NTISthis.com

Evidence Guide: UEECS0030 - Set up, configure and test biometric devices

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEECS0030 - Set up, configure and test biometric devices

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to set up and test biometrics devices

  1. Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Scope of device, set-up and configuration work is determined from job specifications and in consultation with relevant person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relevant person/s is consulted to ensure work is coordinated effectively with others involved on the worksite

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hardware, software and materials required for work are obtained in accordance with workplace procedures and job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and testing devices needed to carry out work are obtained and checked for correct operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up and test biometric devices

  1. Circuits/equipment are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
Circuits/equipment are checked and isolated in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Layout of biometric system network hardware, cabling and outlets is determined from job specifications and/or in consultation with relevant person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hardware is set up in accordance with network requirements, workplace procedures and job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Biometric devices are set up and configured in accordance with network requirements, workplace procedures and job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Biometric devices on a network are tested and anomalies identified and corrected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Biometric device failures are responded to and rectified in accordance with network requirements, workplace procedures and job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Biometric device work is carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identified causes of reported problems are rectified and biometric devices are tested in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unplanned situations are dealt with safely and with the approval of relevant person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete set-up and testing and report outcomes

  1. Work area is cleaned and made safe in accordance with workplace procedures
Work area is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Biometric device installation and maintenance records are maintained in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service report is completed and forwarded to relevant person/s in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including the use of risk control measures

carrying out biometric device work efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices

checking and isolating circuits/equipment

completing set-up, testing and reporting

dealing with unplanned situations

determining layout of biometric system network hardware, cabling and outlets

identifying and rectifying problems

obtaining hardware, software and materials required for work

placing equipment in accordance with regulatory and customer requirements

preparing to set up and test biometrics devices

responding to system anomalies to effect functionality of devices

selecting appropriate equipment

setting up and testing biometric devices

testing and verifying functional operation of devices.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

biometric device tools, software and testing techniques

biometrics techniques and processes, including definitions, terminology, advantages, disadvantages and applications

legal aspects of biometrics

physical interaction with biometric devices, including operation and installation of biometric devices (e.g. iris scanners, hand scanners, voice recognition apparatus, facial recognition devices and relevant equipment)

problem-solving techniques

relevant hardware, software and materials

relevant manufacturer specifications and operating instructions

relevant job safety assessments or risk mitigation processes

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace policies and procedures

sustainable energy principles.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Setting up and testing must include at least the following:

four different types of biometric devices