NTISthis.com

Evidence Guide: UEECD0020 - Fix and secure electrotechnology equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEECD0020 - Fix and secure electrotechnology equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to fix and secure electrotechnologyequipment

  1. Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards are identified, risks are assessed and control measures are implemented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Scope of work to be undertaken is obtained from relevant documentation and/or from work supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Advice is sought from work supervisor to ensure work is coordinated effectively with others

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials required for the work are identified and obtained in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fixing devices are selected for their suitability for the environment, weight of the load they are supporting and sub-stratums into which they are being installed in accordance with manufacturer specifications and safe load limits

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Supporting accessories/equipment are selected for their suitability for the environment and ability to support and protect from damage in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install fixing and support devices

  1. Exposed and/or conductive parts, plant or machinery are confirmed as isolated in consultation with authorised person
Exposed and/or conductive parts, plant or machinery are confirmed as isolated in consultation with authorised person

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS risk control measures relevant to work site are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fixing devices are installed in accordance with manufacturer instructions, regulatory requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Support accessories/equipment are installed accurately in accordance with industry technical standards, regulatory requirements and job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is carried out without waste of materials or damage to apparatus or circuits, the surrounding environment or services and using sustainable energy practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete fixing and support work

  1. WHS/OHS risk control measures for work completion are followed
WHS/OHS risk control measures for work completion are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Worksite is tidied and tools and equipment cleaned and securely stored in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relevant personnel are notified of work completion in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant workplace health and safety (WHS)/occupational health and safety (OHS) requirements

applying sustainable energy principles and practices

communicating effectively with relevant stakeholders

completing fixing and support work to electrotechnology equipment

completing workplace documentation

ensuring exposed and/or conductive parts, plant or machinery are isolated by an authorised person

installing a fixing device and accessory capable of supporting up to 20 kilograms (kg) on the metal plate

using appropriate fixing methods, tools and devices to install fixings to hollow walls, solid walls, brick, concrete and steel

installing, aligning and adjusting fixing devices in accordance with manufacturer instructions and load limits, including installing relevant fixing support accessories/equipment

maintaining a clean worksite and equipment

selecting relevant fixing devices suitable for the environment they are being installed for loads, including:

less-than 5 kg

5-20 kg

20-50 kg

selecting the correct device for supporting, fixing and protecting wiring/cabling/piping and functional accessories

using fixing adhesives and tapes safely in accordance with manufacturer instructions and load limits

using power drills, including selecting and changing drill bits and drill speeds.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

devices, tools, equipment and methods for supporting, fixing and protecting electrotechnology equipment wiring/cabling/piping and functional accessories, including:

hollow walls, wood, masonry blocks, plasterboard and panelling

fixing to metal

solid walls, including masonry and concrete structures

vertical and horizontal surfaces

fixing adhesives and tapes

securing and mounting types, load limits and safe installation

support accessories/equipment

relevant electrical regulations and legislations

relevant job safety assessments or risk mitigation processes

relevant electrotechnology equipment manufacturer specifications

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace policies and procedures

sustainable energy principles and practices.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Fixing and securing electrotechnology equipment must include:

installation

maintenance or development work functions