NTISthis.com

Evidence Guide: TLID3043A - Shift loads using gantry equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

TLID3043A - Shift loads using gantry equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Plan work for the prevailing working conditions

  1. Traffic flow, weather and work area conditions are constantly assessed and anticipated to allow safe operation to ensure no injury to people, or damage to equipment, loads or facilities
  2. Characteristics of the load are taken into account to ensure that, where applicable, appropriate attachments/gear are used to move the load
  3. Any occurrences in the work area that may affect the safety and efficiency of operations are reported to the appropriate personnel
Traffic flow, weather and work area conditions are constantly assessed and anticipated to allow safe operation to ensure no injury to people, or damage to equipment, loads or facilities

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Characteristics of the load are taken into account to ensure that, where applicable, appropriate attachments/gear are used to move the load

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Any occurrences in the work area that may affect the safety and efficiency of operations are reported to the appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use controls and operating systems to manage the operation of the equipment

  1. Equipment is prepared and appropriate attachments fitted (where applicable)
  2. Gear and operational levers are checked to ensure that they are in the neutral position prior to inserting ignition key and starting engine
  3. Engine is started in accordance with manufacturers guidelines to bring the engine to speed
  4. Instruments and gauges are monitored during start-up and operations to ensure that operation is within manufacturers specifications and workplace and regulatory safety requirements
  5. Engine power is managed for efficiency of equipment movement and economy of equipment operations
  6. Equipment operations are conducted within manufacturers specified torque range
  7. Any faults or damage to equipment are immediately reported to the appropriate personnel
Equipment is prepared and appropriate attachments fitted (where applicable)

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Gear and operational levers are checked to ensure that they are in the neutral position prior to inserting ignition key and starting engine

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engine is started in accordance with manufacturers guidelines to bring the engine to speed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Instruments and gauges are monitored during start-up and operations to ensure that operation is within manufacturers specifications and workplace and regulatory safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Engine power is managed for efficiency of equipment movement and economy of equipment operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment operations are conducted within manufacturers specified torque range

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Any faults or damage to equipment are immediately reported to the appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Locate load and identify load characteristics

  1. Load is located and identified according to instructions
  2. Requirements for Safe Working Load (SWL) and Working Load Limit (WLL) of the gantry equipment are identified
  3. Load weight and dimensions are checked to ensure they fall within the capacity of the equipment
  4. Loading and unloading plans are followed to ensure efficiency and safety of operations
  5. Characteristics of the load are taken into account to ensure that appropriate loading and unloading procedures are followed
  6. Hazardous cargo is identified and relevant procedures are taken into account when planning and conducting the work
Load is located and identified according to instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Requirements for Safe Working Load (SWL) and Working Load Limit (WLL) of the gantry equipment are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Load weight and dimensions are checked to ensure they fall within the capacity of the equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Loading and unloading plans are followed to ensure efficiency and safety of operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Characteristics of the load are taken into account to ensure that appropriate loading and unloading procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazardous cargo is identified and relevant procedures are taken into account when planning and conducting the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safely move load

  1. Equipment is operated and positioned using smooth and controlled movements
  2. Manoeuvres are within the limits of the equipment and in line with manufacturers specifications
  3. Load is moved ensuring no injury to personnel or damage to equipment or cargo
  4. Continuous communication is maintained with personnel assisting the operator in the load movement operations using appropriate communications technology and procedures
  5. In the event of a safety incident or emergency, the equipment is immediately stopped and workplace emergency procedures followed
  6. Safety incidents and emergencies are reported in accordance with workplace procedures and regulatory requirements
Equipment is operated and positioned using smooth and controlled movements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manoeuvres are within the limits of the equipment and in line with manufacturers specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Load is moved ensuring no injury to personnel or damage to equipment or cargo

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Continuous communication is maintained with personnel assisting the operator in the load movement operations using appropriate communications technology and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

In the event of a safety incident or emergency, the equipment is immediately stopped and workplace emergency procedures followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety incidents and emergencies are reported in accordance with workplace procedures and regulatory requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor and operate controls

  1. Equipment controls are monitored and operated in accordance with manufacturers operating instructions
  2. Control systems are understood and acted upon in accordance with regulatory requirements, manufacturers guidelines and workplace operating procedures
  3. Control faults are identified and reported in accordance with enterprise guidelines
  4. Hazards in the work area are identified and appropriate measures are adopted to control the risks in accordance with regulatory requirements and workplace procedures
Equipment controls are monitored and operated in accordance with manufacturers operating instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control systems are understood and acted upon in accordance with regulatory requirements, manufacturers guidelines and workplace operating procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control faults are identified and reported in accordance with enterprise guidelines

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards in the work area are identified and appropriate measures are adopted to control the risks in accordance with regulatory requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Stop, shut down and secure equipment

  1. Equipment is brought to a controlled halt and shut down without injury to personnel or damage to equipment, loads or facilities in accordance with manufacturers guidelines and workplace procedures
  2. Equipment is secured in accordance with manufacturers instructions and workplace procedures
Equipment is brought to a controlled halt and shut down without injury to personnel or damage to equipment, loads or facilities in accordance with manufacturers guidelines and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is secured in accordance with manufacturers instructions and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:

the underpinning knowledge and skills

relevant legislation and workplace procedures

other relevant aspects of the range statement

Context of and specific resources for assessment

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Resources for assessment include:

a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or

access to an appropriate range of relevant operational situations in the workplace

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment, and

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

Method of assessment

Assessment of this unit must be undertaken by a registered training organisation

As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests

Practical assessment must occur:

through activities in an appropriately simulated environment at the registered training organisation, and/or

in an appropriate range of situations in the workplace

Required Skills and Knowledge

REQUIRED KNOWLEDGE AND SKILLS

This describes the essential knowledge and skills and their level required for this unit.

Required knowledge:

Australian and international codes, regulations, licence/permit requirements relevant to the use of gantry equipment to shift loads

Relevant OH&S and environmental protection procedures and guidelines

Workplace procedures and policies for the use of gantry equipment to shift loads

Focus of operation of work systems, equipment, management and site operating systems for the use of gantry equipment to shift loads

Problems that may occur when using gantry equipment to shift loads and appropriate action that can be taken to resolve the problems

Relevant safety codes and emergency procedures

Types of gantry equipment used to shift loads in terminals/wharves, their applications and procedures and precautions for their use

Requirements for Safe Working Load (SWL) and Working Load Limit (WLL) of gantry equipment

The marking and numbering systems for cargo

Relevant bond, quarantine or other legislative requirements

Required skills:

Communicate effectively with others when shifting loads using gantry equipment

Read and interpret instructions, procedures, information and labels relevant to the shifting of loads using gantry equipment

Identify cargo, container and goods, coding, ADG and IMDG markings and where applicable emergency information panels

Interpret and follow operational instructions and prioritise work

Complete documentation related to the shifting of loads using gantry equipment

Receive, acknowledge and send messages with appropriate communications equipment

Estimate the size, shape and special requirements of loads

Work collaboratively with others when shifting loads using gantry equipment

Adapt appropriately to cultural differences in the workplace, including modes of behaviour and interactions with others

Promptly report and/or rectify any identified problems, faults or malfunctions that may occur when shifting loads using gantry equipment in accordance with regulatory requirements and workplace procedures

Implement contingency plans for unanticipated situations that may arise when shifting loads using gantry equipment

Apply precautions and required action to minimise, control or eliminate hazards that may exist during the shifting of loads using gantry equipment

Monitor work activities in terms of planned schedule

Modify activities depending on differing operational contingencies, risk situations and environments

Apply fatigue management knowledge and techniques

Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Identify, select and use relevant equipment, processes and procedures when using gantry equipment to shift loads

Operate and adapt to differences in equipment in accordance with standard operating procedures

Apply effective eye-hand coordination to operational tasks

Monitor performance of equipment

Service equipment in terms of maintenance schedule and standard operating procedures

Check and replenish fluids and carry out lubrication processes in the course of work activities

Select and use required personal protective equipment conforming to industry and OH&S standards

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Work may be conducted:

in a range of work environments

by day or night

Customers may be:

internal or external

Workplaces may comprise:

large, medium or small worksites

Work may be conducted in:

limited or restricted spaces

exposed conditions

controlled or open environments

even or uneven surfaces

wet or dry surfaces

Cargo/freight may include:

goods/containers with specialist requirements, including temperature controlled goods and dangerous goods

Range of equipment may include:

various types of bridge and gantry cranes

Hazards in the work area may include exposure to:

chemicals

dangerous or hazardous substances

movements of equipment, goods, materials and vehicular traffic

Personal protective equipment may include:

gloves

safety headwear and footwear

safety glasses

two-way radios

protective clothing

high visibility clothing

Communication in the work area may include:

phone

fax

email

electronic data transfer (EDI)

RF systems

radio

oral, aural or signed communications

Personnel in work area may include:

workplace personnel

site visitors

contractors

official representatives

Consultative processes may involve:

staff members

management

union representatives

industrial relations, OH&S specialists

other professional or technical staff

Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:

company procedures

enterprise procedures

organisational procedures

established procedures

Information/documents may include:

goods identification numbers and codes

manifests, bar codes, and container identification/serial number

Australian and international codes of practice and regulations relevant to the shifting of loads using gantry equipment

Australian and international regulations and codes of practice for the handling and transport of dangerous goods and hazardous substances

operations manuals, job specifications and induction documentation

manufacturers specifications for equipment

workplace procedures and policies

supplier and/or client instructions

dangerous goods declarations and material safety data sheets

award, enterprise bargaining agreement, other industrial arrangements

relevant Australian standards and certification requirements

quality assurance procedures

emergency procedures

Applicable regulations and legislation may include:

relevant codes and regulations for the shifting of cargo/containers using gantry equipment

Australian and international regulations and codes of practice for the handling of dangerous goods and hazardous substances, including:

Australian and International Dangerous Goods Codes

Australian Marine Orders and the International Maritime Dangerous Goods Code

IATA Dangerous Goods by Air regulations

Australian and International Explosives Codes

relevant Australian Standards including AS 1418 and AS 2550

licence, patent or copyright arrangements

water and road use and licence arrangements

export/import/quarantine/bond requirements

marine orders

relevant state/territory OH&S and environmental protection legislation

workplace relations regulations

workers compensation regulations