NTISthis.com

Evidence Guide: TLIW2022A - Manufacture pallets using automated methods

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

TLIW2022A - Manufacture pallets using automated methods

What evidence can you provide to prove your understanding of each of the following citeria?

Plan production of pallets

  1. Job requirements are identified from order form, workplace instructions and/or job specifications
  2. Appropriate safety and shut-down procedures are followed
  3. Automated equipment is organised to produce the required pallets as per job specifications
  4. Communication with supervisor and other workers is maintained to ensure efficient work flow
Job requirements are identified from order form, workplace instructions and/or job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate safety and shut-down procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Automated equipment is organised to produce the required pallets as per job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Communication with supervisor and other workers is maintained to ensure efficient work flow

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up pallet production

  1. Start-up checks are completed according to workplace and manufacturers guidelines
  2. Appropriate workplace occupational health and safety and other regulatory procedures are followed
  3. Bearers and boards are inspected for compliance with workplace quality standards
Start-up checks are completed according to workplace and manufacturers guidelines

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate workplace occupational health and safety and other regulatory procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bearers and boards are inspected for compliance with workplace quality standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate automated pallet manufacturing equipment

  1. Bearers and boards are loaded into stack trays according to correct quantity/sequence
  2. Feed systems are maintained and monitored for correct work flow
  3. Machine componentry is monitored to ensure appropriate speed and operation
  4. Faults/problems with materials or componentry are identified and appropriate action is undertaken in accordance with workplace procedures
  5. Pallet quality is checked prior to removal from stacker
Bearers and boards are loaded into stack trays according to correct quantity/sequence

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Feed systems are maintained and monitored for correct work flow

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine componentry is monitored to ensure appropriate speed and operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults/problems with materials or componentry are identified and appropriate action is undertaken in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pallet quality is checked prior to removal from stacker

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete operations

  1. Machine shut-down is conducted according to workplace and manufacturers guidelines
  2. Waste materials are directed for disposal or recovery
  3. Production records are completed in accordance with workplace procedures
  4. Maintenance program (where applicable) is completed and recorded
Machine shut-down is conducted according to workplace and manufacturers guidelines

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste materials are directed for disposal or recovery

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Production records are completed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintenance program (where applicable) is completed and recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:

the underpinning knowledge and skills

relevant legislation and workplace procedures

other relevant aspects of the range statement

Context of and specific resources for assessment

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Resources for assessment include:

a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or

access to an appropriate range of relevant operational situations in the workplace

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment, and

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

Method of assessment

Assessment of this unit must be undertaken by a registered training organisation

As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests

Practical assessment must occur:

through activities in an appropriately simulated environment at the registered training organisation, and/or

in an appropriate range of situations in the workplace

Required Skills and Knowledge

REQUIRED KNOWLEDGE AND SKILLS

This describes the essential knowledge and skills and their level required for this unit.

Required knowledge:

Regulations relevant to the manufacture of pallets using automated methods

Relevant OH&S and environmental protection procedures and guidelines

Workplace procedures and policies for the manufacture of pallets using automated methods

Focus of operation of work systems, equipment, management and site operating systems for the manufacture of pallets using automated methods

Problems that may occur when manufacturing pallets using automated methods and appropriate action that can be taken to resolve the problems

Documentation and record requirements

Equipment used during the manufacture of pallets using automated methods and the precautions and procedures that should be followed in its use

Housekeeping standards and procedures required in the workplace

Site layout and obstacles

Required skills:

Communicate effectively with others when manufacturing pallets using automated methods

Read and interpret instructions, procedures, information and labels relevant to the manufacture of pallets using automated methods

Interpret and follow operational instructions and prioritise work

Complete documentation related to the manufacture of pallets using automated methods

Operate electronic communication equipment to required protocol

Work collaboratively with others when manufacturing pallets using automated methods

Adapt appropriately to cultural differences in the workplace, including modes of behaviour and interactions with others

Promptly report and/or rectify any identified problems, faults or malfunctions that may occur when manufacturing pallets using automated methods in accordance with regulatory requirements and workplace procedures

Apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities

Plan own work including predicting consequences and identifying improvements

Monitor work activities in terms of planned schedule

Modify activities depending on differing operational contingencies, risk situations and environments

Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Maintain automated pallet manufacturing machinery

Carry out visual inspection of board quality to Australian Standards AS 2858 and AS 2082

Identify, select and efficiently and effectively use relevant materials and equipment when manufacturing pallets using automated methods

Adapt to differences in materials and equipment in accordance with standard operating procedures

Select and use required personal protective equipment conforming to industry and OH&S standards

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Work may be conducted:

in a range of work environments by day or night

Customers may be:

internal or external

Workplaces may comprise:

large, medium or small worksites

Workplace environment may include:

movement of equipment, goods, products, materials and vehicular traffic

The automated production process is conducted:

as part of manufacture/repair activities with the operator using discretion and judgement within established specifications

Timber may be:

hardwood or softwood

Major components of pallet machine may include:

control panel

boards

stackers

hoppers

conveyors

nail bowls

nail chucks

cams

control switches

Visual assessment may cover the requirements of Australian Standards AS 2858 or AS 2082 and specifically includes:

timber types and species

timber characteristics

end condition of the timber

OH&S requirements include:

manual handling, protective clothing, elimination/control of hazards, machine isolation and machine guarding

Hazards in the work area may include exposure to:

chemicals

dangerous or hazardous substances

stationary and moving equipment, parts and materials

noise, light, energy sources

electrical equipment

humidity, air temperature, radiant heat

debris on floor

faulty racking

poorly stacked materials or finished pallets

faulty equipment

Personal protective equipment may include:

gloves

safety headwear and footwear

safety glasses

two-way radios

high visibility clothing

Consultative processes may involve:

workplace personnel

supervisors and managers

customers/clients

suppliers

contractors

union representatives

industrial relations and OH&S specialists

other professional or technical staff

Communication in the work area may include:

phone

fax

email

internet

barcode readers

oral, aural or signed communications

Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:

company procedures

enterprise procedures

organisational procedures

established or standard procedures

Information/documents may include:

job specifications and workplace operating procedures

relevant Australian or international standards

manufacturers specifications for equipment/tools

supplier and/or client instructions

quality assurance standards for pallet manufacture

material safety data sheets (where applicable)

codes of practice including the National Standards for Manual Handling and the Industry Safety Code

relevant regulations including the ADG Code

award, enterprise bargaining agreement, other industrial arrangements

standards and certification requirements

emergency procedures

Applicable regulations and legislation may include:

relevant codes and regulations pertaining to pallet manufacture

Australian Standards AS 2858 and AS 2082

relevant state/territory OH&S legislation

relevant state/territory environmental protection legislation

licence, patent or copyright arrangements

ADG Code and regulations

workplace relations regulations including equal opportunity, equal employment opportunity and affirmative action legislation

workers compensation regulations