NTISthis.com

Evidence Guide: UEECD0002 - Analyse static and dynamic parameters of electrical equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEECD0002 - Analyse static and dynamic parameters of electrical equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to analyse static and dynamic parameters

  1. Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS risk control measures and workplace procedures in preparation for the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine analysis is determined from performance specifications and/or reports and in consultation with relevant person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Activities are planned in accordance with workplace procedures for timelines in consultation with others involved

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Strategies are identified, developed and implemented

  1. WHS/OHS risk control work measures and workplace procedures for carrying out the work are followed
WHS/OHS risk control work measures and workplace procedures for carrying out the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Statics and dynamics are applied to developing analytical solutions to machine parameters

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Parameters, specifications and performance requirements of the machine/s are obtained in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine parameters are analysed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unplanned events are responded to in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Quality of work is monitored in accordance with workplace procedures and/or relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Document and report results of the analysis

  1. Solutions to machine analysis are tested and modified as required in accordance with WHS/OHS requirements and workplace procedures
Solutions to machine analysis are tested and modified as required in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Analysis of findings, calculations and assumptions are documented in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Analysis is reported to relevant person/s for action

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Justification and instruction for actions are documented in work and/or development records in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least two separate occasions and include:

analysing machine parameters

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including

using risk control measures

dealing with unplanned events in accordance with problem-solving techniques and workplace procedures

documenting and reporting results of the analysis of static and dynamic parameters of machines

documenting instructions for implementing any actions resulting from the analysis

forming effective strategies for analysing machine performance

obtaining machine parameters, specifications and performance requirements

preparing to analyse static and dynamic parameters of machinery

testing the results of the analysis.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

function of mechanical parts and components

problem-solving techniques

relevant analysis testing methods

relevant development and implementation strategies

relevant industry standards

relevant machine parameters, specifications and performance requirements

relevant manufacturer specifications and operating instructions

relevant job safety assessments or risk mitigation processes

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace quality, instructions, policies and procedures.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package. Companion Volume Implementation Guide.