NTISthis.com

Evidence Guide: TLID3023 - Use specialised liquid bulk gas transfer equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

TLID3023 - Use specialised liquid bulk gas transfer equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Plan work

  1. Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards
  2. Gas transfer method is identified for loading and unloading as liquefied or gaseous state
  3. Precautions are undertaken to eliminate all ignition sources
  4. Specialised handling requirements for particular gas are identified and relevant workplace procedures are taken into account when planning work
  5. Traffic flow, vehicle positioning and work area conditions are assessed to ensure safe operation and no injury to people, or damage to equipment, loads or facilities
  6. Characteristics of gas, transfer and holding method are taken into account when evaluating procedural requirements, special precautions for method, equipment and, as required, appropriate attachments to transfer load
  7. Potential occurrences in work area that may affect safety and efficiency of operations are reported to appropriate personnel
  8. Gas transfer is planned, taking into account requirements of load, transfer method, storage facility, transport mode, load weight, volume, viscosity and equipment capacity
  9. Load is checked prior to and at completion of transfer to ensure ullage and/or maximum permitted capacity complies with current ADG Code
  10. Adjustments are made to process to accommodate special requirements such as temperature control and combustion
  11. Required personal protective equipment, signage, barriers and special precautions are identified in plan and utilised
  12. Workplace procedures to deal with leakages and ruptures are identified
Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Gas transfer method is identified for loading and unloading as liquefied or gaseous state

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Precautions are undertaken to eliminate all ignition sources

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Specialised handling requirements for particular gas are identified and relevant workplace procedures are taken into account when planning work

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Traffic flow, vehicle positioning and work area conditions are assessed to ensure safe operation and no injury to people, or damage to equipment, loads or facilities

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Characteristics of gas, transfer and holding method are taken into account when evaluating procedural requirements, special precautions for method, equipment and, as required, appropriate attachments to transfer load

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Potential occurrences in work area that may affect safety and efficiency of operations are reported to appropriate personnel

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Gas transfer is planned, taking into account requirements of load, transfer method, storage facility, transport mode, load weight, volume, viscosity and equipment capacity

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Load is checked prior to and at completion of transfer to ensure ullage and/or maximum permitted capacity complies with current ADG Code

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Adjustments are made to process to accommodate special requirements such as temperature control and combustion

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Required personal protective equipment, signage, barriers and special precautions are identified in plan and utilised

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace procedures to deal with leakages and ruptures are identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Transfer material

  1. Equipment is prepared and appropriate attachment is fitted
  2. Equipment controls are checked for correct operational status before commencing transfer
  3. Instruments and gauges are monitored during operations to ensure operation is within manufacturer specifications, enterprise schedule and safety requirements
  4. Speed of operation is managed for safety and efficiency of materials movement and equipment operations
  5. Faults or damage to equipment are immediately reported to appropriate personnel
Equipment is prepared and appropriate attachment is fitted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment controls are checked for correct operational status before commencing transfer

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Instruments and gauges are monitored during operations to ensure operation is within manufacturer specifications, enterprise schedule and safety requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Speed of operation is managed for safety and efficiency of materials movement and equipment operations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Faults or damage to equipment are immediately reported to appropriate personnel

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Monitor and operate controls

  1. Equipment controls are monitored and operated in accordance with manufacturer operating instructions
  2. Control systems are monitored in accordance with statutory authority regulations, manufacturer guidelines and site workplace procedures
  3. Gas is transferred ensuring no injury to personnel or damage to equipment or goods
  4. Faults are identified and reported in accordance with workplace procedures
Equipment controls are monitored and operated in accordance with manufacturer operating instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Control systems are monitored in accordance with statutory authority regulations, manufacturer guidelines and site workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Gas is transferred ensuring no injury to personnel or damage to equipment or goods

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Faults are identified and reported in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete operations

  1. Equipment is shut down in accordance with manufacturer guidelines without injury to personnel or damage to equipment, loads or facilities in accordance with workplace procedures
  2. Clean up methods for transfer equipment are completed in accordance with workplace procedures
  3. Equipment is secured in accordance with workplace procedures for appropriate equipment
  4. Workplace documentation is completed and filed in accordance with workplace procedures
Equipment is shut down in accordance with manufacturer guidelines without injury to personnel or damage to equipment, loads or facilities in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Clean up methods for transfer equipment are completed in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment is secured in accordance with workplace procedures for appropriate equipment

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace documentation is completed and filed in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan work

1.1

Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards

1.2

Gas transfer method is identified for loading and unloading as liquefied or gaseous state

1.3

Precautions are undertaken to eliminate all ignition sources

1.4

Specialised handling requirements for particular gas are identified and relevant workplace procedures are taken into account when planning work

1.5

Traffic flow, vehicle positioning and work area conditions are assessed to ensure safe operation and no injury to people, or damage to equipment, loads or facilities

1.6

Characteristics of gas, transfer and holding method are taken into account when evaluating procedural requirements, special precautions for method, equipment and, as required, appropriate attachments to transfer load

1.7

Potential occurrences in work area that may affect safety and efficiency of operations are reported to appropriate personnel

1.8

Gas transfer is planned, taking into account requirements of load, transfer method, storage facility, transport mode, load weight, volume, viscosity and equipment capacity

1.9

Load is checked prior to and at completion of transfer to ensure ullage and/or maximum permitted capacity complies with current ADG Code

1.10

Adjustments are made to process to accommodate special requirements such as temperature control and combustion

1.11

Required personal protective equipment, signage, barriers and special precautions are identified in plan and utilised

1.12

Workplace procedures to deal with leakages and ruptures are identified

2

Transfer material

2.1

Equipment is prepared and appropriate attachment is fitted

2.2

Equipment controls are checked for correct operational status before commencing transfer

2.3

Instruments and gauges are monitored during operations to ensure operation is within manufacturer specifications, enterprise schedule and safety requirements

2.4

Speed of operation is managed for safety and efficiency of materials movement and equipment operations

2.5

Faults or damage to equipment are immediately reported to appropriate personnel

3

Monitor and operate controls

3.1

Equipment controls are monitored and operated in accordance with manufacturer operating instructions

3.2

Control systems are monitored in accordance with statutory authority regulations, manufacturer guidelines and site workplace procedures

3.3

Gas is transferred ensuring no injury to personnel or damage to equipment or goods

3.4

Faults are identified and reported in accordance with workplace procedures

4

Complete operations

4.1

Equipment is shut down in accordance with manufacturer guidelines without injury to personnel or damage to equipment, loads or facilities in accordance with workplace procedures

4.2

Clean up methods for transfer equipment are completed in accordance with workplace procedures

4.3

Equipment is secured in accordance with workplace procedures for appropriate equipment

4.4

Workplace documentation is completed and filed in accordance with workplace procedures

Required Skills and Knowledge

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Plan work

1.1

Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards

1.2

Gas transfer method is identified for loading and unloading as liquefied or gaseous state

1.3

Precautions are undertaken to eliminate all ignition sources

1.4

Specialised handling requirements for particular gas are identified and relevant workplace procedures are taken into account when planning work

1.5

Traffic flow, vehicle positioning and work area conditions are assessed to ensure safe operation and no injury to people, or damage to equipment, loads or facilities

1.6

Characteristics of gas, transfer and holding method are taken into account when evaluating procedural requirements, special precautions for method, equipment and, as required, appropriate attachments to transfer load

1.7

Potential occurrences in work area that may affect safety and efficiency of operations are reported to appropriate personnel

1.8

Gas transfer is planned, taking into account requirements of load, transfer method, storage facility, transport mode, load weight, volume, viscosity and equipment capacity

1.9

Load is checked prior to and at completion of transfer to ensure ullage and/or maximum permitted capacity complies with current ADG Code

1.10

Adjustments are made to process to accommodate special requirements such as temperature control and combustion

1.11

Required personal protective equipment, signage, barriers and special precautions are identified in plan and utilised

1.12

Workplace procedures to deal with leakages and ruptures are identified

2

Transfer material

2.1

Equipment is prepared and appropriate attachment is fitted

2.2

Equipment controls are checked for correct operational status before commencing transfer

2.3

Instruments and gauges are monitored during operations to ensure operation is within manufacturer specifications, enterprise schedule and safety requirements

2.4

Speed of operation is managed for safety and efficiency of materials movement and equipment operations

2.5

Faults or damage to equipment are immediately reported to appropriate personnel

3

Monitor and operate controls

3.1

Equipment controls are monitored and operated in accordance with manufacturer operating instructions

3.2

Control systems are monitored in accordance with statutory authority regulations, manufacturer guidelines and site workplace procedures

3.3

Gas is transferred ensuring no injury to personnel or damage to equipment or goods

3.4

Faults are identified and reported in accordance with workplace procedures

4

Complete operations

4.1

Equipment is shut down in accordance with manufacturer guidelines without injury to personnel or damage to equipment, loads or facilities in accordance with workplace procedures

4.2

Clean up methods for transfer equipment are completed in accordance with workplace procedures

4.3

Equipment is secured in accordance with workplace procedures for appropriate equipment

4.4

Workplace documentation is completed and filed in accordance with workplace procedures

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant legislation and workplace procedures

communicating effectively with others

implementing contingency plans

interpreting and following operational instructions and prioritising work

modifying activities depending on operational contingencies, risk situations and environments

monitoring performance of transfer equipment

operating and adapting to differences in transfer equipment in accordance with workplace procedures

reading and interpreting relevant instructions, workplace procedures, information and signs

reporting and/or rectifying identified problems, faults or malfunctions promptly, in accordance with regulatory requirements and workplace procedures

servicing transfer equipment in terms of maintenance schedule and standard workplace procedures

working systematically with required attention to detail without injury to self or others, or damage to product or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

current Australian Dangerous Goods (ADG) Code and relevant state/territory mass and loading regulations as they apply to vehicles transporting liquid bulk gas

hazard management consistent with the principle of hierarchy of control with elimination, substitution, isolation and engineering control measures being selected before safe working practices and personal protective equipment

housekeeping standards and procedures

methods of securing a vehicle following transferring liquid bulk gas

relevant permit and licence requirements

risks when transferring liquid bulk gas and related precautions to control the risk

work health and safety (WHS)/occupational health and safety (OHS) procedures and guidelines for using specialised bulk transfer equipment

workplace procedures and policies for efficiently using specialised equipment to transfer liquid bulk gas.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.