The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for shunting operation |
|
Completed |
Evidence:
|
Shunting requirements are interpreted and clarified, and vehicles and equipment are obtained and prepared in accordance with shunting strategy |
|
Completed |
Evidence:
|
Rolling stock movements, availability and locations are established to determine appropriate siding and/or track locations for vehicle placement |
|
Completed |
Evidence:
|
Relevant work health and safety (WHS)/occupational health and safety (OHS) legislation, codes of practice, organisational policies and procedures, and safeworking systems and requirements related to shunting are identified |
|
Completed |
Evidence:
|
Carry out shunting control procedures |
|
Completed |
Evidence:
|
Points, levers, switches, signals and line of sight communications are used to assist the control of rolling stock movement |
|
Completed |
Evidence:
|
Uniform hand signals, light and radio shunting commands that conform with operational rules and statutory requirements are used |
|
Completed |
Evidence:
|
Relevant WHS/OHS requirements are followed to prevent injury and damage |
|
Completed |
Evidence:
|
Wagon cards are checked and wagons are obtained and sorted to comply with shunting requirements |
|
Completed |
Evidence:
|
Shunting control techniques are applied to prevent damage of rolling stock and loads/contents |
|
Completed |
Evidence:
|
Shunt rolling stock |
|
Completed |
Evidence:
|
Workplace procedures for shunting are identified and applied |
|
Completed |
Evidence:
|
Rolling stock is positioned to meet shunting requirements |
|
Completed |
Evidence:
|
Coupling systems are identified and applied to attach and detach rolling stock |
|
Completed |
Evidence:
|
Connecting brake hoses, electrical couplings and hand brakes are connected/disconnected and applied/released in accordance with operational and WHS/OHS requirements |
|
Completed |
Evidence:
|
Rolling stock is shunted with the minimum of necessary moves within governing safety requirements and limitations |
|
Completed |
Evidence:
|
Finalise train consist |
|
Completed |
Evidence:
|
Train consists are made up in accordance with operational procedures and timetabling requirements |
|
Completed |
Evidence:
|
Irregularities and defects with rolling stock equipment are reported in accordance with operational requirements |
|
Completed |
Evidence:
|