The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Obtain and confirm job instructions/work specifications
|
|
Job instructions are obtained and checked to ensure specifications include all necessary information Completed |
Evidence:
|
Lift plan and other work specifications are interpreted and clarification sought if necessary Completed |
Evidence:
|
Coordinate loading of gear and equipment
|
|
Specific gear necessary for job is identified and obtained Completed |
Evidence:
|
Equipment is properly packed and secured according to company procedures to ensure injury and damage are avoided during transportation Completed |
Evidence:
|
Assess job requirements and work area
|
|
Adequate site access and egress is identified Completed |
Evidence:
|
Potential hazards are identified and appropriate elimination or control measures selected Completed |
Evidence:
|
Weight and dimensions of load are estimated or confirmed in consultation with customer and relevant personnel to ensure job is within limits of crane capacity Completed |
Evidence:
|
Site information is interpreted and requirements confirmed with site supervisor Completed |
Evidence:
|
Area is assessed to ensure there is sufficient space to establish crane and conduct lift Completed |
Evidence:
|
Need to move mobile crane is assessed and, where applicable, route to be travelled is planned to ensure crane traverses firm surfaces and slopes are avoided where possible Completed |
Evidence:
|
Any concerns about the safety or feasibility of the lift are discussed with the customer and if not resolved, reported to supervisor Completed |
Evidence:
|
Payment arrangements are confirmed with customer where required Completed |
Evidence:
|
Customer requirements are anticipated and suggestions made which will maximise safety and efficiency and minimise inconvenience Completed |
Evidence:
|
Design job plan
|
|
The job plan is developed to include hazard prevention/control measures and safety procedures in line with applicable Australian Standards, codes of practice and equipment manufacturers specifications Completed |
Evidence:
|
Cranes load chart is consulted and information on permissible loads, radii, weights, boom and jib configurations taken into account in planning the job Completed |
Evidence:
|
The job plan takes into account job requirements and customer priorities, and workplace rules and procedures Completed |
Evidence:
|
Job plan is discussed and confirmed with relevant personnel Completed |
Evidence:
|
Job plan details are documented as required Completed |
Evidence:
|
Set up work area
|
|
Site personnel and public are advised of any danger and site/work area is isolated as necessary in line with legislative, regulatory and customer requirements Completed |
Evidence:
|
Site safety procedures are followed Completed |
Evidence:
|
Required protective equipment is identified and fitted in accordance with manufacturers guidelines and customer requirements Completed |
Evidence:
|
Ancillary equipment is assembled and erected where appropriate Completed |
Evidence:
|
Load destination and travel route where applicable are prepared to accept load Completed |
Evidence:
|