The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Position and stabilise crane
|
|
Crane is driven to position as per job plan to ensure safe operation in accordance with applicable Australian standards, codes of practice, manufacturers specifications and, where applicable, regulatory and local government requirements Completed |
Evidence:
|
Where appropriate, barriers, fencing, temporary boundaries, signage and the like are used to isolate working area in accordance with safe working practice and lift requirements Completed |
Evidence:
|
Ground is checked to ensure it is firm enough to bear the load Completed |
Evidence:
|
Appropriate plates or packing are correctly used to adequately distribute the load Completed |
Evidence:
|
Any outriggers and stabilisers are correctly deployed and positioned in accordance with manufacturers instructions and the appropriate Australian standard and other relevant statutory regulations or local authority requirements Completed |
Evidence:
|
Outrigger packing is checked for adequacy prior to and after load is taken Completed |
Evidence:
|
Operate vehicle-mounted crane
|
|
Planned hazard control strategies are implemented Completed |
Evidence:
|
Required signals are correctly given, interpreted and followed in accordance with appropriate Australian standards Completed |
Evidence:
|
Load mass is assessed and correlated with lifting capacity of crane throughout proposed radii of operation Completed |
Evidence:
|
Appropriate lifting gear is selected and load secured Completed |
Evidence:
|
Load is hoisted and lowered into position using crane movements in accordance with the appropriate Australian standard Completed |
Evidence:
|
Crane controls are operated smoothly Completed |
Evidence:
|
Crane is shut down and secured during periods of non-operation according to manufacturers specifications and workplace procedures Completed |
Evidence:
|
Monitor lift conditions
|
|
Load is constantly monitored to ensure load and structural stability Completed |
Evidence:
|
Conditions which may affect the continuing stability of the crane are identified and monitored Completed |
Evidence:
|
Unplanned situations are responded to in line with workplace procedures in a manner that minimises risk to personnel and equipment Completed |
Evidence:
|
Advice is sought from supervisor where there is doubt about correct response to unanticipated conditions, or conflict with customer request Completed |
Evidence:
|
Supervisor/allocator is advised of any concern about completing the job within timeframe Completed |
Evidence:
|
Shut-down procedures are implemented in accordance with manufacturers instructions in the event of an emergency Completed |
Evidence:
|
The relevant motion locks and brakes are applied Completed |
Evidence:
|
Crane is shut down using the correct sequence of procedures in accordance with manufacturers specifications and workplace procedures Completed |
Evidence:
|
Routine post-operational equipment checks are carried out in accordance with manufacturers specifications Completed |
Evidence:
|
Pack up crane
|
|
All lifting equipment and crane components are checked for any signs of deterioration or damage in accordance with the appropriate Australian standard Completed |
Evidence:
|
Damaged or worn equipment is segregated and reported to an authorised person for testing/repair/destruction Completed |
Evidence:
|
Crane equipment is correctly stowed and secured in accordance with manufacturers instructions and the appropriate Australian standard Completed |
Evidence:
|
Crane is immobilised and secured for travel in accordance with manufacturers instructions, workplace guidelines and regulatory requirements Completed |
Evidence:
|
Complete job records
|
|
Customer feedback is sought regarding satisfaction with the completed job and any areas of concern reported according to workplace procedures Completed |
Evidence:
|
Customer's signature on job completion documentation is obtained Completed |
Evidence:
|
Required workplace records are updated accurately and promptly and processed according to workplace procedures Completed |
Evidence:
|