The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare and plan welding method
|
|
Work requirements are determined to identify scope of work and resources required Completed |
Evidence:
|
Welding equipment and consumables are prepared and checked for serviceability Completed |
Evidence:
|
Site is cleared of obstructions and combustible material to minimise risk of accidents and fire Completed |
Evidence:
|
Fire fighting and other safety equipment is organised, checked and located in accordance with required regulations Completed |
Evidence:
|
Personnel are briefed about safety precautions specific to aluminothermic welding as required to minimise risk of injury Completed |
Evidence:
|
Prepare rail for welding
|
|
Location of weld is identified and assessed in accordance with standards and procedures Completed |
Evidence:
|
Track is prepared for welding in accordance with workplace standards and procedures Completed |
Evidence:
|
Rail is prepared for welding in accordance with workplace standards and procedures Completed |
Evidence:
|
Carry out welding process
|
|
Moulds are fitted and luted to standard to prevent leakage of the molten reaction Completed |
Evidence:
|
Rails are pre-heated to standard to prevent heat loss Completed |
Evidence:
|
Rails are welded using aluminothermic method in accordance with approved procedures Completed |
Evidence:
|
Welding equipment is removed according to approved procedures Completed |
Evidence:
|
Excess material is removed from weld in accordance with workplace procedures Completed |
Evidence:
|
Rail profile is restored to standard using rail profile grinder in accordance with workplace procedures Completed |
Evidence:
|
Arrangements are made for track to be restored Completed |
Evidence:
|
Check weld conformance
|
|
Finish ground weld area is visually inspected for surface finish and defects Completed |
Evidence:
|
Finish ground weld area is checked for conformance to rail profile and geometry acceptance standards Completed |
Evidence:
|
Complete documentation
|
|
Required documentation and/or records are completed in accordance with workplace requirements Completed |
Evidence:
|