b.3. identification of driving hazards and the use of appropriate defensive driving techniques

b.4. workplace procedures and instructions (including security and housekeeping procedures)

b.5. relevant vehicle manufacturer's guidelines related to the driving of the vehicle

b.6. environmental protection procedures when driving a vehicle and carrying out pre-operational checks

c. Action is taken promptly to report and/or rectify any identified vehicle faults or malfunctions in accordance with manufacturer's instructions, road traffic authority requirements and workplace procedures

d. Performance is demonstrated consistently over a period of time and in a suitable range of contexts

e. Work is completed systematically with required attention to detail and without injury to self or others or damage to goods or equipment

Context for assessment

a. Assessment of competence must comply with the assessment requirements of the relevant State/Territory road traffic authority

b. Assessment of this unit must be undertaken by a Registered Training Organisation:

b.1. As a minimum, assessment of knowledge must be conducted through appropriate oral and/or written questioning

b.2. Appropriate practical assessment must occur:

b.2.1.at the Registered Training Organisation, and/or

b.2.2.in an appropriate work situation

Critical aspects of evidence to be considered

a. Assessment must confirm appropriate knowledge and skills to:

a.1. follow correct medium rigid vehicle handling procedures

a.2. monitor traffic and road conditions

a.3. carry out pre-operational checks

a.4. monitor and maintain vehicle performance

a.5. follow OHS and environmental protection procedures and regulations

a.6. follow emergency procedures when required

Interdependent assessment of units

a. This unit of competency may be assessed in conjunction with other relevant competency units that form part of a transport worker's job function

Required knowledge and skills

a. Relevant road rules, regulations, permit and licence requirements of the relevant State/Territory road traffic authority

b. Relevant OHS and environmental procedures and regulations

c. Medium rigid vehicle controls, instruments and indicators and their use

d. Medium rigid vehicle handling procedures

e. Procedures to be followed in the event of a driving emergency

f. Engine power management and safe driving strategies

g. Efficient driving techniques

h. Pre-operational checks carried out on vehicle and related action

i. Differences between transmission types

j. Principles of operation of air brakes and procedures for their use

k. Fatigue management techniques

l. Driving hazards and related defensive driving techniques

m. Principles of stress management when driving a vehicle

n. Factors which may cause traffic delays and diversions and related action that can be taken by a driver

o. Workplace driving and operational instructions

p. Causes and effects of fatigue on drivers

q. Strategies to manage on-road fatigue

r. Factors which increase fatigue-related accidents

s. Lifestyles which promote the effective long-term management of fatigue

t. Ability to read instructions, procedures and signage relevant to the driving of a medium rigid vehicle

u. Map reading and road navigation techniques

v. Ability to monitor and anticipate traffic hazards and take appropriate action

Resource implications

a. Access is required to opportunities to:

a.1. participate in a range of exercises, case studies and other real and simulated practical and knowledge assessments that demonstrate the skills and knowledge to drive a commercial medium rigid vehicle equal to or less than 4.5 tonnes GVM and seating up to 12 adults (including the driver and all types of transmission), and/or

a.2. drive such a commercial medium rigid vehicle in an appropriate range of operational situations

Consistency in performance

a. Applies underpinning knowledge and skills when:

a.1. driving a medium rigid vehicle

a.2. monitoring traffic and road conditions and taking appropriate action

a.3. carrying out pre-operational checks and taking appropriate action

a.4. monitoring and maintaining vehicle performance

a.5. exercising all required safety, environmental and hazard control precautions and procedures during driving operations

a.6. communicating effectively with others when driving a vehicle

a.7. completing required documentation

b. Shows evidence of application of relevant workplace procedures including:

b.1. relevant State/Territory roads and traffic authority driving regulations and licence requirements pertaining to medium rigid vehicles

b.2. OHS policies and procedures

b.3. identification of driving hazards and the use of appropriate defensive driving techniques

b.4. workplace procedures and instructions (including security and housekeeping procedures)

b.5. relevant vehicle manufacturer's guidelines related to the driving of the vehicle

b.6. environmental protection procedures when driving a vehicle and carrying out pre-operational checks

c. Action is taken promptly to report and/or rectify any identified vehicle faults or malfunctions in accordance with manufacturer's instructions, road traffic authority requirements and workplace procedures

d. Performance is demonstrated consistently over a period of time and in a suitable range of contexts

e. Work is completed systematically with required attention to detail and without injury to self or others or damage to goods or equipment

Context for assessment

a. Assessment of competence must comply with the assessment requirements of the relevant State/Territory road traffic authority

b. Assessment of this unit must be undertaken by a Registered Training Organisation:

b.1. As a minimum, assessment of knowledge must be conducted through appropriate oral and/or written questioning

b.2. Appropriate practical assessment must occur:

b.2.1.at the Registered Training Organisation, and/or

b.2.2.in an appropriate work situation

Required Skills and Knowledge

Not applicable.

Range Statement

General context

a. Driving must be carried out in compliance with the licence requirements and regulations of the relevant State/Territory roads and traffic authority pertaining to medium rigid vehicles

b. Driving is performed with limited or minimum supervision, with limited accountability and responsibility for self and others in achieving the prescribed outcomes

c. Driving involves the application of routine vehicle driving principles and procedures to maintain the safety and operation of a commercial medium rigid vehicle across a variety of driving contexts

Worksite environment

a. Type of vehicle includes all medium rigid vehicles, for example any 2-axle rigid vehicle, including truck and bus greater than 8 tonnes GVM.

b. Driving may be carried out in typical road transport situations, including:

b.1. operations conducted at day or night

b.2. typical weather conditions

b.3. on the open road

b.4. on a private road

b.5. while at a depot, base or warehouse

b.6. while at a client's workplace or work site

c. Vehicle handling procedures may include:

c.1. starting a vehicle

c.2. steering and manoeuvring a vehicle

c.3. accelerating and braking

c.4. positioning and stopping a vehicle

c.5. reversing a vehicle

c.6. operating vehicle controls, instruments and indicators

c.7. using air brakes

c.8. using defensive driving techniques

c.9. managing engine performance

d. Pre-operational checks may include:

d.1. visual check of vehicle

d.2. checking and topping up of fluid levels

d.3. checks of tyre pressures

d.4. checks of operation of vehicle lights and indicators

d.5. checks of brakes

e. Minor routine repairs may include:

e.1. replacement of blown globes in vehicle lights

e.2. replacement of broken fan belt

e.3. replacement of blown fuse

e.4. replacement of door mirrors

e.5. repairs to rear tail-light lens

e.6. changing of tyres

e.7. repair of tyre punctures

e.8. replacement of broken coolant hose

f. Driving hazards may include (examples only):

f.1. wet and iced roads

f.2. oil on road

f.3. animals and objects on road

f.4. fire in vehicle

f.5. leaking fuel

f.6. faulty brakes

f.7. parked vehicles on the road

f.8. faulty steering mechanism on vehicle

f.9. pedestrians crossing the road

f.10. flooded sections of road

f.11. windy sections of road

f.12. foggy conditions

g. Factors that can cause traffic delays and diversions may include:

g.1. traffic accidents

g.2. flooded sections of road

g.3. road damage

g.4. bridge/tunnel damage

g.5. road works

g.6. building construction

g.7. emergency situations such as bushfires, building fires, etc.

g.8. road closures for special events such as marches, parades, etc.

g.9. holiday traffic

g.10.road closures for utility works such as electricity, water, sewerage, telecommunications, gas, etc.

h. Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:

h.1. company procedures

h.2. enterprise procedures

h.3. organisational procedures

h.4. established procedures

Sources of information/documents

a. Documentation/records may include:

a.1. State/Territory medium rigid vehicle driving licence requirements

a.2. State/Territory road rules

a.3. workplace driving instructions and procedures

a.4. vehicle manufacturer's instructions, specifications and recommended driving procedures including preoperational checks of vehicle

a.5. emergency procedures

a.6. vehicle log book or record book (where required)

Applicable regulations and legislation

a. Applicable procedures and codes may include:

a.1. relevant State/Territory roads and traffic authority driving regulations and licence requirements pertaining to medium rigid vehicles

a.2. relevant State/Territory road rules

a.3. relevant State/Territory permit regulations and requirements

a.4. relevant State/Territory OHS legislation

a.5. relevant State/Territory fatigue management regulations

a.6. relevant State/Territory environmental protection legislation

General context

a. Driving must be carried out in compliance with the licence requirements and regulations of the relevant State/Territory roads and traffic authority pertaining to medium rigid vehicles

b. Driving is performed with limited or minimum supervision, with limited accountability and responsibility for self and others in achieving the prescribed outcomes

c. Driving involves the application of routine vehicle driving principles and procedures to maintain the safety and operation of a commercial medium rigid vehicle across a variety of driving contexts

Worksite environment

a. Type of vehicle includes all medium rigid vehicles, for example any 2-axle rigid vehicle, including truck and bus greater than 8 tonnes GVM.

b. Driving may be carried out in typical road transport situations, including:

b.1. operations conducted at day or night

b.2. typical weather conditions

b.3. on the open road

b.4. on a private road

b.5. while at a depot, base or warehouse

b.6. while at a client's workplace or work site

c. Vehicle handling procedures may include:

c.1. starting a vehicle

c.2. steering and manoeuvring a vehicle

c.3. accelerating and braking

c.4. positioning and stopping a vehicle

c.5. reversing a vehicle

c.6. operating vehicle controls, instruments and indicators

c.7. using air brakes

c.8. using defensive driving techniques

c.9. managing engine performance

d. Pre-operational checks may include:

d.1. visual check of vehicle

d.2. checking and topping up of fluid levels

d.3. checks of tyre pressures

d.4. checks of operation of vehicle lights and indicators

d.5. checks of brakes

e. Minor routine repairs may include:

e.1. replacement of blown globes in vehicle lights

e.2. replacement of broken fan belt

e.3. replacement of blown fuse

e.4. replacement of door mirrors

e.5. repairs to rear tail-light lens

e.6. changing of tyres

e.7. repair of tyre punctures

e.8. replacement of broken coolant hose

f. Driving hazards may include (examples only):

f.1. wet and iced roads

f.2. oil on road

f.3. animals and objects on road

f.4. fire in vehicle

f.5. leaking fuel

f.6. faulty brakes

f.7. parked vehicles on the road

f.8. faulty steering mechanism on vehicle

f.9. pedestrians crossing the road

f.10. flooded sections of road

f.11. windy sections of road

f.12. foggy conditions

g. Factors that can cause traffic delays and diversions may include:

g.1. traffic accidents

g.2. flooded sections of road

g.3. road damage

g.4. bridge/tunnel damage

g.5. road works

g.6. building construction

g.7. emergency situations such as bushfires, building fires, etc.

g.8. road closures for special events such as marches, parades, etc.

g.9. holiday traffic

g.10.road closures for utility works such as electricity, water, sewerage, telecommunications, gas, etc.

h. Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:

h.1. company procedures

h.2. enterprise procedures

h.3. organisational procedures

h.4. established procedures

Sources of information/documents

a. Documentation/records may include:

a.1. State/Territory medium rigid vehicle driving licence requirements

a.2. State/Territory road rules

a.3. workplace driving instructions and procedures

a.4. vehicle manufacturer's instructions, specifications and recommended driving procedures including preoperational checks of vehicle

a.5. emergency procedures

a.6. vehicle log book or record book (where required)

Applicable regulations and legislation

a. Applicable procedures and codes may include:

a.1. relevant State/Territory roads and traffic authority driving regulations and licence requirements pertaining to medium rigid vehicles

a.2. relevant State/Territory road rules

a.3. relevant State/Territory permit regulations and requirements

a.4. relevant State/Territory OHS legislation

a.5. relevant State/Territory fatigue management regulations

a.6. relevant State/Territory environmental protection legislation