NTISthis.com

Evidence Guide: TLIW3043 - Weld rail on tram/light rail systems using electric welding process

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

TLIW3043 - Weld rail on tram/light rail systems using electric welding process

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare rails, crossings or switches for welding

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Weld repair area is identified and assessed in accordance with standards and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Welding equipment and consumables are prepared and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards are identified, risks are assessed and control measures are implemented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Weld repair area is prepared for welding in accordance with workplace standards and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Track components are assembled/aligned to specification as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assemble and set up welding equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Welding equipment is set up and adjusted to meet welding process requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Accessories and consumables are selected for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assemble and set up gouging and grinding equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Gouging and grinding equipment is assembled and set up

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment settings are adjusted to meet process requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Remove defect

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate method to be used to remove the defect is identified in accordance with organisational standards and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Defect is removed using identified method in accordance with organisational standards and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Perform welding operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Weld metal is applied to repair area to meet specifications in accordance with standards and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Welded area is cleaned in preparation for grinding

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Welded area is ground in accordance with organisational standards and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check weld conformance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finished ground weld area is visually inspected for surface finish and defects

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Finished ground weld area is checked for conformance to rail/crossing/switch profile rail industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete post-operative checks and documentation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Defective equipment is replaced and/or reported for servicing/repair in accordance with organisational policies and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Documentation is completed and processed in accordance with organisational requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare rails, crossings or switches for welding

1.1

Weld repair area is identified and assessed in accordance with standards and procedures

1.2

Welding equipment and consumables are prepared and checked for serviceability

1.3

Hazards are identified, risks are assessed and control measures are implemented

1.4

Weld repair area is prepared for welding in accordance with workplace standards and procedures

1.5

Track components are assembled/aligned to specification as required

2

Assemble and set up welding equipment

2.1

Welding equipment is set up and adjusted to meet welding process requirements

2.2

Accessories and consumables are selected for use

3

Assemble and set up gouging and grinding equipment

3.1

Gouging and grinding equipment is assembled and set up

3.2

Equipment settings are adjusted to meet process requirements

3.3

Accessories and consumables are selected for use

4

Remove defect

4.1

Appropriate method to be used to remove the defect is identified in accordance with organisational standards and procedures

4.2

Defect is removed using identified method in accordance with organisational standards and procedures

5

Perform welding operation

5.1

Weld metal is applied to repair area to meet specifications in accordance with standards and procedures

5.2

Welded area is cleaned in preparation for grinding

5.3

Welded area is ground in accordance with organisational standards and procedures

6

Check weld conformance

6.1

Finished ground weld area is visually inspected for surface finish and defects

6.2

Finished ground weld area is checked for conformance to rail/crossing/switch profile rail industry standards

7

Complete post-operative checks and documentation

7.1

Equipment is checked for serviceability

7.2

Defective equipment is replaced and/or reported for servicing/repair in accordance with organisational policies and procedures

7.3

Documentation is completed and processed in accordance with organisational requirements

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare rails, crossings or switches for welding

1.1

Weld repair area is identified and assessed in accordance with standards and procedures

1.2

Welding equipment and consumables are prepared and checked for serviceability

1.3

Hazards are identified, risks are assessed and control measures are implemented

1.4

Weld repair area is prepared for welding in accordance with workplace standards and procedures

1.5

Track components are assembled/aligned to specification as required

2

Assemble and set up welding equipment

2.1

Welding equipment is set up and adjusted to meet welding process requirements

2.2

Accessories and consumables are selected for use

3

Assemble and set up gouging and grinding equipment

3.1

Gouging and grinding equipment is assembled and set up

3.2

Equipment settings are adjusted to meet process requirements

3.3

Accessories and consumables are selected for use

4

Remove defect

4.1

Appropriate method to be used to remove the defect is identified in accordance with organisational standards and procedures

4.2

Defect is removed using identified method in accordance with organisational standards and procedures

5

Perform welding operation

5.1

Weld metal is applied to repair area to meet specifications in accordance with standards and procedures

5.2

Welded area is cleaned in preparation for grinding

5.3

Welded area is ground in accordance with organisational standards and procedures

6

Check weld conformance

6.1

Finished ground weld area is visually inspected for surface finish and defects

6.2

Finished ground weld area is checked for conformance to rail/crossing/switch profile rail industry standards

7

Complete post-operative checks and documentation

7.1

Equipment is checked for serviceability

7.2

Defective equipment is replaced and/or reported for servicing/repair in accordance with organisational policies and procedures

7.3

Documentation is completed and processed in accordance with organisational requirements

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least five separate occasions and include:

applying relevant safeworking and workplace procedures

ensuring weld conforms to organisational requirements

identifying job hazards and taking required action to minimise, control or eliminate identified hazards

implementing contingency plans

interpreting and following operational instructions and prioritising work

modifying activities depending on operational contingencies, risk situations and environments

monitoring work activities in terms of planned schedule

operating and adapting to differences in equipment in accordance with operating procedures

performing welding grinding, gouging and testing operations on rails, crossings or switches systems using electric welding processes in accordance with workplace procedures

preparing items for welding according to workplace requirements

reading and interpreting relevant technical data, drawings, instructions and manuals

reporting and/or rectifying identified problems, faults or malfunctions, in accordance with organisational procedures

selecting and using hand tools, power tools and equipment

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

documentation and record keeping requirements

fundamentals of tram track and components

hazards that may exist when welding rail using an electric welding process and ways of controlling the risks involved

problems that may occur when welding rail using an electric welding process and action that can be taken to report or resolve these problems

rail industry standards for weld repairs on rail

relevant rail danger zones

relevant safety data sheets (SDSs)/material safety data sheets (MSDSs) workplace procedures

relevant safety, work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations

track standards for tram rail, crossing and switch condition and surface profile

workplace procedures for removing defects by gouging, grinding and welding rail using an electric welding process.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.