NTISthis.com

Evidence Guide: TLIC1013 - Ride courier/delivery bicycle

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

TLIC1013 - Ride courier/delivery bicycle

What evidence can you provide to prove your understanding of each of the following citeria?

Inspect bicycle for operational capability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is checked to ensure operational checks of bicycle may be conducted safely

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bicycle is checked prior to operation to ensure it is free from damage that may limit operational capability, in accordance with manufacturer safety checks, specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Component operation is tested in accordance with manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Warning systems are checked for operational effectiveness

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Air pressure and lubrication are checked against specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate products are used to maintain specified levels as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults are identified and assessments are made of their potential affect on the operation of the bicycle for the required work, and are reported to appropriate personnel for rectification

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Personal protective equipment is identified, worn and adjusted to meet recommended Australian Standards, legislative, regulatory and policy requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ride bicycle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Road area is checked for hazards prior to and during journey

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bicycle is steered, manoeuvred, positioned and stopped in accordance with traffic regulations, manufacturer instructions and workplace policy

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Gears are managed to ensure efficiency and performance, and to minimise gear damage and fatigue

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards are identified and/or anticipated and avoided or controlled through defensive riding

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bicycle is parked and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bicycle is securely loaded and manoeuvred in accordance with required precautions related to characteristics of the load and/or relevant government regulations pertaining to special loads

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required signs or indicators are fixed to the bicycle

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor traffic and road conditions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Most efficient route of travel is taken through monitoring and anticipating traffic flows and conditions, road standards and other factors likely to cause delays or route deviations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Traffic and road conditions are constantly monitored and acted upon to enable safe operation and to ensure no injury to people or damage to property, equipment, loads and facilities

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor and maintain bicycle performance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Performance of bicycle operation is monitored during use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Defective or irregular performance or malfunctions are reported to appropriate authority

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Records are maintained/updated and information is processed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clear reference in reports is made to items that may affect future efficient use and/or safety of equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Inspect bicycle for operational capability

1.1

Work area is checked to ensure operational checks of bicycle may be conducted safely

1.2

Bicycle is checked prior to operation to ensure it is free from damage that may limit operational capability, in accordance with manufacturer safety checks, specifications and workplace procedures

1.3

Component operation is tested in accordance with manufacturer specifications and workplace procedures

1.4

Warning systems are checked for operational effectiveness

1.5

Air pressure and lubrication are checked against specifications

1.6

Appropriate products are used to maintain specified levels as required

1.7

Faults are identified and assessments are made of their potential affect on the operation of the bicycle for the required work, and are reported to appropriate personnel for rectification

1.8

Personal protective equipment is identified, worn and adjusted to meet recommended Australian Standards, legislative, regulatory and policy requirements

2

Ride bicycle

2.1

Road area is checked for hazards prior to and during journey

2.2

Bicycle is steered, manoeuvred, positioned and stopped in accordance with traffic regulations, manufacturer instructions and workplace policy

2.3

Gears are managed to ensure efficiency and performance, and to minimise gear damage and fatigue

2.4

Hazards are identified and/or anticipated and avoided or controlled through defensive riding

2.5

Bicycle is parked and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures

2.6

Bicycle is securely loaded and manoeuvred in accordance with required precautions related to characteristics of the load and/or relevant government regulations pertaining to special loads

2.7

Required signs or indicators are fixed to the bicycle

3

Monitor traffic and road conditions

3.1

Most efficient route of travel is taken through monitoring and anticipating traffic flows and conditions, road standards and other factors likely to cause delays or route deviations

3.2

Traffic and road conditions are constantly monitored and acted upon to enable safe operation and to ensure no injury to people or damage to property, equipment, loads and facilities

4

Monitor and maintain bicycle performance

4.1

Performance of bicycle operation is monitored during use

4.2

Defective or irregular performance or malfunctions are reported to appropriate authority

4.3

Records are maintained/updated and information is processed in accordance with workplace procedures

4.4

Clear reference in reports is made to items that may affect future efficient use and/or safety of equipment

Required Skills and Knowledge

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Inspect bicycle for operational capability

1.1

Work area is checked to ensure operational checks of bicycle may be conducted safely

1.2

Bicycle is checked prior to operation to ensure it is free from damage that may limit operational capability, in accordance with manufacturer safety checks, specifications and workplace procedures

1.3

Component operation is tested in accordance with manufacturer specifications and workplace procedures

1.4

Warning systems are checked for operational effectiveness

1.5

Air pressure and lubrication are checked against specifications

1.6

Appropriate products are used to maintain specified levels as required

1.7

Faults are identified and assessments are made of their potential affect on the operation of the bicycle for the required work, and are reported to appropriate personnel for rectification

1.8

Personal protective equipment is identified, worn and adjusted to meet recommended Australian Standards, legislative, regulatory and policy requirements

2

Ride bicycle

2.1

Road area is checked for hazards prior to and during journey

2.2

Bicycle is steered, manoeuvred, positioned and stopped in accordance with traffic regulations, manufacturer instructions and workplace policy

2.3

Gears are managed to ensure efficiency and performance, and to minimise gear damage and fatigue

2.4

Hazards are identified and/or anticipated and avoided or controlled through defensive riding

2.5

Bicycle is parked and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures

2.6

Bicycle is securely loaded and manoeuvred in accordance with required precautions related to characteristics of the load and/or relevant government regulations pertaining to special loads

2.7

Required signs or indicators are fixed to the bicycle

3

Monitor traffic and road conditions

3.1

Most efficient route of travel is taken through monitoring and anticipating traffic flows and conditions, road standards and other factors likely to cause delays or route deviations

3.2

Traffic and road conditions are constantly monitored and acted upon to enable safe operation and to ensure no injury to people or damage to property, equipment, loads and facilities

4

Monitor and maintain bicycle performance

4.1

Performance of bicycle operation is monitored during use

4.2

Defective or irregular performance or malfunctions are reported to appropriate authority

4.3

Records are maintained/updated and information is processed in accordance with workplace procedures

4.4

Clear reference in reports is made to items that may affect future efficient use and/or safety of equipment

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant legislation and workplace procedures

controlling all functions of the courier delivery bicycle

completing relevant documentation

monitoring bicycle and equipment performance and taking appropriate action as required

reading and interpreting relevant instructions, procedures, information and signs

reporting and/or rectifying identified problems that may arise, in accordance with regulatory requirements and workplace procedures.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

bicycle handling procedures

cycling hazards and related defensive riding techniques

emergency procedures

factors that may cause traffic delays and diversions, and related action that can be taken by a courier or delivery cyclist

map reading and road navigation techniques

pre-operational checks carried out on bicycle and related action

procedures and policies identifying, accepting and carrying of dangerous/hazardous goods

relevant state/territory road traffic authority road rules, regulations, permit and licence requirements

relevant work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations

requirements of courier or delivery work systems/operations and relevant equipment

workplace operational instructions.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.