NTISthis.com

Evidence Guide: TLIC3071 - Operate an agitator

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

TLIC3071 - Operate an agitator

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare vehicle

  1. Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards
  2. Pre-operational agitator check is completed in accordance with workplace procedures
  3. Concrete is charged to agitator and slump is adjusted in accordance with customer requirements and organisational procedures
  4. Vehicle exterior is cleaned in accordance with organisational policy and regulatory requirements
  5. Most efficient route of travel is determined to achieve customer and regulatory requirements
  6. Traffic and road conditions are constantly monitored and acted on to enable safe operation
  7. Emergency procedures are followed in a driving emergency
Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pre-operational agitator check is completed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Concrete is charged to agitator and slump is adjusted in accordance with customer requirements and organisational procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle exterior is cleaned in accordance with organisational policy and regulatory requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Most efficient route of travel is determined to achieve customer and regulatory requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Traffic and road conditions are constantly monitored and acted on to enable safe operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Emergency procedures are followed in a driving emergency

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor and maintain vehicle performance

  1. Performance position and efficiency of vehicle operation are monitored during use
  2. Defective or irregular performance and malfunctions are reported to appropriate authority
  3. Vehicle records are updated and maintained, and information is processed in accordance with workplace procedures
Performance position and efficiency of vehicle operation are monitored during use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Defective or irregular performance and malfunctions are reported to appropriate authority

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle records are updated and maintained, and information is processed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Deliver concrete to site

  1. Pre-site check is completed before entry onto worksite in accordance with regulatory and workplace requirements
  2. Personal protective equipment (PPE) is worn in accordance with workplace policy
  3. Vehicle is parked and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures
  4. Ancillary equipment is attached and operated in accordance with workplace procedures and regulatory requirements
  5. Concrete is discharged in accordance with customer requirements, and workplace policy and procedure
Pre-site check is completed before entry onto worksite in accordance with regulatory and workplace requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Personal protective equipment (PPE) is worn in accordance with workplace policy

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is parked and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ancillary equipment is attached and operated in accordance with workplace procedures and regulatory requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Concrete is discharged in accordance with customer requirements, and workplace policy and procedure

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finalise concrete delivery

  1. Relevant documentation is completed on delivery of concrete, in accordance with customer requirements and workplace policy and procedure
  2. Vehicle is cleaned in accordance with organisational policy and regulatory requirements
Relevant documentation is completed on delivery of concrete, in accordance with customer requirements and workplace policy and procedure

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Vehicle is cleaned in accordance with organisational policy and regulatory requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare vehicle

1.1

Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards

1.2

Pre-operational agitator check is completed in accordance with workplace procedures

1.3

Concrete is charged to agitator and slump is adjusted in accordance with customer requirements and organisational procedures

1.4

Vehicle exterior is cleaned in accordance with organisational policy and regulatory requirements

1.5

Most efficient route of travel is determined to achieve customer and regulatory requirements

1.6

Traffic and road conditions are constantly monitored and acted on to enable safe operation

1.7

Emergency procedures are followed in a driving emergency

2

Monitor and maintain vehicle performance

2.1

Performance position and efficiency of vehicle operation are monitored during use

2.2

Defective or irregular performance and malfunctions are reported to appropriate authority

2.3

Vehicle records are updated and maintained, and information is processed in accordance with workplace procedures

3

Deliver concrete to site

3.1

Pre-site check is completed before entry onto worksite in accordance with regulatory and workplace requirements

3.2

Personal protective equipment (PPE) is worn in accordance with workplace policy

3.3

Vehicle is parked and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures

3.4

Ancillary equipment is attached and operated in accordance with workplace procedures and regulatory requirements

3.5

Concrete is discharged in accordance with customer requirements, and workplace policy and procedure

4

Finalise concrete delivery

4.1

Relevant documentation is completed on delivery of concrete, in accordance with customer requirements and workplace policy and procedure

4.2

Vehicle is cleaned in accordance with organisational policy and regulatory requirements

Required Skills and Knowledge

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare vehicle

1.1

Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards

1.2

Pre-operational agitator check is completed in accordance with workplace procedures

1.3

Concrete is charged to agitator and slump is adjusted in accordance with customer requirements and organisational procedures

1.4

Vehicle exterior is cleaned in accordance with organisational policy and regulatory requirements

1.5

Most efficient route of travel is determined to achieve customer and regulatory requirements

1.6

Traffic and road conditions are constantly monitored and acted on to enable safe operation

1.7

Emergency procedures are followed in a driving emergency

2

Monitor and maintain vehicle performance

2.1

Performance position and efficiency of vehicle operation are monitored during use

2.2

Defective or irregular performance and malfunctions are reported to appropriate authority

2.3

Vehicle records are updated and maintained, and information is processed in accordance with workplace procedures

3

Deliver concrete to site

3.1

Pre-site check is completed before entry onto worksite in accordance with regulatory and workplace requirements

3.2

Personal protective equipment (PPE) is worn in accordance with workplace policy

3.3

Vehicle is parked and secured in accordance with manufacturer specifications, traffic regulations and workplace procedures

3.4

Ancillary equipment is attached and operated in accordance with workplace procedures and regulatory requirements

3.5

Concrete is discharged in accordance with customer requirements, and workplace policy and procedure

4

Finalise concrete delivery

4.1

Relevant documentation is completed on delivery of concrete, in accordance with customer requirements and workplace policy and procedure

4.2

Vehicle is cleaned in accordance with organisational policy and regulatory requirements

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

adjusting slump of concrete to meet customer requirements

applying knowledge of relevant regulations and workplace procedures

applying map reading and road navigation techniques to agitator operation

applying precautions and required action to minimise, control or eliminate identified hazards

cleaning vehicle in accordance with workplace, environmental and regulatory standards

communicating effectively with others

completing relevant documentation

conducting pre-site worksite checks

correcting positioning and charging of agitator

discharging concrete using concrete pump, wheelbarrow, kibble and chutes

following operational instructions

modifying activities depending on operational contingencies, risk situations and environments

monitoring and anticipating traffic hazards and taking appropriate action

monitoring vehicle performance and taking appropriate action as required

operating agitator and ancillary equipment

reading and interpreting relevant instructions, procedures, information and signs

reporting and rectifying within limits of own role, identified problems, faults and malfunctions in accordance with regulatory requirements and workplace procedures

selecting and using required personal protective equipment, conforming to industry and work health and safety (WHS)/occupational health and safety (OHS) standards

using ancillary equipment

working collaboratively with others.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

driving hazards and related defensive driving techniques

effect of different slumps on vehicle stability

factors that may cause traffic delays and diversions, and related action that can be taken

map reading and vehicle navigation

pre-operational vehicle checks and related action

pre-site check workplace procedures

procedures for measuring mass to ensure compliance with axle weight

procedures to be followed in a driving emergency

procedures to be followed when concrete is charged and discharged

relevant state/territory roads and traffic authority road rules, regulations, permit and licence requirements

relevant WHS/OHS and environmental procedures and regulations.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.